BMW Z4 2018-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2018-Present BMW Z4. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2018-Present BMW Z4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
3.0 liters (2998 cc)
Horsepower
382 hp (285 kW)
Torque
369 lb-ft (500 Nm)
Compression Ratio
10.2:1
Fuel Economy
26 mpg (combined)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum power output: 382 hp (285 kW) at 5000-6500 rpm
- Peak torque: 369 lb-ft (500 Nm) at 1600-4500 rpm
- Redline: 7000 rpm
- Compression ratio: 10.2:1
- Direct injection system with high-pressure fuel pump
Acceleration and Top Speed
- 0-60 mph acceleration: 4.4 seconds
- Top speed: 155 mph (electronically limited)
- Drag coefficient: 0.29 Cd
- Power-to-weight ratio: 6.5 lb/hp
- TwinPower Turbo technology for enhanced performance
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Block and Components
- Aluminum alloy engine block for reduced weight
- Forged steel crankshaft for durability
- Double VANOS variable valve timing
- Valvetronic fully variable valve lift system
- Closed-deck design for increased rigidity
Cooling and Lubrication
- Water-to-air intercooler for efficient cooling
- Dual electric cooling fans
- Oil capacity: 6.5 liters (6.9 quarts)
- Oil pump with variable displacement
- Thermostatically controlled oil cooler
Note: Regular maintenance of the cooling and lubrication systems is essential for optimal engine performance.
Fuel and Emissions
Information on the fuel system, efficiency, and emissions compliance of the 3.0l-engine.
Fuel and Emissions
Information on the fuel system, efficiency, and emissions compliance of the 3.0l-engine.
Fuel System
- Direct fuel injection with 200 bar pressure
- Fuel tank capacity: 14.5 gallons (55 liters)
- Combined fuel economy: 26 mpg
- High-pressure fuel pump with integrated pressure sensor
- Start-stop function for improved efficiency
Emissions Control
- EU6d-TEMP emissions standard compliant
- Dual catalytic converters with oxygen sensors
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced emissions
- Onboard diagnostics (OBD) system for emissions monitoring
Note: The engine is designed to meet stringent global emissions standards.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Service Intervals
- Oil change interval: 10,000 miles or 12 months
- Spark plug replacement: 60,000 miles
- Air filter replacement: 30,000 miles
- Coolant flush: 50,000 miles or 5 years
- Timing chain inspection: 100,000 miles
Key Maintenance Procedures
- Use only BMW-approved synthetic oil (SAE 5W-30)
- Check and top off coolant levels regularly
- Inspect and clean the air intake system periodically
- Monitor engine oil level using the onboard system
- Follow BMW's Condition Based Service (CBS) for maintenance alerts
Note: Adhering to the recommended maintenance schedule is crucial for engine longevity.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Part Number
- 11002442010
Performance
- Max Power
- 382 hp @ 6500 rpm
- Max Torque
- 369 lb-ft @ 1600-4500 rpm
- Redline
- 7000 rpm
- Compression Ratio
- 11.0:1
- Bore
- 82.0 mm
- Stroke
- 94.6 mm
Fuel System
- injection Type
- Direct injection
- injection Pressure
- 200 bar
- Fuel Pump Type
- High-pressure electric fuel pump
- Fuel Filter Part Number
- 13327709222
- Fuel Rail Pressure Sensor Part Number
- 13627803765
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Coolant Type
- BMW Antifreeze/Coolant (G48)
- Water Pump Type
- Electric
- Radiator Part Number
- 17117586982
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20 or 0W-30
- Oil Filter Part Number
- 11427837969
- Oil Pump Type
- Variable displacement
- Oil Pressure
- 3.5-4.5 bar at 2000 rpm
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138616153
- Ignition Timing
- Fully electronic, variable
- Spark Plug Torque
- 23 Nm
Emissions
- Emission Standard
- EU6d, LEV III
- Catalytic Converter Part Number
- 18307585203
- Oxygen Sensor Part Number
- 11787558025
- Exhaust Gas Recirculation
- Integrated into turbocharger
- Particulate Filter
- Integrated into exhaust system
Turbocharger
- Type
