BMW X5 2007-2013

BMW X5 2007-2013 4.8l-engine Specifications

Detailed technical specifications and service documentation for the 4.8L N62B48 engine in the 2007-2013 BMW X5. Covers engine performance, maintenance, and repair procedures.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the 4.8l-engine specifications for the 2007-2013 BMW X5, including key features, measurements, and technical details

How to Use

Use the search function to locate specific 4.8l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Displacement

4.8 liters (4799 cc)

Horsepower

350 hp @ 6300 rpm

Torque

350 lb-ft @ 3400 rpm

Compression Ratio

10.5:1

Oil Capacity

8.5 liters

Available Specifications

Engine Performance

Detailed information on the performance characteristics of the 4.8l-engine, including power output, torque, and fuel efficiency

Power Output

Maximum horsepower: 350 hp @ 6300 rpm
Maximum torque: 350 lb-ft @ 3400 rpm
Redline: 6500 rpm
Compression ratio: 10.5:1
Fuel type: Premium unleaded (91 octane or higher)

Fuel Efficiency

City fuel economy: 13 mpg
Highway fuel economy: 18 mpg
Combined fuel economy: 15 mpg
Fuel tank capacity: 22.5 gallons

Note: Fuel efficiency may vary based on driving conditions and vehicle load.

Engine Design

Technical details on the design and construction of the 4.8l-engine, including materials, layout, and cooling system

Engine Layout

Configuration: V8
Displacement: 4.8 liters (4799 cc)
Bore: 93 mm
Stroke: 88.3 mm
Cylinder head material: Aluminum

Cooling System

Coolant capacity: 12.7 liters
Thermostat opening temperature: 97°C
Radiator type: Cross-flow
Coolant type: BMW-approved antifreeze

Note: Ensure proper coolant mixture to prevent overheating and corrosion.

Engine Management

Information on the engine control systems, including ECU, sensors, and emissions compliance

Engine Control Unit (ECU)

ECU type: Bosch ME9.2
Ignition system: Coil-on-plug
Fuel injection: Direct injection
Throttle control: Electronic throttle control (ETC)

Emissions Compliance

Emissions standard: Euro 4 / ULEV II
Catalytic converter: Dual-stage
Oxygen sensors: 4 (2 upstream, 2 downstream)
Exhaust gas recirculation (EGR): Yes

Note: Regular maintenance is required to maintain emissions compliance.

Maintenance Specifications

Guidelines for maintaining the 4.8l-engine, including oil capacity, spark plug specifications, and service intervals

Oil Specifications

Oil capacity: 8.5 liters (with filter)
Recommended oil grade: SAE 5W-30
Oil change interval: 10,000 miles or 12 months
Oil filter type: Cartridge-style

Spark Plugs

Spark plug type: Iridium-tipped
Gap: 0.8 mm
Replacement interval: 60,000 miles
Torque specification: 25 Nm

Note: Use only BMW-approved spark plugs for optimal performance.

Search Specifications

Search by specification name, value, or description

Engine Specifications

General

Engine Code: N62B48

Displacement: 4.8 liters

Configuration: V8

Cylinder Bore: 93.0 mm

Piston Stroke: 88.3 mm

Compression Ratio: 10.5:1

Fuel System: Direct injection

Fuel Type: Premium unleaded (91 octane or higher)

Performance

Max Power: 355 hp @ 6300 rpm

Max Torque: 360 lb-ft @ 3400 rpm

Redline: 6500 rpm

Acceleration 0 To 60: 6.4 seconds

Top Speed: 150 mph (electronically limited)

Dimensions And Weight

Engine Length: 650 mm

Engine Width: 750 mm

Engine Height: 680 mm

Dry Weight: 198 kg

Oil Capacity: 8.5 liters

Cooling System

Coolant Capacity: 12.5 liters

Thermostat Opening Temperature: 97°C

Radiator Core Dimensions: 700 mm x 450 mm x 32 mm

Coolant Type: BMW Antifreeze/Coolant (G48)

