BMW X4 2018-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2018-Present BMW X4. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2018-Present BMW X4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
3.0 liters
Horsepower
382 hp
Torque
369 lb-ft
Compression Ratio
10.2:1
Fuel Tank Capacity
17.2 gallons
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power and Torque
- Maximum power output: 382 hp at 5,800-6,500 rpm
- Peak torque: 369 lb-ft at 1,800-5,000 rpm
- Compression ratio: 10.2:1
- Top speed: 155 mph (electronically limited)
- 0-60 mph acceleration: 4.6 seconds
Fuel Efficiency
- City fuel economy: 20 mpg
- Highway fuel economy: 27 mpg
- Combined fuel economy: 23 mpg
- Fuel type: Premium unleaded (91 octane or higher)
- Fuel tank capacity: 17.2 gallons
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Layout
- Inline 6-cylinder configuration
- Turbocharged with TwinPower Turbo technology
- Direct fuel injection system
- Aluminum alloy engine block and cylinder head
- Dual overhead camshafts (DOHC)
Cooling System
- Liquid-cooled with electric water pump
- Radiator size: 24.5 x 18.5 inches
- Coolant capacity: 12.7 quarts
- Thermostat opening temperature: 194°F (90°C)
- Coolant type: BMW-approved ethylene glycol-based coolant
Note: Regular coolant checks and replacements are recommended to maintain optimal engine performance.
Emissions and Compliance
Information on the 3.0l-engine's emissions standards, exhaust system, and environmental compliance.
Emissions and Compliance
Information on the 3.0l-engine's emissions standards, exhaust system, and environmental compliance.
Exhaust System
- Dual exhaust with chrome tips
- Catalytic converter: Close-coupled design
- Exhaust gas recirculation (EGR) system
- Particulate filter: Integrated into the exhaust system
- Exhaust pipe diameter: 2.5 inches
Emissions Standards
- Complies with Euro 6 and EPA Tier 3 emissions standards
- CO2 emissions: 213 g/km
- NOx emissions: 0.02 g/km
- Particulate matter emissions: 0.001 g/km
- On-board diagnostics (OBD) system for emissions monitoring
Note: Regular emissions system checks are required to ensure compliance with local regulations.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including recommended intervals and key procedures.
Service Intervals
- Oil change interval: Every 10,000 miles or 12 months
- Spark plug replacement: Every 60,000 miles
- Air filter replacement: Every 30,000 miles
- Fuel filter replacement: Every 50,000 miles
- Timing chain inspection: Every 100,000 miles
Recommended Fluids
- Engine oil: BMW TwinPower Turbo 5W-30 or equivalent
- Oil capacity: 6.5 quarts (with filter)
- Coolant: BMW-approved ethylene glycol-based coolant
- Transmission fluid: BMW Lifetime Fluid or equivalent
- Brake fluid: DOT 4
Note: Always use BMW-approved fluids to ensure optimal engine performance and longevity.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30M0
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline
- Manufacturer
- BMW AG
- Part Number
- 11002438319
Performance
- Max Power
- 382 hp @ 5800-6500 rpm
- Max Torque
- 369 lb-ft @ 1520-4800 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph
- 4.6 seconds
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13537596176
- Fuel Pump Part Number
- 16147393103
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temp
- 97°C
- Radiator Part Number
- 17117580101
- Water Pump Part Number
- 11518617809
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20
- Oil Filter Part Number
- 11427837969
- Oil Pump Part Number
- 11418617807
Ignition System
- Spark Plug Type
- NGK SILZKBR8D8S
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138616153
- Ignition Timing
- Adjustable via ECU
Emissions
- Emission Standard
- EU6
- Catalytic Converter Part Number
- 18307585201
- Oxygen Sensor Part Number
- 11787598025
- EGR System
- Integrated with turbocharger
Maintenance
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement
- 60000 miles
- Timing Chain
- Lifetime (no scheduled replacement)
- Air Filter Replacement
- 30000 miles
- Fuel Filter Replacement
- 60000 miles
Diagnostics
- OBD2 Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tool
- BMW ISTA+
- Sensor Cross References
- Crankshaft Position Sensor: 12147596173Camshaft Position Sensor: 12147596174
Safety
- Max Engine Temp
- 120°C
- Oil Pressure Warning
- Below 1.0 bar at idle
- Coolant Temp Warning
- Above 110°C
- Rev Limiter
- Enabled at 7000 rpm
Service Information Service
Detailed service requirements and schedules for the 3.0l-engine
- Oil and filter change
- Inspect cooling system
- Check engine air filter
Use only BMW-approved fluids and parts
- Replace engine air filter
- Inspect spark plugs
- Check fuel system
Perform diagnostic scan for fault codes
- Replace spark plugs
- Replace fuel filter
- Inspect timing chain
Timing chain inspection is critical for longevity
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2018-Present BMW X4?
What is the horsepower and torque output of the 3.0L engine in the 2018-Present BMW X4?
The 3.0L turbocharged inline-6 engine in the BMW X4 produces 382 horsepower at 5,800-6,500 rpm and 369 lb-ft of torque at 1,800-5,000 rpm, depending on the specific model and trim.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved performance and efficiency. It operates at a fuel pressure of approximately 200 bar (2,900 psi).
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The 3.0L engine requires synthetic oil meeting BMW Longlife-01 or LL-01 FE specifications. The oil capacity is approximately 6.5 liters (6.9 quarts), including the oil filter.
Q4 What is the engine displacement and compression ratio of the 3.0L engine?
What is the engine displacement and compression ratio of the 3.0L engine?
The engine has a displacement of 2,998 cc (3.0 liters) and a compression ratio of 10.2:1, which contributes to its balance of power and efficiency.
Q5 What is the recommended service interval for the 3.0L engine?
What is the recommended service interval for the 3.0L engine?
BMW recommends an oil change and general inspection every 10,000 miles or 12 months, whichever comes first. However, service intervals may vary based on driving conditions and vehicle usage.
Q6 Does the 3.0L engine feature any advanced technologies?
Does the 3.0L engine feature any advanced technologies?
Yes, the engine includes BMW TwinPower Turbo technology, VALVETRONIC variable valve timing, and Double-VANOS camshaft adjustment for enhanced performance and efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X4 3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications and performance data for the 3.0L engine in the BMW X4.
BMW X4 3.0L Engine Maintenance Guide
Coming SoonStep-by-step maintenance procedures and best practices for the 3.0L engine.
BMW X4 3.0L Engine Troubleshooting
Coming SoonCommon issues, diagnostic tips, and solutions for the 3.0L engine.
BMW X4 3.0L Engine Performance Upgrades
Coming SoonInformation on performance upgrades and tuning options for the 3.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.