BMW X5 2007-2013 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 engine in the 2007-2013 BMW X5. Includes performance metrics, maintenance guidelines, and component-specific details for the N52 and N55 engine variants.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2007-2013 BMW X5, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
3.0 liters (2996 cc)
Horsepower
260 hp @ 6600 rpm
Torque
225 lb-ft @ 2750 rpm
Compression Ratio
10.7:1
Oil Capacity
6.9 quarts (6.5 liters)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and fuel efficiency.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and fuel efficiency.
Power Output
- Maximum horsepower: 260 hp @ 6600 rpm
- Maximum torque: 225 lb-ft @ 2750 rpm
- Compression ratio: 10.7:1
- Fuel type: Premium unleaded gasoline
- Redline: 7000 rpm
Fuel Efficiency
- City fuel economy: 17 mpg
- Highway fuel economy: 24 mpg
- Combined fuel economy: 20 mpg
- Fuel tank capacity: 22.5 gallons
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Layout
- Inline 6-cylinder configuration
- Aluminum block and cylinder head
- DOHC (Double Overhead Camshaft) design
- Valvetrain: 4 valves per cylinder
- Bore x Stroke: 3.31 in x 3.54 in (84 mm x 90 mm)
Key Components
- Variable Valve Timing (VANOS)
- Direct fuel injection system
- Dual-mass flywheel
- Hydraulic lifters
Note: The VANOS system optimizes valve timing for improved performance and efficiency.
Cooling and Lubrication
Information on the cooling and lubrication systems of the 3.0l-engine, including specifications for coolant and oil.
Cooling and Lubrication
Information on the cooling and lubrication systems of the 3.0l-engine, including specifications for coolant and oil.
Cooling System
- Coolant capacity: 12.7 quarts (12 liters)
- Thermostat opening temperature: 194°F (90°C)
- Radiator type: Aluminum cross-flow
- Coolant type: BMW-approved antifreeze
Lubrication System
- Oil capacity: 6.9 quarts (6.5 liters)
- Oil type: BMW LL-01 approved synthetic oil
- Oil filter type: Cartridge-style
- Oil pressure: 43.5 psi (3 bar) at 2000 rpm
Note: Regular oil changes are recommended every 10,000 miles or 12 months.
Emissions and Exhaust
Details on the emissions control and exhaust system of the 3.0l-engine, including compliance and components.
Emissions and Exhaust
Details on the emissions control and exhaust system of the 3.0l-engine, including compliance and components.
Emissions Control
- Compliance: EPA Tier 2 Bin 5 emissions standards
- Catalytic converter: Three-way catalytic converter
- Exhaust gas recirculation (EGR) system
- Oxygen sensors: Dual pre-cat and post-cat sensors
Exhaust System
- Exhaust manifold: Cast iron
- Muffler: Stainless steel
- Tailpipe diameter: 2.5 inches
- Exhaust gas temperature sensor
Note: The exhaust system is designed to minimize backpressure and optimize engine performance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- N52B30
- Displacement
- 3.0 liters
- Configuration
- Inline 6-cylinder
- Aspiration
- Naturally aspirated
- Fuel Type
- Premium unleaded gasoline
- Manufacturer
- BMW
- Production Years
- 2007-2013
Performance Specifications
- Horsepower
- 260 hp @ 6600 rpm
- Torque
- 225 lb-ft @ 2750 rpm
- Redline
- 7000 rpm
- Compression Ratio
- 10.7:1
- Fuel System
- Direct injection
Dimensions And Weight
- Engine Length
- 24.8 inches
- Engine Width
- 27.6 inches
- Engine Height
- 23.6 inches
- Dry Weight
- 357 lbs
- Oil Capacity
- 6.9 quarts
Cooling System
- Coolant Capacity
- 10.6 quarts
- Thermostat Opening Temperature
- 97°C
- Radiator Cap Pressure
- 1.4 bar
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Type
- BMW Longlife-01 5W-30
- Oil Pressure
- 2.5-4.5 bar at 2000 rpm
- Oil Filter Part Number
- 11 42 7 566 327
- Oil Change interval
- 15000 miles or 12 months
Ignition System
- Spark Plug Type
- Bosch ZGR6STE2
- Spark Plug Gap
- 0.032 inches
- Ignition Coil Part Number
- 12 13 7 566 328
- Ignition Timing
- 10° BTDC at idle
Fuel System