Lubrication System

Oil Type: BMW Longlife-01 5W-30

Oil Pressure: 3.5 bar @ 2000 rpm

Oil Filter Part Number: 11 42 7 566 327

Oil Change interval: 15000 miles or 12 months

Ignition System

Spark Plug Type: Bosch FR7NPP332

Spark Plug Gap: 0.8 mm

Ignition Coil Part Number: 12 13 7 566 327

Ignition Timing: 10° BTDC @ idle

Fuel System

Fuel Pump Pressure: 5.0 bar

injector Flow Rate: 220 cc/min

Fuel Filter Part Number: 13 32 7 566 327

Fuel Tank Capacity: 85 liters

Emissions

Emission Standard: EURO 4

Catalytic Converter Part Number: 18 30 7 566 327

Oxygen Sensor Part Number: 11 78 7 566 327

Exhaust System Backpressure: 0.3 bar @ 3000 rpm

Maintenance

Valve Clearance: Hydraulic, self-adjusting

Timing Chain Tensioner Part Number: 11 31 7 566 327

Belt Tensioner Part Number: 11 28 7 566 327

Service interval: 15000 miles or 12 months

Diagnostics

Onboard Diagnostic System: OBD-II

Diagnostic Connector Location: Under dashboard, driver's side

Common Fault Codes

P0171
P0174
P0300

Diagnostic Tool: BMW ISTA/D

Service Information Service

Detailed service requirements and schedules for the 4.8L engine

15000

Oil and filter change
Inspect and replace air filter if necessary
Check and top off all fluid levels
Inspect belts and hoses for wear

Use only BMW-approved fluids and parts

30000

Replace spark plugs
Inspect and replace fuel filter if necessary
Check and adjust valve clearance if necessary
Inspect cooling system for leaks

Valve clearance adjustment may require special tools

60000

Replace timing chain and tensioner
Inspect and replace water pump if necessary
Replace coolant
Inspect and replace oxygen sensors if necessary

Timing chain replacement is critical for engine longevity

Common Questions

Find answers to common questions about torque specifications

What is the horsepower and torque output of the 4.8L engine in the 2007-2013 BMW X5?

The 4.8L N62B48 engine produces 350 horsepower at 6,300 rpm and 350 lb-ft of torque at 3,400 rpm. This V8 engine features Double-VANOS variable valve timing and Valvetronic variable lift technology for optimized performance.

What is the recommended oil type and capacity for the 4.8L engine?

The 4.8L engine requires synthetic oil meeting BMW Longlife-01 specification. The oil capacity is approximately 8.5 liters (9 quarts) with filter replacement. Always use SAE 5W-30 or 5W-40 viscosity for optimal performance.

What is the service interval for the 4.8L engine's timing chain?

The timing chain in the 4.8L engine is designed to last the lifetime of the vehicle under normal operating conditions. However, regular inspections are recommended every 60,000 miles to check for wear or stretching, especially if unusual noises or performance issues arise.

How often should the coolant be replaced in the 4.8L engine?

BMW recommends replacing the coolant every 4 years or 60,000 miles, whichever comes first. Use only BMW-approved antifreeze and coolant mixtures (50:50 ratio) to prevent corrosion and ensure proper engine cooling.

What are common issues with the 4.8L engine in the BMW X5?

Common issues include valve stem seal wear leading to oil consumption, coolant leaks from the valley pan gasket, and VANOS solenoid failures. Regular maintenance and using genuine BMW parts can mitigate these problems.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW X5 4.8L Engine Technical Manual

Coming Soon

Official technical manual covering specifications, maintenance procedures, and troubleshooting for the 4.8L engine.

4.8L Engine Oil Change Guide

Coming Soon

Step-by-step guide for performing an oil change on the 4.8L engine, including recommended tools and safety precautions.

Cooling System Maintenance for 4.8L Engine

Coming Soon

Detailed instructions for inspecting and maintaining the cooling system, including coolant replacement and leak detection.

VANOS System Troubleshooting Guide

Coming Soon

Comprehensive guide to diagnosing and repairing VANOS system issues in the 4.8L engine.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.