BMW X6 2022-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2022-Present BMW X6. Includes performance data, system overviews, and maintenance tips.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2022-Present BMW X6, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'fuel system'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Horsepower
335 hp @ 5500-6500 rpm
Torque
331 lb-ft @ 1500-5200 rpm
Displacement
2998 cc
Fuel Efficiency
23 MPG (combined)
Oil Capacity
6.5 liters
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum horsepower: 335 hp @ 5500-6500 rpm
- Peak torque: 331 lb-ft @ 1500-5200 rpm
- Compression ratio: 11.0:1
- Redline: 7000 rpm
Acceleration
- 0-60 mph: 5.3 seconds
- Top speed: 155 mph (electronically limited)
- Quarter-mile time: 13.8 seconds
- Note: Performance figures may vary based on driving conditions and vehicle configuration
Note: Performance figures are based on ideal conditions and may vary in real-world scenarios.
Fuel System
Technical details about the fuel system, including injection type, fuel efficiency, and emissions.
Fuel System
Technical details about the fuel system, including injection type, fuel efficiency, and emissions.
Fuel Injection
- Direct fuel injection system
- High-pressure fuel pump: 200 bar
- Fuel tank capacity: 21.9 gallons
- Fuel type: Premium unleaded (91 octane or higher)
Fuel Efficiency
- City MPG: 21
- Highway MPG: 26
- Combined MPG: 23
- CO2 emissions: 235 g/km
Note: Fuel efficiency and emissions are measured under standardized testing conditions.
Engine Construction
Details about the engine's construction, materials, and key components.
Engine Construction
Details about the engine's construction, materials, and key components.
Block and Cylinders
- Engine block material: Aluminum
- Cylinder configuration: Inline 6
- Bore x Stroke: 84.0 mm x 90.0 mm
- Displacement: 2998 cc
Valvetrain
- Valvetrain type: DOHC (Dual Overhead Camshaft)
- Number of valves: 24
- Variable valve timing: Double-VANOS
- Valve lift system: Valvetronic
Note: The Valvetronic system allows for precise control of valve lift, improving efficiency and performance.
Cooling and Lubrication
Information on the engine's cooling and lubrication systems, including oil capacity and cooling mechanisms.
Cooling and Lubrication
Information on the engine's cooling and lubrication systems, including oil capacity and cooling mechanisms.
Cooling System
- Coolant capacity: 12.5 liters
- Radiator type: Cross-flow
- Thermostat: Electronically controlled
- Coolant type: BMW-approved antifreeze
Lubrication System
- Oil capacity: 6.5 liters
- Oil type: BMW TwinPower Turbo LL-01 FE 0W-30
- Oil change interval: 10,000 miles or 12 months
- Oil filter type: Cartridge-style
Note: Always use BMW-approved oil and filters to ensure optimal engine performance and longevity.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30M2
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Part Number
- 11002460123
Performance
- Max Power
- 382 hp @ 5800-6500 rpm
- Max Torque
- 369 lb-ft @ 1800-5000 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph
- 4.9 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13538616079
- Fuel Filter Part Number
- 13327707222
- Emission Standard
- EU6d, ULEV50
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586961
- Water Pump Type
- Electric
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20
- Oil Filter Part Number
- 11427837929
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK SILZKBR8D8S
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138657253
- Ignition Timing
- Fully electronic, variable
Turbocharger
- Type
- Twin-scroll turbocharger
- Boost Pressure
- 1.2 bar
- Turbo Part Number
- 11657848976
- Wastegate Control
- Electronic
- intercooler Type
- Air-to-air
Valvetrain
- Valve Configuration
- DOHC, 4 valves per cylinder
- Valve Material
- Hollow-stem intake, sodium-filled exhaust
- Camshaft Part Number
- 11367609999
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain Type
- Dual-row, maintenance-free
Engine Management
- Ecu Type
- Bosch MEVD17.2
- Software Version
- V1.23.4
- Sensor References
-
- Crankshaft position sensor: 12147596123
