BMW Z8 2000-2003 ZF 5HP Transmission Specifications
Comprehensive technical specifications and operational details for the ZF-5HP automatic transmission system used in the 2000-2003 BMW Z8. This document covers transmission design, gear ratios, fluid requirements, torque converter specifications, and diagnostic procedures specific to the BMW Z8.
Overview Specifications
Comprehensive description of the ZF-5HP transmission specifications for the 2000-2003 BMW Z8, including key features, measurements, and technical details
How to Use
Use the search function to locate specific ZF-5HP transmission specifications by entering keywords such as 'torque converter', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Transmission Type
5-speed automatic
Maximum Torque Capacity
450 Nm (332 lb-ft)
Fluid Capacity
9.5 liters (10 quarts)
Weight
85 kg (187 lbs)
Service Interval
60,000-80,000 km (37,000-50,000 miles)
Available Specifications
Transmission Design and Features
Detailed description of the ZF-5HP transmission's design, features, and operational characteristics
Transmission Design and Features
Detailed description of the ZF-5HP transmission's design, features, and operational characteristics
Transmission Type and Configuration
- 5-speed automatic transmission with adaptive shift control
- Electronically controlled hydraulic system
- Integrated torque converter with lock-up clutch
- Compact and lightweight design for improved performance
Adaptive Shift Control
- Dynamic shift adaptation based on driving conditions
- Self-learning capability for driver behavior
- Smooth and precise gear changes
- Enhanced fuel efficiency and driving comfort
Note: Adaptive shift control requires proper transmission fluid and regular maintenance.
Technical Specifications
Detailed technical specifications of the ZF-5HP transmission, including measurements and performance data
Technical Specifications
Detailed technical specifications of the ZF-5HP transmission, including measurements and performance data
Gear Ratios
- 1st gear: 3.57:1
- 2nd gear: 2.20:1
- 3rd gear: 1.51:1
- 4th gear: 1.00:1
- 5th gear: 0.80:1
- Reverse gear: 3.40:1
Torque Converter Specifications
- Lock-up clutch engagement speed: 45-55 km/h (28-34 mph)
- Maximum torque capacity: 450 Nm (332 lb-ft)
- Stall speed: 2200-2400 rpm
- Fluid capacity: 9.5 liters (10 quarts)
Note: Ensure proper torque converter fluid levels for optimal performance.
Maintenance and Service
Guidelines for maintaining and servicing the ZF-5HP transmission to ensure longevity and reliability
Maintenance and Service
Guidelines for maintaining and servicing the ZF-5HP transmission to ensure longevity and reliability
Fluid Requirements
- Recommended fluid: ZF Lifeguard 5
- Fluid change interval: 60,000-80,000 km (37,000-50,000 miles)
- Fluid capacity during service: 7.5 liters (8 quarts)
- Fluid temperature range: -40°C to 150°C (-40°F to 302°F)
Service Procedures
- Regular inspection of transmission mounts and linkages
- Check for leaks and fluid contamination
- Reset adaptive shift control after fluid change
- Use diagnostic tools for error code retrieval
Note: Always follow BMW's recommended service intervals and procedures.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 5-speed automatic
- Manufacturer
- ZF Friedrichshafen AG
- Model
- 5HP24
- Part Number
- 24 00 2 229 123
- Application
- 2000-2003 BMW Z8
- Fluid Type
- BMW ATF LT 71141
- Fluid Capacity
- 9.5 liters
Dimensions And Weight
- Length
- 720 mm
- Width
- 420 mm
- Height
- 380 mm
- Weight
- 95 kg
Gear Ratios
- 1st Gear
- 3.57:1
- 2nd Gear
- 2.20:1
- 3rd Gear
- 1.51:1
- 4th Gear
- 1.00:1
- 5th Gear
- 0.80:1
- Reverse Gear
- 3.40:1
Torque Capacity
- Maximum input Torque
- 440 Nm
- Maximum Output Torque
- 600 Nm
Operational Parameters
- Maximum Engine Speed
- 6500 rpm
- Maximum Vehicle Speed
- 250 km/h
- Shift Points
- Upshift: 6000 rpmDownshift: 4500 rpm
- Temperature Range
- Operating Min: -40°COperating Max: 120°C
Hydraulic System
- Pump Type
- Gear pump
- Pump Pressure
- 15 bar
- Valve Body Part Number
- 24 00 2 229 124
- Filter Part Number
- 24 00 2 229 125
Clutch Pack
- Clutch Type