- Fuel Pump Pressure
- 5.0 bar
- injector Flow Rate
- 200 cc/min
- Fuel Filter Part Number
- 13 32 7 566 329
- Fuel Tank Capacity
- 22.5 gallons
Emissions System
- Catalytic Converter Part Number
- 18 30 7 566 330
- Oxygen Sensor Part Number
- 11 78 7 566 331
- Euro Emission Standard
- EURO 4
- Evaporative Emissions System
- Yes
Maintenance Specifications
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain Tensioner
- Automatic hydraulic
- Belt Drive
- Serpentine belt with automatic tensioner
- Service interval
- 15000 miles or 12 months
Diagnostic Specifications
- Obd2 Port Location
- Under dashboard, driver's side
- Diagnostic Trouble Codes
- BMW-specific DTCs
- Scan Tool Compatibility
- BMW ISTA/D or compatible
- Emissions Test Requirements
- OBD-II readiness monitors
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Oil and filter change
- Inspect and replace air filter if necessary
- Check and top off all fluid levels
- Inspect belts and hoses for wear
Use only BMW-approved fluids and parts
- Replace spark plugs
- Inspect and replace fuel filter if necessary
- Check and adjust valve clearance if applicable
- Inspect cooling system for leaks
Valve clearance is self-adjusting on this engine
- Replace timing chain and guides
- Inspect and replace serpentine belt if necessary
- Flush and replace coolant
- Inspect and replace oxygen sensors if necessary
Timing chain replacement is recommended to prevent failure
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2007-2013 BMW X5?
What is the horsepower and torque output of the 3.0L engine in the 2007-2013 BMW X5?
The 3.0L N52/N53 inline-6 engine in the 2007-2013 BMW X5 produces 260 horsepower at 6,600 rpm and 225 lb-ft of torque at 2,750 rpm. The N53 variant, with direct injection, offers slightly improved efficiency and performance.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine uses a direct fuel injection system (N53 variant) or a multi-port fuel injection system (N52 variant). The N53 engine features High Precision Injection (HPI) for improved fuel efficiency and reduced emissions.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The recommended oil type is BMW-approved synthetic 5W-30 or 5W-40. The oil capacity is approximately 6.9 liters (7.3 quarts) with a filter change. Always refer to the owner's manual for specific recommendations.
Q4 What is the service interval for the 3.0L engine's timing chain?
What is the service interval for the 3.0L engine's timing chain?
The timing chain in the 3.0L engine is designed to last the lifetime of the engine under normal operating conditions. However, regular inspections are recommended, especially if unusual noises or performance issues arise.
Q5 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio of the 3.0L N52 engine is 10.7:1, while the N53 engine has a slightly higher compression ratio of 11:1 due to its direct injection system.
Q6 What are common issues to watch for in the 3.0L engine?
What are common issues to watch for in the 3.0L engine?
Common issues include valve cover gasket leaks, oil filter housing gasket leaks, and water pump failures. Regular maintenance and inspections can help mitigate these problems.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X5 3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 3.0L engine, including performance metrics, dimensions, and component details.
BMW X5 3.0L Maintenance Schedule
Coming SoonA comprehensive guide to the recommended maintenance schedule for the 3.0L engine, including oil changes, inspections, and part replacements.
BMW X5 3.0L Engine Repair Manual
Coming SoonStep-by-step repair procedures for common issues with the 3.0L engine, including torque specifications and safety precautions.
BMW X5 3.0L Engine Tuning Guide
Coming SoonA guide to performance tuning options for the 3.0L engine, including ECU remapping and aftermarket upgrades.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.