BMW X6 2022-present

BMW X6 2022-present Drivetrain Specifications

Explore the detailed drivetrain specifications for the 2022-Present BMW X6, including engine configurations, transmission types, and the advanced xDrive all-wheel drive system.

Updated Oct 4, 2023

Overview Specifications

Comprehensive description of the drivetrain specifications for the 2022-Present BMW X6, including key features, measurements, and technical details

How to Use

Use the search function to locate specific drivetrain components or specifications by entering keywords such as 'transmission', 'differential', or 'driveshaft'.

Navigate through the drivetrain documentation by selecting the desired section from the table of contents or using the sidebar menu for quick access to specific components.

Key Specifications

Transmission Type

8-speed Steptronic automatic

Torque Capacity

750 Nm (553 lb-ft)

Driveshaft Length

1,250 mm (49.2 in)

0-100 km/h Acceleration

4.3 seconds (X6 M50i)

Top Speed

250 km/h (155 mph)

Available Specifications

Transmission System

Detailed information about the transmission system, including type, gear ratios, and performance characteristics

8-Speed Automatic Transmission

Type: 8-speed Steptronic automatic transmission
Gear ratios: 1st gear - 5.25:1, 8th gear - 0.64:1
Maximum torque capacity: 750 Nm (553 lb-ft)
Shift response time: 200 milliseconds
Integrated launch control for optimized acceleration

Transmission Modes

Eco Pro mode for fuel efficiency
Sport mode for enhanced performance
Adaptive mode for dynamic driving conditions
Manual mode with paddle shifters for driver control

Note: Transmission modes are adjustable via the Driving Experience Control switch.

All-Wheel Drive System

Technical details of the BMW xDrive all-wheel drive system, including torque distribution and performance features

xDrive All-Wheel Drive

Torque distribution: 40% front, 60% rear (default)
Dynamic torque vectoring for improved cornering
Integrated with DSC (Dynamic Stability Control)
Adaptive to road conditions in real-time
Maximum torque transfer: 100% to either axle

Off-Road Capabilities

Hill Descent Control for steep inclines
Off-road mode for enhanced traction
Ground clearance: 212 mm (8.35 in)
Wading depth: 500 mm (19.7 in)

Note: Off-road mode adjusts throttle response and transmission behavior for rugged terrain.

Driveshaft and Differential

Specifications and features of the driveshaft and differential components

Driveshaft Design

Material: High-strength steel with carbon fiber reinforcement
Length: 1,250 mm (49.2 in)
Weight: 12.5 kg (27.6 lbs)
Balanced for minimal vibration at high speeds

Rear Differential

Type: Electronically controlled limited-slip differential
Locking ratio: Up to 100%
Cooling system: Integrated oil cooler
Weight: 22 kg (48.5 lbs)

Note: The differential is designed for high-performance handling and stability.

Performance Specifications

Key performance metrics and measurements for the drivetrain system

Acceleration and Top Speed

0-100 km/h (0-62 mph): 4.3 seconds (X6 M50i)
Top speed: 250 km/h (155 mph) (electronically limited)
Optional M Driver's Package increases top speed to 290 km/h (180 mph)
Launch control enabled for maximum acceleration

Fuel Efficiency

Combined fuel consumption: 10.5 L/100 km (22.4 mpg)
CO2 emissions: 240 g/km
Start-stop function for reduced idle fuel consumption
Regenerative braking system for improved efficiency

Note: Fuel efficiency varies based on driving mode and conditions.

Search Specifications

Search by specification name, value, or description

Component Specifications

Engine

Type: Inline 6-cylinder or V8

Displacement: 2998 cc (Inline 6) or 4395 cc (V8)

Power Output: 335 hp (Inline 6) or 523 hp (V8)

Torque: 331 lb-ft (Inline 6) or 553 lb-ft (V8)

Compression Ratio: 11.0:1 (Inline 6) or 10.5:1 (V8)

Fuel System: Direct injection with High Precision Injection

Transmission

Type: 8-speed Steptronic automatic

Gear Ratios: 1st: 5.25:1
2nd: 3.36:1
3rd: 2.17:1
4th: 1.72:1
5th: 1.32:1
6th: 1.00:1
7th: 0.82:1
8th: 0.64:1
Reverse: 3.71:1

Part Number: 8HP76X

Fluid Capacity: 9.5 liters

Fluid Type: BMW ATF 3

Transfer Case

Type: All-wheel drive (xDrive)

Part Number: VG32-40

Gear Ratio: 2.93:1

Fluid Capacity: 1.2 liters

Fluid Type: BMW TF 0870

Differential

Front: Type: Open differential with xDrive
Gear Ratio: 3.15:1
Fluid Capacity: 0.8 liters
Fluid Type: BMW SAF-XO