- Multi-plate wet clutch
- Number Of Clutches
- 5
- Clutch Material
- Friction paper with steel plates
- Clutch Clearance
- 0.5-0.7 mm
Electronic Control
- Control Module Part Number
- 24 00 2 229 126
- Sensors
-
- Input speed sensor
- Output speed sensor
- Transmission fluid temperature sensor
- Solenoids
-
- Shift solenoid A
- Shift solenoid B
- Pressure control solenoid
Maintenance Specifications
- Fluid Change interval
- 60,000 miles or 48 months
- Filter Change interval
- 60,000 miles or 48 months
- Torque Converter Drain Interval
- 120,000 miles or 96 months
- Seal inspection Interval
- 30,000 miles or 24 months
Diagnostic Specifications
- Diagnostic Tool
- BMW DIS or INPA
- Fault Codes
-
- P0700 - Transmission Control System Malfunction
- P0715 - Input/Turbine Speed Sensor Circuit Malfunction
- P0720 - Output Speed Sensor Circuit Malfunction
- Diagnostic Procedures
-
- Check for stored fault codes
- Inspect wiring and connectors
- Perform solenoid resistance test
Service Information Service
Detailed service requirements and schedules for the ZF-5HP transmission in the 2000-2003 BMW Z8
- Inspect transmission fluid level and condition
- Check for leaks
- Inspect seals and gaskets
Replace fluid if contamination is detected
- Replace transmission fluid
- Replace transmission filter
- Inspect valve body and solenoids
Use only BMW ATF LT 71141 fluid
- Drain and refill torque converter
- Inspect clutch pack
- Perform full diagnostic scan
Replace torque converter if necessary
Common Questions
Find answers to common questions about torque specifications
Q1 What is the fluid capacity of the ZF-5HP transmission in a 2000-2003 BMW Z8?
What is the fluid capacity of the ZF-5HP transmission in a 2000-2003 BMW Z8?
The ZF-5HP transmission in the 2000-2003 BMW Z8 has a fluid capacity of approximately 9.5 liters (10 quarts) when performing a complete fluid exchange. Always refer to the manufacturer's specifications for exact measurements.
Q2 What type of transmission fluid is recommended for the ZF-5HP transmission?
What type of transmission fluid is recommended for the ZF-5HP transmission?
The ZF-5HP transmission requires a high-quality, synthetic automatic transmission fluid (ATF) that meets BMW specification LT 71141. Using the correct fluid is critical for optimal performance and longevity.
Q3 How often should the transmission fluid be changed in the ZF-5HP transmission?
How often should the transmission fluid be changed in the ZF-5HP transmission?
BMW recommends changing the transmission fluid and filter every 60,000 to 100,000 miles under normal driving conditions. Severe driving conditions may require more frequent service intervals.
Q4 What are the common symptoms of a failing ZF-5HP transmission?
What are the common symptoms of a failing ZF-5HP transmission?
Common symptoms include delayed or harsh shifting, slipping gears, unusual noises (whining or grinding), and transmission fluid leaks. If any of these symptoms occur, immediate inspection and service are recommended.
Q5 Can the ZF-5HP transmission be rebuilt, or does it require replacement?
Can the ZF-5HP transmission be rebuilt, or does it require replacement?
The ZF-5HP transmission can be rebuilt by a qualified technician using genuine or OEM parts. Rebuilding is often more cost-effective than replacement and can restore the transmission to like-new performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
ZF-5HP Transmission Service Manual
Coming SoonOfficial service manual for the ZF-5HP transmission, including detailed repair procedures, torque specifications, and troubleshooting guides.
BMW Z8 Technical Specifications
Coming SoonComprehensive technical specifications for the 2000-2003 BMW Z8, including engine, transmission, and drivetrain details.
Transmission Fluid Compatibility Guide
Coming SoonA guide to compatible transmission fluids for the ZF-5HP transmission, including BMW-approved products and alternatives.
ZF-5HP Transmission Rebuild Kit
Coming SoonGenuine ZF-5HP transmission rebuild kits, including seals, gaskets, and friction components for a complete overhaul.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.