BMW X7 2019-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2019-Present BMW X7. Includes performance data, maintenance guidelines, and component-specific details.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2019-Present BMW X7, including key features, measurements, and technical details. This engine is a turbocharged inline-6 (B58) designed for optimal performance, efficiency, and reliability.
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'. Use exact terms for best results.
Navigate through the documentation using the table of contents or section headers. Click on a section to expand and view subsections and detailed technical information.
Key Specifications
Displacement
3.0 liters (2998 cc)
Power Output
335 hp (250 kW)
Torque
330 lb-ft (447 Nm)
Compression Ratio
11.0:1
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Performance
This section covers the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration metrics.
Engine Performance
This section covers the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration metrics.
Power and Torque
- Maximum power output: 335 hp (250 kW) at 5500-6500 rpm
- Peak torque: 330 lb-ft (447 Nm) at 1500-5200 rpm
- 0-60 mph acceleration: 5.8 seconds
- Top speed: 130 mph (electronically limited)
- Turbocharger: Twin-scroll turbo for improved response
Fuel Efficiency
- City fuel economy: 20 mpg
- Highway fuel economy: 25 mpg
- Combined fuel economy: 22 mpg
- Fuel type: Premium unleaded (91 octane or higher)
- CO2 emissions: 235 g/km
Note: Fuel efficiency may vary based on driving conditions and vehicle configuration.
Engine Design
This section provides detailed information about the engine's design, including its architecture, materials, and key components.
Engine Design
This section provides detailed information about the engine's design, including its architecture, materials, and key components.
Engine Architecture
- Engine type: Turbocharged inline-6 (B58)
- Displacement: 3.0 liters (2998 cc)
- Cylinder configuration: Inline
- Valvetrain: DOHC with Valvetronic and Double-VANOS
- Compression ratio: 11.0:1
Materials and Construction
- Engine block: Aluminum alloy
- Cylinder head: Aluminum alloy
- Crankshaft: Forged steel
- Pistons: Aluminum with friction-reducing coatings
- Turbocharger housing: High-temperature-resistant alloy
Note: The use of lightweight materials contributes to improved fuel efficiency and performance.
Cooling and Lubrication
This section covers the cooling and lubrication systems that ensure optimal engine performance and longevity.
Cooling and Lubrication
This section covers the cooling and lubrication systems that ensure optimal engine performance and longevity.
Cooling System
- Coolant capacity: 12.5 liters
- Radiator type: High-efficiency cross-flow
- Thermostat: Electronically controlled
- Coolant type: BMW-approved ethylene glycol-based
- Cooling fan: Electric, variable speed
Lubrication System
- Oil capacity: 6.5 liters
- Oil type: BMW TwinPower Turbo 0W-20 or 5W-30
- Oil filter: Cartridge-type with replaceable element
- Oil pump: Variable displacement
- Oil cooler: Integrated into the cooling system
Note: Regular oil changes are critical to maintaining engine performance and longevity.
Emission Control
This section details the emission control systems and technologies used in the 3.0l-engine to meet environmental standards.
Emission Control
This section details the emission control systems and technologies used in the 3.0l-engine to meet environmental standards.
