BMW X5 2019-present HVAC Specifications
Detailed technical specifications and performance data for the HVAC system in the 2019-Present BMW X5 (G05). Includes system components, refrigerant details, control mechanisms, and diagnostic procedures.
Overview Specifications
Comprehensive description of the HVAC specifications for the 2019-Present BMW X5, including key features, measurements, and technical details. This section provides detailed insights into the heating, ventilation, and air conditioning system, ensuring optimal performance and comfort.
How to Use
Use the search function to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'.
Navigate through the HVAC documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.
Key Specifications
Refrigerant Capacity
500 grams
Cooling Capacity
6.5 kW
Heater Output
5.5 kW
Airflow Capacity
600 CFM
Filter Efficiency
99% for PM2.5
Available Specifications
Climate Control System
Details about the advanced climate control system in the 2019-Present BMW X5, including automatic temperature regulation and zone-specific controls.
Climate Control System
Details about the advanced climate control system in the 2019-Present BMW X5, including automatic temperature regulation and zone-specific controls.
Automatic Temperature Control
- Dual-zone automatic climate control as standard
- Temperature range: 60°F to 84°F (15.5°C to 29°C)
- Precision control with 0.5°F (0.3°C) increments
- Integrated humidity sensor for optimal comfort
Air Distribution System
- Four-zone climate control available as an option
- Adjustable air vents with 12-speed blower motor
- Airflow capacity: 500 CFM (cubic feet per minute)
- Automatic air recirculation mode for improved air quality
Note: The four-zone climate control system allows individual temperature settings for the driver, front passenger, and rear passengers.
Heating System
Technical specifications and features of the heating system, including the heater core and auxiliary heating components.
Heating System
Technical specifications and features of the heating system, including the heater core and auxiliary heating components.
Heater Core Specifications
- Heater core material: Aluminum
- Heat output: 5.5 kW at 90°C coolant temperature
- Coolant flow rate: 12 liters per minute
- Integrated electric heating element for rapid warm-up
Auxiliary Heating
- Optional auxiliary heater with 2 kW output
- Remote activation via BMW ConnectedDrive app
- Heating time to reach 20°C: 10 minutes
- Fuel consumption: 0.2 liters per hour
Note: The auxiliary heater is particularly useful in cold climates for pre-warming the cabin.
Air Conditioning System
Detailed information about the air conditioning system, including refrigerant type, compressor specifications, and cooling performance.
Air Conditioning System
Detailed information about the air conditioning system, including refrigerant type, compressor specifications, and cooling performance.
Refrigerant and Compressor
- Refrigerant type: R1234yf (environmentally friendly)
- Refrigerant capacity: 500 grams
- Compressor type: Variable displacement
- Cooling capacity: 6.5 kW at 35°C ambient temperature
Cooling Performance
- Cabin cooling time to 22°C: 5 minutes at 35°C ambient
- Maximum airflow: 600 CFM in cooling mode
- Energy-efficient ECO PRO mode reduces compressor load
- Automatic dehumidification in cooling mode
Note: The ECO PRO mode optimizes energy usage by reducing the compressor's workload during low-demand conditions.
Air Quality and Filtration
Features and specifications of the air filtration system, including particulate filters and air quality sensors.
Air Quality and Filtration
Features and specifications of the air filtration system, including particulate filters and air quality sensors.
