BMW X7 2019-present Fuel System Specifications
Comprehensive technical specifications for the fuel system of the 2019-Present BMW X7, covering fuel type, pressure, injector details, and pump performance. Essential for technicians and enthusiasts.
Overview Specifications
Comprehensive description of the fuel specifications for the 2019-Present BMW X7, including key features, measurements, and technical details
How to Use
Use the search function to locate specific fuel specifications by entering keywords such as 'fuel type', 'tank capacity', or 'octane rating'.
Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Fuel Tank Capacity
21.9 gallons (83 liters)
Recommended Octane Rating
91 AKI (95 RON)
Fuel Pump Flow Rate
200 liters/hour (53 gallons/hour)
Combined Fuel Economy
19 mpg (12.4 L/100 km)
CO2 Emissions
223 g/km
Available Specifications
Fuel Type and Quality
This section covers the recommended fuel types, quality standards, and octane ratings for optimal performance of the BMW X7.
Fuel Type and Quality
This section covers the recommended fuel types, quality standards, and octane ratings for optimal performance of the BMW X7.
Recommended Fuel Type
- Premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher
- Minimum octane rating of 89 AKI (91 RON) is acceptable but may reduce performance
- Use of lower octane fuel may cause engine knocking and reduced efficiency
- Ethanol content should not exceed 10% (E10)
Fuel Quality Standards
- Fuel must meet ASTM D4814 (US) or EN 228 (Europe) standards
- Avoid using fuel with metallic additives or high sulfur content
- Use of Top Tier detergent gasoline is recommended for engine cleanliness
- Ensure fuel is free from water contamination
Note: Using substandard fuel may void the vehicle's warranty.
Fuel Tank Specifications
This section provides details on the fuel tank capacity, materials, and design features of the BMW X7.
Fuel Tank Specifications
This section provides details on the fuel tank capacity, materials, and design features of the BMW X7.
Fuel Tank Capacity
- Total fuel tank capacity: 21.9 gallons (83 liters)
- Reserve fuel capacity: 2.6 gallons (10 liters)
- Fuel tank material: High-density polyethylene (HDPE)
- Tank design includes impact-resistant baffles for safety
Fuel Tank Design
- Dual-chamber design for improved fuel slosh control
- Integrated fuel pump and level sensor assembly
- Tank is positioned for optimal weight distribution
- Includes a rollover valve for safety
Fuel System Components
This section outlines the key components of the fuel system, including the fuel pump, injectors, and filters.
Fuel System Components
This section outlines the key components of the fuel system, including the fuel pump, injectors, and filters.
Fuel Pump Specifications
- Electric fuel pump with a flow rate of 200 liters/hour (53 gallons/hour)
- Operating pressure: 5.8 bar (84 psi)
- Pump is located inside the fuel tank for cooling and noise reduction
- Includes a built-in pressure regulator
Fuel Injectors
- Direct fuel injection system with piezo-electric injectors
- Injector flow rate: 15 cc/second at 3 bar
- Precision-controlled spray pattern for efficient combustion
- Designed for high-pressure operation up to 200 bar
Note: Regular maintenance of injectors is recommended to prevent clogging.
Fuel Efficiency and Emissions
This section details the fuel efficiency ratings and emissions standards for the BMW X7.
Fuel Efficiency and Emissions
This section details the fuel efficiency ratings and emissions standards for the BMW X7.
