BMW X5 2019-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L turbocharged inline-6 engine in the 2019-Present BMW X5. Includes performance data, maintenance guidelines, and system-specific details.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2019-Present BMW X5, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'fuel system'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
3.0 liters (2998 cc)
Horsepower
335 hp (250 kW)
Torque
330 lb-ft (447 Nm)
Fuel Efficiency
21 mpg city / 26 mpg highway
Oil Capacity
6.5 liters (6.9 quarts)
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power and Torque
- Maximum power output: 335 hp (250 kW) at 5500-6500 rpm
- Peak torque: 330 lb-ft (447 Nm) at 1500-5200 rpm
- Compression ratio: 11.0:1
- Direct injection fuel system with high-pressure injectors
Acceleration and Top Speed
- 0-60 mph acceleration: 5.3 seconds
- Top speed: 130 mph (electronically limited)
- Engine redline: 7000 rpm
- Turbocharged inline-6 configuration
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design and Construction
Technical details on the design, materials, and construction of the 3.0l-engine.
Engine Design and Construction
Technical details on the design, materials, and construction of the 3.0l-engine.
Engine Block and Components
- Aluminum engine block with magnesium alloy cylinder head
- Double VANOS variable valve timing
- Valvetronic fully variable valve lift system
- Forged steel crankshaft for enhanced durability
Cooling and Lubrication
- Water-cooled intercooler for turbocharged air
- Electric coolant pump for efficient thermal management
- Dry-sump lubrication system with dual oil pumps
- Oil capacity: 6.5 liters (6.9 quarts)
Note: Regular oil changes are recommended every 10,000 miles or 12 months, whichever comes first.
Fuel and Emissions
Information on the fuel system, efficiency, and emissions compliance of the 3.0l-engine.
Fuel and Emissions
Information on the fuel system, efficiency, and emissions compliance of the 3.0l-engine.
Fuel System
- Direct injection with Bosch high-pressure fuel pump
- Fuel tank capacity: 21.9 gallons (83 liters)
- Fuel efficiency: 21 mpg city / 26 mpg highway
- Euro 6d-TEMP emissions compliance
Emissions Control
- Dual catalytic converters with close-coupled design
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced emissions
- Start-stop technology for improved fuel economy
Note: The particulate filter requires periodic regeneration, which occurs automatically during driving.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure optimal performance and longevity.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure optimal performance and longevity.
Service Intervals
- Oil change interval: 10,000 miles or 12 months
- Spark plug replacement: 60,000 miles
- Air filter replacement: 30,000 miles
- Timing chain inspection: 100,000 miles
Diagnostics and Troubleshooting
- Integrated OBD-II diagnostics system
- Real-time engine monitoring via iDrive system
- Common fault codes include P0171 (system too lean) and P0300 (random misfire)
- Use BMW ISTA software for advanced diagnostics
Note: Always use genuine BMW parts and fluids for maintenance to ensure compatibility and performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30M1
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2019-Present
Performance
- Horsepower
- 335 hp @ 5500-6500 rpm
- Torque
- 330 lb-ft @ 1500-5200 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Top Speed
- 155 mph (electronically limited)
Dimensions And Weight
- Engine Length
- 22.8 in
- Engine Width
- 28.3 in
- Engine Height
- 24.4 in
- Dry Weight
- 403 lbs
- Oil Capacity
- 6.5 quarts
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 2900 psi
- Fuel Filter Part Number
- 13-42-8-617-123
- Fuel Pump Part Number
- 16-14-7-581-456
Ignition System
- Spark Plug Type
- Bosch ZR5TPP332
- Spark Plug Gap
- 0.028 in
- Ignition Coil Part Number
- 12-13-7-581-234
- Ignition Timing
- Fully electronic, variable
Cooling System
- Coolant Capacity
- 12.7 quarts
- Thermostat Opening Temperature
- 194°F
- Radiator Part Number
- 17-11-7-581-345
- Water Pump Part Number
- 11-51-7-581-678
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30 or equivalent
- Oil Filter Part Number
- 11-42-7-581-234
- Oil Pressure
- 43-58 psi @ 2000 rpm
- Oil Change interval
- 10,000 miles or 12 months
Emissions
- Emission Standard
- EU6, LEV3
- Catalytic Converter Part Number
- 18-30-7-581-456
- Oxygen Sensor Part Number
- 11-78-7-581-789
- EGR System
- Integrated into turbocharger
Maintenance
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Lifetime maintenance-free
- Belt Drive
- Serpentine belt, replace every 60,000 miles
- Air Filter Part Number
- 13-71-7-581-123
- Cabin Filter Part Number
- 64-31-9-319-456
Diagnostics
- OBDII Port Location
- Under dashboard, driver's side
- Diagnostic Codes
-
- P0171
- P0300
- P0420
- Scan Tool Compatibility
- BMW ISTA, INPA, or compatible OBDII scanners
- Common Issues
-
- High-pressure fuel pump failure
- Valve cover gasket leaks
- Coolant system leaks
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect tires and adjust pressure
Use only BMW-approved fluids and parts
- Replace air filter
- Replace cabin filter
- Inspect spark plugs
- Check drive belts
Replace spark plugs if necessary
- Replace serpentine belt
- Inspect fuel system
- Check engine mounts
- Inspect exhaust system
Perform thorough engine diagnostics
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2019-Present BMW X5?
What is the horsepower and torque output of the 3.0L engine in the 2019-Present BMW X5?
The 3.0L turbocharged inline-6 engine in the 2019-Present BMW X5 produces 335 horsepower at 5,500-6,500 rpm and 330 lb-ft of torque at 1,500-5,200 rpm. This engine is part of the B58 engine family and features TwinPower Turbo technology.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine in the BMW X5 utilizes a direct fuel injection system, which precisely delivers fuel into the combustion chamber at high pressure for improved efficiency and performance. It is compatible with premium unleaded gasoline (91 octane or higher).
Q3 What is the oil capacity and recommended oil type for the 3.0L engine?
What is the oil capacity and recommended oil type for the 3.0L engine?
The 3.0L engine requires approximately 6.9 quarts (6.5 liters) of engine oil. BMW recommends using synthetic oil meeting the LL-01 or LL-17 FE+ specification, with a viscosity of 0W-20 or 5W-30, depending on climate and driving conditions.
Q4 What is the recommended service interval for the 3.0L engine?
What is the recommended service interval for the 3.0L engine?
BMW recommends an oil change and inspection service every 10,000 miles or 12 months, whichever comes first. Additional services, such as spark plug replacement, are recommended every 60,000 miles. Always refer to the vehicle's Condition Based Service (CBS) system for precise intervals.
Q5 Does the 3.0L engine require any specific cooling system maintenance?
Does the 3.0L engine require any specific cooling system maintenance?
The 3.0L engine features a liquid cooling system with an electric water pump. It is recommended to inspect the coolant level and condition every 30,000 miles and replace the coolant every 60,000 miles. Use only BMW-approved coolant (G48 specification) to avoid damage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X5 3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 3.0L engine, including performance data, dimensions, and component details.
BMW X5 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2019-Present BMW X5, including service intervals and recommended procedures.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other systems.
BMW X5 Owner's Manual
Coming SoonDownload the official owner's manual for the 2019-Present BMW X5, including detailed operating and maintenance instructions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.