BMW X4 2018-present 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine in the 2018-Present BMW X4. Includes performance data, system overviews, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2018-Present BMW X4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'fuel system'.
Navigate through the 2.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
2.0 liters (1998 cc)
Horsepower
248 hp (185 kW)
Torque
258 lb-ft (350 Nm)
Fuel Efficiency
24 mpg city / 31 mpg highway
Compression Ratio
10.2:1
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum power output: 248 hp (185 kW) at 5200-6500 rpm
- Peak torque: 258 lb-ft (350 Nm) at 1450-4800 rpm
- Compression ratio: 10.2:1
- Redline: 7000 rpm
Acceleration and Top Speed
- 0-60 mph acceleration: 6.0 seconds
- Top speed: 130 mph (electronically limited)
- Drag coefficient: 0.30 Cd
- Fuel efficiency: 24 mpg city / 31 mpg highway
Note: Performance figures may vary based on driving conditions and vehicle configuration.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and cooling systems.
Engine Layout
- Inline 4-cylinder configuration
- Turbocharged with TwinPower Turbo technology
- Aluminum engine block and cylinder head
- DOHC (Double Overhead Camshaft) design
Cooling System
- Liquid-cooled with electric water pump
- Thermostatically controlled cooling system
- Radiator size: 600 mm x 400 mm
- Coolant capacity: 7.5 liters
Note: The cooling system is designed for optimal thermal management under all driving conditions.
Fuel and Emissions
Information on the fuel system, injection technology, and emissions control for the 2.0l-engine.
Fuel and Emissions
Information on the fuel system, injection technology, and emissions control for the 2.0l-engine.
Fuel System
- Direct fuel injection with High Precision Injection
- Fuel tank capacity: 17.2 gallons (65 liters)
- Recommended fuel: Premium unleaded (91 octane or higher)
- Fuel pressure: 200 bar (2900 psi)
Emissions Control
- EU6d-TEMP emissions standard compliant
- Dual catalytic converters with oxygen sensors
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced emissions
Note: The emissions system is optimized for both performance and environmental compliance.
Maintenance and Service
Guidelines for maintaining and servicing the 2.0l-engine, including oil specifications and service intervals.
Maintenance and Service
Guidelines for maintaining and servicing the 2.0l-engine, including oil specifications and service intervals.
Oil Specifications
- Recommended oil grade: SAE 5W-30 or 5W-40
- Oil capacity: 5.2 liters (with filter)
- Oil change interval: 10,000 miles or 12 months
- Oil filter type: Cartridge-style with replaceable element
Service Intervals
- Spark plug replacement: Every 60,000 miles
- Air filter replacement: Every 30,000 miles
- Coolant replacement: Every 4 years or 50,000 miles
- Timing chain: Lifetime maintenance-free
Note: Service intervals may vary based on driving conditions and usage.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- B48B20
- Displacement
- 1998 cc
- Configuration
- Inline 4-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Oil Capacity
- 5.2 liters
- Oil Type
- BMW Longlife-01 FE 0W-20 or 0W-30
- Coolant Capacity
- 7.5 liters
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor
Performance
- Max Power
- 248 hp @ 5200-6500 rpm
- Max Torque
- 258 lb-ft @ 1450-4800 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Fuel System
- Direct injection with High Precision Injection
Dimensions And Weight
- Engine Length
- 520 mm
- Engine Width
- 720 mm
- Engine Height
- 610 mm
- Dry Weight
- 152 kg
- Wet Weight
- 168 kg
Cylinder Block
- Material
- Aluminum alloy with cast iron cylinder liners
- Bore
- 82 mm
- Stroke
- 94.6 mm
- Cylinder Spacing
- 90 mm
- Main Bearing Diameter
- 60 mm
Cylinder Head
- Material
- Aluminum alloy
- Valvetrain
- DOHC with Double-VANOS and Valvetronic
- Valve Diameter intake
- 32 mm
- Valve Diameter Exhaust
- 28 mm
- Valve Angle
- 21 degrees
Turbocharger
- Type
- Twin-scroll turbocharger
- Boost Pressure
- 18 psi
- Wastegate Control
- Electronically controlled
- intercooler Type
- Air-to-air
- Turbo Part Number
- 11-62-8-644-123
Fuel System
- injection Pressure
- 200 bar
- injector Part Number
- 13-62-8-644-456
- Fuel Pump Type
- High-pressure electric fuel pump