Air Filtration System
- Standard microfilter with activated carbon layer
- Optional enhanced air filter with PM2.5 filtration
- Filter replacement interval: 15,000 miles or 12 months
- Filter efficiency: 99% for particles larger than 0.3 microns
Air Quality Sensors
- Integrated air quality sensor detects pollutants
- Automatic air recirculation in high-pollution areas
- Sensor response time: < 1 second
- Compatible with BMW ConnectedDrive for real-time air quality updates
Note: The air quality sensor ensures a healthier cabin environment by automatically switching to recirculation mode when pollutants are detected.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
General Specifications
- System Type
- Automatic Dual-Zone Climate Control
- Refrigerant Type
- R1234yf
- Refrigerant Capacity
- 500 ± 20 g
- Compressor Type
- Variable Displacement
- Blower Motor Power
- 200 W
- Airflow Capacity
- 1500 m³/h
Temperature Control
- Temperature Range
- 16°C to 30°C
- Temperature Resolution
- 0.5°C
- Sensor Accuracy
- ±0.5°C
- Auto Mode Response Time
- 5-10 minutes
Air Distribution
- Vent Types
-
- Face
- Foot
- Defrost
- Combination
- Vent Material
- ABS Plastic
- Vent Actuator Type
- Stepper Motor
- Vent Actuator Torque
- 0.5 Nm
Filtration System
- Filter Type
- Cabin Microfilter with Activated Carbon
- Filter Part Number
- 64 31 9 388 844
- Filter Efficiency
- PM2.5 > 95%
- Filter Replacement interval
- 15,000 miles or 12 months
Heating System
- Heater Core Material
- Aluminum
- Heater Core Capacity
- 5 kW
- Coolant Flow Rate
- 10 L/min
- Coolant Temperature Range
- 80°C to 105°C
Cooling System
- Evaporator Material
- Aluminum
- Evaporator Capacity
- 3.5 kW
- Condenser Material
- Aluminum
- Condenser Capacity
- 4 kW
- Compressor Oil Type
- PAG 46
- Compressor Oil Capacity
- 120 ± 10 ml
Electrical Specifications
- System Voltage
- 12 V DC
- Blower Motor Current
- 16.7 A
- Compressor Clutch Current
- 3.5 A
- Control Module Part Number
- 64 11 9 388 123
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Code Storage
- Up to 20 codes
- Self Diagnosis interval
- Every ignition cycle
- Diagnostic Tool Compatibility
-
- BMW ISTA
- Generic OBD-II Scanners
Operational Limits
- Ambient Temperature Range
- -30°C to 50°C
- Maximum Humidity
- 95% RH
- Minimum Compressor Speed
- 800 rpm
- Maximum Compressor Speed
- 6000 rpm
Safety Features
- High Pressure Cutoff
- 30 bar
- Low Pressure Cutoff
- 1.5 bar
- Overheat Protection
- 110°C
- Short Circuit Protection
- Integrated in control module
Service Information Service
Detailed service requirements and schedules for the HVAC system
- Replace cabin microfilter
- Inspect refrigerant level
- Check compressor operation
- Inspect blower motor and vents
Follow BMW-recommended procedures for refrigerant handling
- Inspect and clean evaporator and condenser
- Check electrical connections
- Test HVAC control module functionality
Use BMW-approved diagnostic tools for module testing
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the refrigerant type and capacity for the 2019-Present BMW X5 HVAC system?
What is the refrigerant type and capacity for the 2019-Present BMW X5 HVAC system?
The 2019-Present BMW X5 HVAC system uses R1234yf refrigerant. The total system capacity is approximately 500-550 grams, depending on the specific model and trim. Always refer to the vehicle's service manual for exact specifications.
Q2 How do I reset the HVAC system in the BMW X5?
How do I reset the HVAC system in the BMW X5?
To reset the HVAC system, turn the ignition to the ON position without starting the engine. Set the temperature to the highest setting and press the MAX A/C button for 10 seconds. The system will reset, and the display will confirm the process. This procedure is specific to the 2019-Present BMW X5.
Q3 What is the recommended maintenance interval for the HVAC cabin air filter?
What is the recommended maintenance interval for the HVAC cabin air filter?
The cabin air filter in the 2019-Present BMW X5 should be inspected every 15,000 miles and replaced every 30,000 miles or as needed based on driving conditions. A clogged filter can reduce HVAC efficiency and air quality.
Q4 How does the automatic climate control system work in the BMW X5?
How does the automatic climate control system work in the BMW X5?
The automatic climate control system in the 2019-Present BMW X5 uses multiple sensors to monitor cabin temperature, humidity, and sunlight. It adjusts fan speed, air distribution, and temperature automatically to maintain the desired comfort level. The system also includes a microfilter to improve air quality.
Q5 What is the maximum cooling capacity of the BMW X5 HVAC system?
What is the maximum cooling capacity of the BMW X5 HVAC system?
The 2019-Present BMW X5 HVAC system has a maximum cooling capacity of approximately 5-6 kW, depending on ambient conditions and system load. This ensures efficient cooling even in extreme temperatures.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X5 HVAC System Service Manual
Coming SoonOfficial service manual for the 2019-Present BMW X5 HVAC system, including detailed repair and maintenance procedures.
HVAC Refrigerant Handling Guide
Coming SoonComprehensive guide on handling R1234yf refrigerant, including safety precautions and proper charging procedures.
Cabin Air Filter Replacement Tutorial
Coming SoonStep-by-step video tutorial for replacing the cabin air filter in the 2019-Present BMW X5.
Automatic Climate Control Diagnostics
Coming SoonDiagnostic procedures for troubleshooting the automatic climate control system in the BMW X5.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.