Exhaust System
- Catalytic converter: Close-coupled three-way catalyst
- Exhaust gas recirculation (EGR): Cooled EGR system
- Particulate filter: Gasoline particulate filter (GPF)
- Oxygen sensors: Dual wideband sensors
- Exhaust manifold: Integrated into the cylinder head
Emission Standards
- Compliance: Euro 6d-TEMP and ULEV 50 standards
- NOx emissions: < 0.06 g/km
- HC emissions: < 0.10 g/km
- CO emissions: < 1.00 g/km
- Particulate matter: < 0.005 g/km
Note: The engine is designed to meet stringent global emission regulations.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- B58B30M1
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI or higher)
- Manufacturer
- BMW AG
- Part Number
- 11002440375
Performance
- Max Power
- 335 hp @ 5500-6500 rpm
- Max Torque
- 330 lb-ft @ 1500-5200 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph Time
- 5.8 seconds
- Top Speed
- 130 mph (electronically limited)
Dimensions And Weight
- Engine Length
- 22.8 in
- Engine Width
- 28.3 in
- Engine Height
- 24.4 in
- Dry Weight
- 403 lbs
- Oil Capacity
- 6.5 quarts
- Coolant Capacity
- 12.7 quarts
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 2900 psi
- Fuel Filter Part Number
- 13327840575
- Fuel Pump Part Number
- 16147392903
- injector Part Number
- 13647803163
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.028 in
- Ignition Coil Part Number
- 12138657273
- Ignition Timing
- Fully electronic with variable timing
Cooling System
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586951
- Water Pump Part Number
- 11518638101
- Coolant Type
- BMW Antifreeze/Coolant (G48)
- Coolant Mix Ratio
- 50:50 (coolant:water)
Lubrication System
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30 or equivalent
- Oil Filter Part Number
- 11428553806
- Oil Pressure
- 43-58 psi @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Emissions
- Emission Standard
- Tier 3 / LEV III
- Catalytic Converter Part Number
- 18307585281
- Oxygen Sensor Part Number
- 11787558025
- Exhaust Gas Recirculation
- Integrated into turbocharger system
Maintenance
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Timing Chain
- Lifetime maintenance-free
- Belt Drive
- Serpentine belt with automatic tensioner
- Belt Part Number
- 11287628651
- Tensioner Part Number
- 11287628652
Diagnostics
- Onboard Diagnostics
- OBD-II compliant
- Fault Code Reading
- BMW ISTA/D or compatible scan tool
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Connector Location
- Under dashboard, driver's side
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Oil and filter change
- Inspect cooling system
- Check engine air filter
- Inspect drive belts
Use only BMW-approved fluids and parts
- Replace spark plugs
- Inspect fuel system
- Check ignition system
- Inspect exhaust system
Follow torque specifications for spark plugs
- Replace engine air filter
- Replace cabin air filter
- Inspect and replace drive belts if necessary
- Check and replace coolant if necessary
Coolant replacement recommended every 4 years
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2019-Present BMW X7?
What is the horsepower and torque output of the 3.0L engine in the 2019-Present BMW X7?
The 3.0L turbocharged inline-6 engine in the BMW X7 produces 335 horsepower at 5,500-6,500 rpm and 330 lb-ft of torque at 1,500-5,200 rpm. This engine is part of the B58 engine family, known for its efficiency and performance.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine in the BMW X7 utilizes a direct fuel injection system, which optimizes fuel delivery for improved combustion efficiency and reduced emissions. It is designed to work with premium unleaded gasoline (91 octane or higher).
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The 3.0L engine requires synthetic motor oil meeting BMW Longlife-01 FE specification. The oil capacity is approximately 6.5 liters (6.9 quarts). Always refer to the owner's manual or service documentation for exact specifications.
Q4 Does the 3.0L engine feature any advanced technologies?
Does the 3.0L engine feature any advanced technologies?
Yes, the 3.0L engine includes BMW TwinPower Turbo technology, VALVETRONIC variable valve timing, and Double-VANOS camshaft adjustment. These technologies enhance performance, fuel efficiency, and throttle response.
Q5 What is the service interval for the 3.0L engine?
What is the service interval for the 3.0L engine?
BMW recommends an oil change every 10,000 miles or 12 months, whichever comes first. Other maintenance tasks, such as spark plug replacement, are typically due at 60,000 miles. Always follow the Condition Based Service (CBS) system in the vehicle.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X7 Owner's Manual
Coming SoonThe official owner's manual for the BMW X7, containing detailed information about the 3.0L engine, maintenance schedules, and operating instructions.
BMW Technical Service Bulletins
Coming SoonAccess the latest technical service bulletins (TSBs) for the 3.0L engine, including updates, recalls, and repair procedures.
BMW Genuine Parts Catalog
Coming SoonExplore the official BMW parts catalog to find genuine components for the 3.0L engine, ensuring optimal performance and warranty compliance.
BMW Service and Warranty Guide
Coming SoonA comprehensive guide to BMW's service and warranty policies, including coverage details and maintenance requirements for the 3.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.