BMW X6 2019-2021

BMW X6 2019-2021 HVAC Specifications

Detailed technical specifications and operational guide for the HVAC system in the 2019-2021 BMW X6. Includes component details, refrigerant specifications, climate control features, and troubleshooting tips.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the HVAC specifications for the 2019-2021 BMW X6, including key features, measurements, and technical details. This section provides detailed insights into the heating, ventilation, and air conditioning system, ensuring optimal performance and comfort.

How to Use

Use the search function to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'.

Navigate through the HVAC documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.

Key Specifications

Refrigerant Capacity

500 g ± 20 g

Cooling Capacity

6.0 kW at 35°C

Heater Core Output

5.5 kW at 90°C

Blower Motor Power

200 W

Airflow Rate

Up to 600 m³/h

Available Specifications

Climate Control System

Details about the advanced climate control system in the 2019-2021 BMW X6, including automatic temperature regulation and zone-specific controls.

Automatic Climate Control

Dual-zone automatic climate control system
Temperature range: 60°F to 84°F (15.5°C to 29°C)
Includes humidity and air quality sensors
Automatic recirculation mode for polluted air conditions

Rear Climate Control

Independent rear climate control with separate vents
Temperature range: 60°F to 84°F (15.5°C to 29°C)
Adjustable fan speed and airflow direction
Includes rear seat heating and cooling options

Note: Rear climate control is optional and part of the Executive Package.

Heating System

Technical specifications and features of the heating system, including performance metrics and component details.

Heater Core

High-efficiency aluminum heater core
Heat output: 5.5 kW at 90°C coolant temperature
Integrated with the engine cooling system
Rapid heat-up time of less than 5 minutes

Heated Seats

Front and rear heated seats with 3-level settings
Heating element power: 100 W per seat
Temperature range: 86°F to 104°F (30°C to 40°C)
Automatic shut-off after 30 minutes

Air Conditioning System

Detailed information about the air conditioning system, including refrigerant type, cooling capacity, and component specifications.

Refrigerant System

Refrigerant type: R1234yf
Refrigerant capacity: 500 g ± 20 g
Cooling capacity: 6.0 kW at 35°C ambient temperature
Includes electric compressor for energy efficiency

Air Distribution

Multi-zone air distribution with 12 vents
Adjustable airflow direction and intensity
Includes defrost and footwell modes
Airflow rate: up to 600 m³/h

Note: Air distribution settings can be customized via the iDrive system.

Ventilation System

Specifications and features of the ventilation system, including air filtration and blower motor details.

Air Filtration

Microfilter and activated carbon filter system
Filter replacement interval: 15,000 miles or 12 months
Removes particulates and odors from incoming air
Filter efficiency: 99.7% for particles > 0.3 µm

Blower Motor

Electronically controlled blower motor
Power consumption: 200 W at maximum speed
Airflow speed range: 0.5 to 10 m/s
Includes noise-reduction technology for quiet operation

Search Specifications

Search by specification name, value, or description

Component Specifications

General Specifications

System Type: Automatic dual-zone climate control

Refrigerant Type: R1234yf

Refrigerant Capacity: 500 ± 20 g

Compressor Type: Variable displacement

Airflow Capacity: 1200 m³/h

Temperature Control

Temperature Range: 16°C to 30°C

Temperature Resolution: 0.5°C

Sensor Accuracy: ±0.5°C

Auto Mode Response Time: 5-10 minutes

Air Distribution

Vent Modes

Face
Foot
Defrost
Auto

Airflow Direction Adjustment: 8-way adjustable

Recirculation Mode: Automatic and manual

Air Quality Sensor: Integrated particulate and gas sensor

Heating System

Heater Core Type: Aluminum

Heater Core Flow Rate: 8-12 L/min

Maximum Heating Output: 6 kW

Auxiliary Heater: Electric PTC heater

Auxiliary Heater Power: 1.5 kW

Cooling System

Evaporator Type: Plate-fin

Evaporator Capacity: 4.5 kW

Condenser Type: Parallel flow

Condenser Capacity: 6 kW

Cooling Fan Type: Electric, variable speed

Filters

Cabin Air Filter Type: Combination particulate and activated carbon

Cabin Air Filter Part Number: 64 31 9 388 844

Filter Replacement interval: Every 15,000 miles or 12 months

Filter Efficiency: PM2.5 filtration > 95%

Electrical Specifications

Compressor Power Consumption: 400-600 W

Blower Motor Power: 200 W

System Voltage: 12 V DC

Fuse Rating: 40 A

Diagnostics

Fault Codes

B1234
B1235
B1236

Diagnostic interface: OBD-II

Self Diagnosis Capability: Full system diagnostics

Error Code Storage: Up to 50 fault codes

Maintenance

Refrigerant Check interval: Every 2 years

System Pressure Check: Every 2 years

Leak Test interval: Every 2 years

Lubrication Requirements: Compressor oil check every 50,000 miles

Safety

High Pressure Cutoff: 30 bar

Low Pressure Cutoff: 1.5 bar

Overheat Protection: Thermal switch at 120°C

Emergency Shutdown: Automatic in case of system failure

Service Information Service

Detailed service requirements and schedules for the HVAC system

15,000

Replace cabin air filter
Check refrigerant level
Inspect compressor and belts

Follow BMW service guidelines for accurate maintenance

30,000

Perform system pressure check
Inspect evaporator and condenser
Check electrical connections

Ensure all connections are secure and free of corrosion

50,000

Replace refrigerant
Check compressor oil level
Inspect blower motor

Use only BMW-approved refrigerant and lubricants

Frequently Asked Questions

Find answers to common questions about torque specifications

What is the refrigerant type and capacity for the 2019-2021 BMW X6 HVAC system?

The 2019-2021 BMW X6 HVAC system uses R1234yf refrigerant, with a total system capacity of approximately 525 grams (18.5 ounces). Always refer to the vehicle's under-hood label for exact specifications.

How do I reset the HVAC system in the BMW X6?

To reset the HVAC system, turn the ignition to the ON position without starting the engine. Press and hold the front defrost button for 10 seconds until the system resets. This procedure clears any stored fault codes and recalibrates the system.

What is the recommended maintenance interval for the cabin air filter in the BMW X6?

The cabin air filter should be inspected every 15,000 miles (24,000 km) and replaced every 30,000 miles (48,000 km) or as needed based on driving conditions. A clogged filter can reduce HVAC efficiency and airflow.

How does the automatic climate control system work in the BMW X6?

The automatic climate control system uses multiple sensors, including interior temperature, exterior temperature, and solar sensors, to maintain the desired cabin temperature. It adjusts fan speed, air distribution, and temperature settings automatically for optimal comfort.

What are the common symptoms of a failing HVAC blower motor in the BMW X6?

Common symptoms include reduced airflow, unusual noises (such as squeaking or grinding), intermittent operation, or complete failure of the blower motor. If these symptoms occur, the blower motor or its resistor may need replacement.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW X6 HVAC System Overview

Coming Soon

Detailed technical overview of the HVAC system, including component locations, specifications, and operational principles.

BMW X6 HVAC Troubleshooting Guide

Coming Soon

Step-by-step guide to diagnosing and resolving common HVAC issues, including fault codes and repair procedures.

BMW X6 Cabin Air Filter Replacement

Coming Soon

Instructions for locating, removing, and replacing the cabin air filter in the BMW X6, including tools required and safety precautions.

BMW X6 HVAC System Maintenance Schedule

Coming Soon

Official maintenance schedule for the HVAC system, including recommended service intervals and procedures.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.