- Twin-scroll turbocharger
- Boost Pressure
- 1.2 bar
- Wastegate Control
- Electronic
- Turbocharger Part Number
- 11657849001
- intercooler Type
- Air-to-air
- intercooler Part Number
- 17117586983
Valvetrain
- Valve Configuration
- DOHC, 4 valves per cylinder
- Valve Material
- Hollow-stem intake valves, sodium-filled exhaust valves
- Valve Clearance
- Hydraulic, self-adjusting
- Camshaft Part Number
- 11367585421
- Timing Chain Type
- Double-row, maintenance-free
Engine Management
- Ecu Type
- Bosch MEVD17.2
- Software Version
- V1.23.0
- Diagnostic interface
- OBD-II
- Sensor References
- Crankshaft Position Sensor Part Number: 12147596161Camshaft Position Sensor Part Number: 12147596162Knock Sensor Part Number: 12147596163
Maintenance
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Inspection Interval
- 100000 miles
- Coolant Replacement interval
- 4 years or 60000 miles
- Air Filter Replacement interval
- 30000 miles
- Fuel Filter Replacement interval
- 60000 miles
Diagnostics
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tools
-
- BMW ISTA
- Autologic
- Launch X431
- Sensor Tolerances
- Oxygen Sensor Voltage Range: 0.1-0.9 VCrankshaft Sensor Resistance: 480-1000 ohmsCamshaft Sensor Resistance: 1000-2000 ohms
- Compression Test Specifications
- Minimum Compression: 10 barMaximum Variation Between Cylinders: 1 bar
Service Information Service
Detailed service requirements and schedules for the 3.0l-engine
- Engine oil and filter change
- Inspect cooling system for leaks
- Check and top off all fluid levels
- Inspect drive belts for wear
Use only BMW-approved fluids and filters
- Replace engine air filter
- Inspect spark plugs
- Check turbocharger system for leaks
- Inspect exhaust system
Replace spark plugs if necessary
- Replace spark plugs
- Replace fuel filter
- Replace coolant
- Inspect timing chain and tensioners
Perform compression test if engine performance is degraded
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0l-engine in the 2018-Present BMW Z4?
What is the horsepower and torque output of the 3.0l-engine in the 2018-Present BMW Z4?
The 3.0l inline-6 turbocharged engine in the 2018-Present BMW Z4 produces 382 horsepower at 5,000-6,500 rpm and 369 lb-ft of torque at 1,600-4,500 rpm.
Q2 What type of fuel system does the 3.0l-engine use?
What type of fuel system does the 3.0l-engine use?
The 3.0l-engine utilizes a direct fuel injection system, which ensures precise fuel delivery and optimal combustion efficiency.
Q3 What is the recommended oil type and capacity for the 3.0l-engine?
What is the recommended oil type and capacity for the 3.0l-engine?
The recommended oil type is BMW TwinPower Turbo Longlife-01 FE 0W-20 or 0W-30. The oil capacity is approximately 6.5 liters (6.9 quarts).
Q4 What is the compression ratio of the 3.0l-engine?
What is the compression ratio of the 3.0l-engine?
The compression ratio of the 3.0l-engine is 10.2:1, which contributes to its balance of power and efficiency.
Q5 Does the 3.0l-engine require premium fuel?
Does the 3.0l-engine require premium fuel?
Yes, the 3.0l-engine requires premium unleaded fuel with an octane rating of 91 or higher for optimal performance and to prevent engine knocking.
Q6 What is the service interval for spark plugs on the 3.0l-engine?
What is the service interval for spark plugs on the 3.0l-engine?
The spark plugs should be replaced every 60,000 miles or as specified in the vehicle's maintenance schedule to ensure proper engine performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW Z4 3.0l Engine Technical Specifications
Coming SoonDetailed technical specifications and performance data for the 3.0l-engine in the BMW Z4.
BMW Z4 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2018-Present BMW Z4, including service intervals for the 3.0l-engine.
BMW Genuine Parts Catalog
Coming SoonCatalog of genuine BMW parts for the 3.0l-engine, ensuring compatibility and performance.
BMW Z4 Owner's Manual
Coming SoonOfficial owner's manual for the 2018-Present BMW Z4, including detailed information on the 3.0l-engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.