Fuel Efficiency
- City fuel economy: 17 mpg (13.8 L/100 km)
- Highway fuel economy: 23 mpg (10.2 L/100 km)
- Combined fuel economy: 19 mpg (12.4 L/100 km)
- Range on a full tank: Approximately 416 miles (670 km)
Emissions Standards
- Complies with Euro 6d-TEMP and ULEV II emissions standards
- Equipped with a catalytic converter and particulate filter
- CO2 emissions: 223 g/km (combined)
- NOx emissions: 0.02 g/km
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Fuel Type
- Recommended Fuel
- Premium unleaded gasoline (91 AKI or higher)
- Minimum Fuel
- Regular unleaded gasoline (87 AKI)
- Ethanol Content
- Up to 10% ethanol (E10)
- Notes
- Using fuel with higher ethanol content may void warranty
Fuel Tank
- Capacity
- 21.9 gallons (83 liters)
- Material
- High-density polyethylene
- Part Number
- 16117359901
- Pressure Rating
- 3.5 bar (50.8 psi)
- Notes
- Includes integrated fuel pump and level sensor
Fuel Pump
- Type
- Electric in-tank fuel pump
- Flow Rate
- 150 liters per hour (39.6 gallons per hour)
- Pressure
- 5.0 bar (72.5 psi)
- Part Number
- 16148659874
- Voltage
- 12V DC
- Notes
- Includes integrated fuel filter
Fuel injectors
- Type
- Direct injection (DI)
- Flow Rate
- 15.5 cc/min at 3.0 bar
- Part Number
- 13647586932
- Spray Pattern
- Multi-hole
- Notes
- High-pressure injectors for precise fuel delivery
Fuel Filter
- Type
- Integrated with fuel pump
- Replacement interval
- Every 60,000 miles or 60 months
- Part Number
- 16148659874
- Notes
- Non-serviceable, replace entire fuel pump assembly
Fuel Pressure
- Operating Pressure
- 200 bar (2900 psi)
- Tolerance
- +/- 10 bar (145 psi)
- Sensor Part Number
- 13627839245
- Notes
- Monitored by fuel pressure sensor for optimal performance
Fuel System Diagnostics
- Diagnostic Codes
-
- P0171
- P0172
- P0174
- P0175
- Diagnostic Tool
- BMW ISTA or compatible OBD-II scanner
- Notes
- Check fuel pressure, injector performance, and fuel trim values
Fuel System Maintenance
- injector Cleaning Interval
- Every 30,000 miles
- Fuel System Cleaner Part Number
- 83192458123
- Notes
- Use BMW-approved fuel system cleaner for maintenance
Fuel System Safety
- Fire Risk
- Avoid open flames or sparks near fuel system
- Pressure Release
- Depressurize system before servicing
- Notes
- Follow BMW repair manual procedures for safety
Fuel Quality Requirements
- Octane Rating
- 91 AKI or higher recommended
- Sulfur Content
- Less than 10 ppm
- Additives
- BMW-approved fuel additives only
- Notes
- Poor fuel quality may cause engine knocking or reduced performance
Fuel System Service Information Service
Detailed service requirements and schedules for the fuel system
- Inspect fuel lines and connections
- Check fuel injector performance
- Use fuel system cleaner
Follow BMW-recommended procedures
- Replace fuel filter (if applicable)
- Inspect fuel pump performance
- Check fuel pressure sensor readings
Replace fuel pump assembly if necessary
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What type of fuel is recommended for the 2019-Present BMW X7?
What type of fuel is recommended for the 2019-Present BMW X7?
The BMW X7 requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower octane fuel may result in reduced performance and efficiency.
Q2 What is the fuel tank capacity of the BMW X7?
What is the fuel tank capacity of the BMW X7?
The BMW X7 has a fuel tank capacity of 21.9 gallons (83 liters). This allows for extended driving ranges, especially on long-distance trips.
Q3 Can I use ethanol-blended fuel in the BMW X7?
Can I use ethanol-blended fuel in the BMW X7?
The BMW X7 is compatible with ethanol-blended fuels containing up to 10% ethanol (E10). However, fuels with higher ethanol concentrations, such as E85, are not recommended and may cause engine damage.
Q4 What is the fuel economy of the BMW X7?
What is the fuel economy of the BMW X7?
The fuel economy varies by engine type. For the xDrive40i model, the EPA-estimated fuel economy is 20 mpg city, 25 mpg highway, and 22 mpg combined. The xDrive50i model achieves 15 mpg city, 21 mpg highway, and 17 mpg combined.
Q5 Does the BMW X7 have a fuel-saving start-stop feature?
Does the BMW X7 have a fuel-saving start-stop feature?
Yes, the BMW X7 is equipped with an Auto Start-Stop function that automatically shuts off the engine when the vehicle is stationary, such as at traffic lights, to save fuel and reduce emissions.
Q6 What should I do if I accidentally use the wrong type of fuel?
What should I do if I accidentally use the wrong type of fuel?
If you accidentally use fuel with an octane rating below 91 or a high ethanol blend, avoid driving the vehicle and contact a BMW-certified technician immediately. Running the engine with improper fuel can cause severe damage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X7 Owner's Manual
Coming SoonThe official owner's manual provides detailed information on fuel specifications, usage, and maintenance tips specific to the BMW X7.
BMW Fuel Efficiency Guide
Coming SoonA comprehensive guide on maximizing fuel efficiency for BMW vehicles, including the X7, with tips on driving habits and maintenance.
BMW Genuine Parts Catalog
Coming SoonAccess the official catalog for genuine BMW parts, including fuel system components, to ensure optimal performance and warranty compliance.
BMW Service and Maintenance Schedule
Coming SoonDetailed service intervals and maintenance procedures for the BMW X7, including fuel system inspections and cleaning.
About the Author
Expert automotive knowledge and experience
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.