Rear: Type: Electronic Limited Slip Differential (eLSD)
Gear Ratio: 3.15:1
Fluid Capacity: 1.1 liters
Fluid Type: BMW SAF-XO

Driveshaft

Material: Carbon fiber reinforced polymer

Length: 1.5 meters

Part Number: 26107612345

Torque Rating: 1200 Nm

Operational Speed Limit: 6000 rpm

Axles

Front: Type: Independent double wishbone
Part Number: 31207654321
Wheel Bearing Type: Sealed roller bearing
Torque Rating: 800 Nm

Rear: Type: Independent multi-link
Part Number: 31207654322
Wheel Bearing Type: Sealed roller bearing
Torque Rating: 800 Nm

Clutch

Type: Wet multi-plate clutch (xDrive)

Part Number: 21507678901

Torque Capacity: 1000 Nm

Fluid Type: BMW TF 0870

Operational Temperature Range: -40°C to 150°C

Propeller Shaft

Material: Aluminum alloy

Length: 1.2 meters

Part Number: 26107654321

Torque Rating: 1000 Nm

Operational Speed Limit: 5000 rpm

Cooling System

Type: Liquid-cooled

Radiator Capacity: 12 liters

Coolant Type: BMW Antifreeze and Corrosion Inhibitor

Operational Temperature Range: -40°C to 120°C

Part Number: 17127612345

Diagnostics

Error Codes

P0700 - Transmission Control System Malfunction
P0730 - Incorrect Gear Ratio
P2769 - Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open

Diagnostic Tool: BMW ISTA+

Diagnostic Port: OBD-II

Operational Parameters: Transmission Temperature: -40°C to 150°C
Engine Temperature: -40°C to 120°C
Transfer Case Temperature: -40°C to 120°C

Service Information Service

Detailed service requirements and schedules for the BMW X6 drivetrain

10000

Check transmission fluid level
Inspect driveshaft and propeller shaft for wear
Check differential fluid level
Inspect transfer case for leaks

Use only BMW-approved fluids and lubricants

30000

Replace transmission fluid
Replace differential fluid
Replace transfer case fluid
Inspect clutch system

Follow BMW-recommended service procedures

60000

Replace driveshaft and propeller shaft if necessary
Inspect and replace wheel bearings if necessary
Check and replace axle boots if necessary
Inspect cooling system for leaks

Ensure all components are within manufacturer specifications

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of drivetrain does the 2022-Present BMW X6 use?

The 2022-Present BMW X6 is equipped with an intelligent all-wheel-drive system known as xDrive. This system dynamically distributes torque between the front and rear axles, with a default 40:60 front-to-rear split, ensuring optimal traction and stability in various driving conditions.

What is the maximum torque capacity of the BMW X6 drivetrain?

The maximum torque capacity of the BMW X6 drivetrain varies by engine option. For the X6 M50i, the drivetrain can handle up to 750 Nm (553 lb-ft) of torque, while the X6 xDrive40i supports up to 450 Nm (332 lb-ft). These values are engineered to match the performance of the respective powertrains.

How does the xDrive system improve handling in the BMW X6?

The xDrive system continuously monitors driving conditions and adjusts torque distribution between the front and rear axles in milliseconds. It works in conjunction with Dynamic Stability Control (DSC) to enhance cornering stability, reduce understeer, and improve overall handling, especially in adverse weather or high-performance driving scenarios.

Can the BMW X6 drivetrain be serviced independently?

No, the BMW X6 drivetrain, including the xDrive system, requires specialized tools and expertise for servicing. It is recommended to have any drivetrain-related maintenance or repairs performed by a certified BMW technician to ensure proper functionality and avoid voiding the vehicle's warranty.

What is the recommended service interval for the drivetrain components?

BMW recommends inspecting the drivetrain components, including the transfer case and differentials, every 30,000 miles or as specified in the vehicle's service schedule. Fluid changes for the transfer case and differentials are typically required every 60,000 miles, but this may vary based on driving conditions.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW xDrive System Overview

Coming Soon

Detailed technical guide explaining the functionality and benefits of the xDrive all-wheel-drive system in the BMW X6.

Drivetrain Maintenance Checklist

Coming Soon

A comprehensive checklist for maintaining the drivetrain components of the BMW X6, including fluid levels, seals, and torque specifications.

BMW X6 Drivetrain Warranty Information

Coming Soon

Official documentation outlining the warranty coverage for the drivetrain components of the 2022-Present BMW X6.

Performance Tuning for xDrive Systems

Coming Soon

Technical guide on optimizing the performance of the xDrive system for enhanced handling and traction in the BMW X6.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.