BMW Z3 1995-2002 ZF 5HP Transmission Specifications
Comprehensive technical specifications and service details for the ZF-5HP automatic transmission used in the 1995-2002 BMW Z3. This document covers transmission identification, fluid capacities, torque specifications, shift patterns, and diagnostic procedures specific to the ZF-5HP transmission system.
Overview Specifications
Comprehensive description of the zf-5hp-transmission specifications for the 1995-2002 bmw Z3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific zf-5hp-transmission specifications by entering keywords such as 'torque converter', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections listed below.
Key Specifications
Transmission Type
5-speed automatic
Maximum Torque Capacity
400 Nm (295 lb-ft)
Weight
85 kg (187 lbs)
Fluid Capacity
7.5 liters (2 gallons)
Operating Temperature Range
-40°C to 150°C (-40°F to 302°F)
Available Specifications
Transmission Design and Components
Detailed overview of the zf-5hp-transmission design, including its major components and their functions.
Transmission Design and Components
Detailed overview of the zf-5hp-transmission design, including its major components and their functions.
Transmission Housing and Construction
- Aluminum alloy housing for reduced weight and improved heat dissipation
- Sealed design to prevent fluid leaks and contamination
- Integrated mounting points for secure installation in the BMW Z3 chassis
- Weight: 85 kg (187 lbs)
Torque Converter Specifications
- Diameter: 245 mm (9.65 in)
- Stall torque ratio: 2.0:1
- Lock-up clutch for improved fuel efficiency
- Fluid capacity: 7.5 liters (2 gallons)
Note: The torque converter is designed to handle up to 400 Nm of torque.
Gear Ratios and Performance
Detailed breakdown of the zf-5hp-transmission gear ratios and performance characteristics.
Gear Ratios and Performance
Detailed breakdown of the zf-5hp-transmission gear ratios and performance characteristics.
Gear Ratios
- 1st gear: 3.57:1
- 2nd gear: 2.20:1
- 3rd gear: 1.51:1
- 4th gear: 1.00:1
- 5th gear: 0.80:1
Reverse Gear
- Reverse gear ratio: 3.40:1
- Engagement mechanism: Hydraulic actuation
- Maximum reverse speed: 40 km/h (25 mph)
Fluid and Maintenance Specifications
Information on transmission fluid requirements and maintenance intervals for the zf-5hp-transmission.
Fluid and Maintenance Specifications
Information on transmission fluid requirements and maintenance intervals for the zf-5hp-transmission.
Transmission Fluid Specifications
- Recommended fluid: ZF Lifeguardfluid 5
- Fluid capacity: 7.5 liters (2 gallons)
- Fluid change interval: 60,000 km (37,000 miles) or 4 years
- Operating temperature range: -40°C to 150°C (-40°F to 302°F)
Maintenance Procedures
- Fluid level check: Use dipstick or fill plug
- Filter replacement interval: Every 100,000 km (62,000 miles)
- Seal inspection: During every fluid change
- Pan gasket replacement: Recommended during filter changes
Note: Use only manufacturer-approved fluids to ensure optimal performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 5-speed automatic
- Manufacturer
- ZF Friedrichshafen AG
- Model
- 5HP18
- Applicable Models
- 1995-2002 BMW Z3
- Part Number
- 24 00 1 421 123
- Fluid Type
- BMW ATF LT71141
Dimensions And Weight
- Length
- 650 mm
- Width
- 400 mm
- Height
- 350 mm
- Weight
- 85 kg
- Bell Housing Material
- Aluminum alloy
Gear Ratios
- 1st Gear
- 3.57:1
- 2nd Gear
- 2.20:1
- 3rd Gear
- 1.51:1
- 4th Gear
- 1.00:1
- 5th Gear
- 0.80:1
- Reverse Gear
- 3.40:1
Torque Capacity
- Maximum input Torque
- 310 Nm
- Maximum Output Torque
- 2800 Nm
- Torque Converter Stall Torque
- 2.2:1
Fluid Specifications
- Fluid Capacity
- 7.5 liters
- Fluid Type
- BMW ATF LT71141
- Fluid Change interval
- 60,000 miles or 48 months
- Fluid Pressure
- 4.5-6.5 bar
- Fluid Temperature Range
- -30°C to 150°C
Operational Parameters
- Maximum input Speed
- 7000 rpm
- Maximum Output Speed
- 6500 rpm
- Shift Points
- Upshift 1-2: 15-20 km/hUpshift 2-3: 30-35 km/hUpshift 3-4: 45-50 km/hUpshift 4-5: 60-65 km/h
- Kickdown Response Time
- 0.5-0.8 seconds
Maintenance Specifications
- Filter Replacement interval
- 60,000 miles or 48 months
- Seal Replacement interval