- Fuel Filter Part Number
- 13-32-7-566-789
- Fuel Rail Pressure Sensor Part Number
- 13-62-8-644-321
Ignition System
- Spark Plug Type
- BMW Longlife spark plug
- Spark Plug Gap
- 0.8 mm
- Spark Plug Part Number
- 12-12-0-037-890
- Ignition Coil Part Number
- 12-13-7-566-123
- Ignition Timing
- Fully electronic with adaptive control
Lubrication System
- Oil Pump Type
- Variable displacement vane pump
- Oil Filter Part Number
- 11-42-7-566-234
- Oil Pressure
- 3.5-4.5 bar at 2000 rpm
- Oil Cooler Type
- Integrated water-to-oil cooler
Cooling System
- Thermostat Opening Temperature
- 97°C
- Water Pump Type
- Electric
- Radiator Part Number
- 17-11-7-566-345
- Coolant Pump Part Number
- 11-51-7-566-678
- Coolant Temperature Sensor Part Number
- 13-62-8-644-987
Emissions
- Emission Standard
- EU6 / LEV3
- Catalytic Converter Type
- Close-coupled with secondary catalyst
- Oxygen Sensor Part Number
- 11-78-7-566-432
- EGR System
- Integrated with turbocharger
- Particulate Filter
- Optional gasoline particulate filter
Maintenance
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Life
- Lifetime (no scheduled replacement)
- Coolant Replacement interval
- 4 years or 50000 miles
- Air Filter Replacement interval
- 30000 miles
Diagnostics
- OBDII Compliance
- Fully compliant
- Diagnostic Connector Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tool
- BMW ISTA+ or compatible OBDII scanner
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Engine oil and filter change
- Inspect and top off all fluid levels
- Check and adjust tire pressures
- Inspect brake system components
Use only BMW-approved fluids and parts
- Replace engine air filter
- Inspect and replace cabin air filter if necessary
- Check and replace spark plugs if necessary
- Inspect and clean fuel injectors
Follow BMW-recommended procedures for all replacements
- Replace spark plugs
- Inspect and replace timing chain if necessary
- Replace coolant
- Inspect and replace drive belts if necessary
Timing chain inspection is critical at this interval
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2018-Present BMW X4?
What is the horsepower and torque output of the 2.0L engine in the 2018-Present BMW X4?
The 2.0L turbocharged inline-4 engine in the BMW X4 produces 248 horsepower at 5,200-6,500 rpm and 258 lb-ft of torque at 1,450-4,800 rpm, depending on the specific model and trim.
Q2 What type of fuel system does the 2.0L engine use?
What type of fuel system does the 2.0L engine use?
The 2.0L engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance. It is compatible with premium unleaded gasoline (91 octane or higher).
Q3 What is the recommended oil type and capacity for the 2.0L engine?
What is the recommended oil type and capacity for the 2.0L engine?
The 2.0L engine requires 5.3 quarts (5.0 liters) of BMW-approved synthetic oil, such as SAE 5W-30 or 0W-20, meeting BMW Longlife-01 or Longlife-17 FE specifications.
Q4 What is the service interval for the 2.0L engine?
What is the service interval for the 2.0L engine?
BMW recommends an oil change every 10,000 miles or 12 months, whichever comes first. Other maintenance tasks, such as spark plug replacement, are typically required every 60,000 miles.
Q5 Does the 2.0L engine support start-stop technology?
Does the 2.0L engine support start-stop technology?
Yes, the 2.0L engine is equipped with BMW's EfficientDynamics start-stop system, which automatically shuts off the engine when the vehicle is stationary to reduce fuel consumption and emissions.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X4 Owner's Manual
Coming SoonThe official owner's manual for the BMW X4, containing detailed information on the 2.0L engine, maintenance schedules, and operational guidelines.
BMW Technical Service Bulletins
Coming SoonAccess the latest technical service bulletins (TSBs) for the 2.0L engine, including updates, recalls, and repair procedures.
BMW Genuine Parts Catalog
Coming SoonExplore the official catalog for genuine BMW parts and accessories compatible with the 2.0L engine, ensuring optimal performance and warranty compliance.
BMW Service and Warranty Guide
Coming SoonA comprehensive guide to BMW's service and warranty policies, including coverage details and requirements for the 2.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.