- Camshaft position sensor: 12147848765
- Knock sensor: 12147848766
- Diagnostic interface
- OBD-II, CAN bus
Maintenance
- Spark Plug Replacement
- 60000 miles
- Timing Chain Inspection
- 100000 miles
- Coolant Replacement
- 4 years or 50000 miles
- Air Filter Replacement
- 30000 miles
- Belt Replacement
- 90000 miles
Diagnostics
- Common Fault Codes
-
- P0300 - Random/Multiple Cylinder Misfire Detected
- P0171 - System Too Lean (Bank 1)
- P0299 - Turbocharger Underboost
- Diagnostic Tools
-
- BMW ISTA+
- Autologic
- Launch X431
- Sensor Tolerances
- Oxygen Sensor: ±0.1 VMaf Sensor: ±2%Map Sensor: ±1 kPa
Service Information Service
Detailed service requirements and schedules for the 3.0l-engine
- Oil and filter change
- Inspect fluid levels
- Check for leaks
- Inspect belts and hoses
Use only BMW-approved fluids and parts
- Replace air filter
- Inspect spark plugs
- Check ignition system
- Inspect fuel system
Replace spark plugs if necessary
- Replace spark plugs
- Inspect timing chain
- Replace coolant
- Inspect turbocharger system
Timing chain inspection is critical for long-term reliability
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0l-engine in the 2022-Present BMW X6?
What is the horsepower and torque output of the 3.0l-engine in the 2022-Present BMW X6?
The 3.0l inline-6 turbocharged engine in the 2022-Present BMW X6 produces 335 horsepower at 5,500-6,500 rpm and 331 lb-ft of torque at 1,500-5,200 rpm. This engine is part of the B58 engine family, known for its efficiency and performance.
Q2 What type of fuel system does the 3.0l-engine use?
What type of fuel system does the 3.0l-engine use?
The 3.0l-engine utilizes a high-precision direct injection fuel system. This system optimizes fuel delivery for improved combustion efficiency, reducing emissions and enhancing performance. The fuel pressure is maintained at up to 200 bar (2,900 psi) for precise atomization.
Q3 What is the recommended oil type and capacity for the 3.0l-engine?
What is the recommended oil type and capacity for the 3.0l-engine?
The 3.0l-engine requires BMW-approved synthetic oil with a viscosity of SAE 0W-20 or 5W-30, depending on climate conditions. The oil capacity is approximately 6.5 liters (6.9 quarts). Always refer to the owner's manual or BMW's official service documentation for specific recommendations.
Q4 What is the engine displacement and compression ratio of the 3.0l-engine?
What is the engine displacement and compression ratio of the 3.0l-engine?
The 3.0l-engine has a displacement of 2,998 cc (cubic centimeters) and a compression ratio of 11.0:1. This high compression ratio contributes to the engine's efficiency and power output.
Q5 Does the 3.0l-engine feature any advanced technologies?
Does the 3.0l-engine feature any advanced technologies?
Yes, the 3.0l-engine incorporates BMW's TwinPower Turbo technology, VALVETRONIC variable valve timing, and Double-VANOS camshaft adjustment. These technologies enhance throttle response, fuel efficiency, and overall performance.
Q6 What is the service interval for the 3.0l-engine?
What is the service interval for the 3.0l-engine?
The recommended service interval for the 3.0l-engine is every 10,000 miles or 12 months, whichever comes first. This includes oil changes, filter replacements, and inspections of critical components. Always follow the Condition Based Service (CBS) system in the vehicle for precise maintenance scheduling.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 3.0l B58 Engine Technical Overview
Coming SoonA detailed technical guide covering the design, specifications, and features of the B58 3.0l inline-6 engine used in the BMW X6.
BMW X6 Owner's Manual
Coming SoonThe official owner's manual for the 2022-Present BMW X6, including maintenance schedules, engine specifications, and safety information.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0l-engine, ensuring optimal performance and warranty compliance.
BMW Service and Repair Procedures
Coming SoonStep-by-step service and repair guides for the 3.0l-engine, including torque specifications, diagnostic procedures, and safety precautions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.