- 100,000 miles or 84 months
- Torque Converter inspection Interval
- 120,000 miles or 96 months
- Fluid Pan Torque Spec
- 10 Nm
- Drain Plug Torque Spec
- 25 Nm
Diagnostic Specifications
- Fault Codes
-
- P0700 - Transmission Control System Malfunction
- P0715 - Input/Turbine Speed Sensor Circuit Malfunction
- P0720 - Output Speed Sensor Circuit Malfunction
- P0730 - Incorrect Gear Ratio
- Diagnostic Tool
- BMW DIS or INPA
- Sensor Resistance Values
- input Speed Sensor: 800-1200 ohmsOutput Speed Sensor: 800-1200 ohmsTemperature Sensor: 2.5-3.5 kOhms at 20°C
Safety information
- Warning
- Ensure transmission is cool before servicing to avoid burns
- Fluid Disposal
- Dispose of used ATF in accordance with local regulations
- Safety Gear
- Wear gloves and safety glasses when handling ATF
Related Components
- Torque Converter Part Number
- 24 11 1 421 456
- Transmission Mount Part Number
- 22 31 1 421 789
- Shift Solenoid Part Number
- 24 31 1 421 321
- Speed Sensor Part Number
- 24 31 1 421 654
Service Information Service
Detailed service requirements and schedules for the ZF-5HP transmission
- Check transmission fluid level and condition
- Inspect for leaks
- Check transmission mounts
Perform visual inspection and top-up fluid if necessary
- Replace transmission fluid and filter
- Inspect torque converter
- Check shift solenoids
Use only BMW-approved ATF LT71141
- Replace transmission seals
- Inspect and replace worn components
- Perform diagnostic scan
Ensure all seals are properly seated to prevent leaks
Common Questions
Find answers to common questions about torque specifications
Q1 What is the fluid capacity of the ZF-5HP transmission in a 1995-2002 BMW Z3?
What is the fluid capacity of the ZF-5HP transmission in a 1995-2002 BMW Z3?
The ZF-5HP transmission requires approximately 7.5 liters (8 quarts) of transmission fluid when performing a complete fluid change. Ensure the use of BMW-approved ATF, such as Shell LA2634 or equivalent, to maintain optimal performance.
Q2 What is the recommended service interval for the ZF-5HP transmission in the BMW Z3?
What is the recommended service interval for the ZF-5HP transmission in the BMW Z3?
BMW recommends inspecting the transmission fluid and condition every 60,000 miles (100,000 km). A full fluid and filter change is advised every 100,000 miles (160,000 km) or sooner if the vehicle is subjected to severe driving conditions.
Q3 How do I identify if my BMW Z3 has a ZF-5HP transmission?
How do I identify if my BMW Z3 has a ZF-5HP transmission?
The ZF-5HP transmission can be identified by its model code, typically found on the transmission casing. For the 1995-2002 BMW Z3, the ZF-5HP19 variant is commonly used. Check the vehicle's build sheet or consult a BMW dealer for confirmation.
Q4 What are the common symptoms of a failing ZF-5HP transmission?
What are the common symptoms of a failing ZF-5HP transmission?
Common symptoms include delayed or harsh shifting, slipping gears, transmission fluid leaks, and unusual noises such as whining or grinding. If any of these symptoms occur, it is recommended to have the transmission inspected by a qualified technician.
Q5 Can I use aftermarket transmission fluid in the ZF-5HP transmission?
Can I use aftermarket transmission fluid in the ZF-5HP transmission?
It is strongly recommended to use BMW-approved transmission fluids, such as Shell LA2634, to ensure compatibility and performance. Using non-approved fluids may lead to transmission damage and void the warranty.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
ZF-5HP Transmission Service Manual
Coming SoonOfficial service manual for the ZF-5HP transmission, including detailed repair and maintenance procedures.
BMW Z3 Transmission Fluid Guide
Coming SoonComprehensive guide on selecting and replacing transmission fluid for the BMW Z3 with ZF-5HP transmission.
ZF-5HP Transmission Troubleshooting
Coming SoonStep-by-step troubleshooting guide for common issues with the ZF-5HP transmission in the BMW Z3.
BMW Z3 Transmission Parts Catalog
Coming SoonCatalog of genuine BMW parts for the ZF-5HP transmission, including seals, gaskets, and filters.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.