BMW X4 2014-2018

BMW X4 2014-2018 2.0L Engine Specifications

Detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine in the 2014-2018 BMW X4. Includes performance metrics, maintenance guidelines, and component-specific details for the N20 and B48 engine variants.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the 2.0l-engine specifications for the 2014-2018 BMW X4, including key features, measurements, and technical details

How to Use

Use the search function to locate specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Horsepower

248 hp @ 5200-6500 rpm

Torque

258 lb-ft @ 1450-4800 rpm

Displacement

1998 cc

Fuel Economy

24 mpg (combined)

Oil Capacity

5.2 liters

Available Specifications

Engine Performance

Detailed information on the performance characteristics of the 2.0l-engine

Power Output

Maximum horsepower: 248 hp @ 5200-6500 rpm
Peak torque: 258 lb-ft @ 1450-4800 rpm
Compression ratio: 10.2:1
Redline: 7000 rpm

Fuel Efficiency

City fuel economy: 21 mpg
Highway fuel economy: 28 mpg
Combined fuel economy: 24 mpg
Fuel type: Premium unleaded (91 octane or higher)

Note: Fuel efficiency may vary based on driving conditions and vehicle configuration.

Engine Design

Technical details about the design and construction of the 2.0l-engine

Engine Block and Components

Engine type: Turbocharged inline-4
Displacement: 1998 cc
Bore x Stroke: 94.6 mm x 82.0 mm
Cylinder head material: Aluminum

Turbocharging System

Turbocharger type: Twin-scroll turbo
Maximum boost pressure: 18.1 psi
Intercooler type: Air-to-air
Turbo lag: Minimal due to twin-scroll design

Note: The twin-scroll turbocharger enhances throttle response and reduces turbo lag.

Engine Management

Details on the engine control systems and technologies

Engine Control Unit (ECU)

ECU type: Bosch MEVD17.2
Fuel injection system: Direct injection
Ignition system: Coil-on-plug
Valvetrain: DOHC with Valvetronic and VANOS

Emission Control

Emissions standard: Euro 6 compliant
Catalytic converter: Close-coupled
Exhaust gas recirculation (EGR): Yes
Particulate filter: Optional

Note: The close-coupled catalytic converter reduces cold-start emissions.

Maintenance Specifications

Key maintenance details and intervals for the 2.0l-engine

Oil and Fluid Requirements

Engine oil capacity: 5.2 liters
Recommended oil type: SAE 5W-30 synthetic
Coolant capacity: 8.5 liters
Transmission fluid type: ZF Lifeguard 8

Service Intervals

Oil change interval: 10,000 miles or 12 months
Spark plug replacement: 60,000 miles
Timing chain inspection: 100,000 miles
Air filter replacement: 30,000 miles

Note: Service intervals may vary based on driving conditions and usage.

Search Specifications

Search by specification name, value, or description

Engine Specifications

General

Engine Code: B48B20

Displacement: 1998 cc

Configuration: Inline-4

Aspiration: Turbocharged

Fuel Type: Petrol

Manufacturer: BMW

Production Years: 2014-2018

Performance

Max Power: 252 hp @ 5200 rpm

Max Torque: 258 lb-ft @ 1450-4800 rpm

Compression Ratio: 11.0:1

Redline: 7000 rpm

Dimensions

Bore: 82 mm

Stroke: 94.6 mm

Cylinder Spacing: 90 mm

Engine Weight: 152 kg

Fuel System

injection Type: Direct Injection

Fuel Pressure: 200 bar

injector Part Number: 13537585210

Fuel Filter Part Number: 13327707222

Cooling System

Coolant Capacity: 7.5 liters

Thermostat Opening Temperature: 97°C

Radiator Part Number: 17117586961

Water Pump Part Number: 11518617809

Lubrication System

Oil Capacity: 5.2 liters

Oil Type: BMW Longlife-01 FE 5W-30

Oil Filter Part Number: 11427566327

Oil Pump Type: Variable displacement

Ignition System

Spark Plug Type: NGK SILZKBR8D8S

Spark Plug Gap: 0.8 mm

Ignition Coil Part Number: 12138616153

Ignition Timing: Adjustable via ECU

Emissions

Emission Standard: EU6

Catalytic Converter Part Number: 18307585261

Oxygen Sensor Part Number: 11787585234

EGR System: Integrated

Maintenance

Service interval: 15000 miles or 12 months

Timing Chain Replacement Interval: Lifetime (inspection recommended at 100000 miles)

Belt Drive System: Timing chain

Valve Clearance: Hydraulic lifters (no adjustment required)

Diagnostics

OBD2 Port Location: Under dashboard, driver's side

Common Fault Codes

P0171
P0300
P0420

Diagnostic Tool: BMW ISTA/D

Sensor References: Crankshaft Position Sensor: 12147585234
Camshaft Position Sensor: 12147585235

Service Information Service

Detailed service requirements and schedules for the 2.0l-engine

15000

Oil and filter change
Inspect air filter
Check coolant level
Inspect spark plugs

Use only BMW-approved fluids and parts

30000

Replace air filter
Inspect fuel system
Check timing chain tension
Inspect exhaust system

Perform additional checks if vehicle is driven under severe conditions

60000

Replace spark plugs
Inspect and replace coolant if necessary
Check and replace drive belts if necessary
Inspect turbocharger system

Ensure all components are torqued to manufacturer specifications

Common Questions

Find answers to common questions about torque specifications

What is the horsepower and torque output of the 2.0l-engine in the 2014-2018 BMW X4?

The 2.0l turbocharged inline-4 engine in the 2014-2018 BMW X4 produces 240 horsepower at 5000-6500 RPM and 260 lb-ft of torque at 1250-4800 RPM.

What type of fuel system does the 2.0l-engine use?

The 2.0l-engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance.

What is the recommended oil type and capacity for the 2.0l-engine?

The recommended oil type is BMW Longlife-01 FE 5W-30 or equivalent. The oil capacity is approximately 5.0 liters (5.3 quarts) including the oil filter.

What is the engine displacement and compression ratio of the 2.0l-engine?

The engine displacement is 1998 cc (2.0 liters), and the compression ratio is 10.2:1.

What is the service interval for the 2.0l-engine?

The service interval for the 2.0l-engine is typically every 10,000 miles or 12 months, whichever comes first, as per BMW's Condition Based Service (CBS) system.

Does the 2.0l-engine require premium fuel?

Yes, BMW recommends using premium unleaded fuel with an octane rating of 91 or higher for optimal performance and efficiency.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW X4 2.0l Engine Technical Specifications

Coming Soon

Detailed technical specifications for the 2.0l turbocharged engine, including performance metrics and maintenance guidelines.

BMW X4 Owner's Manual

Coming Soon

Official owner's manual for the 2014-2018 BMW X4, covering engine maintenance, service intervals, and troubleshooting.

BMW Genuine Parts Catalog

Coming Soon

Access the official BMW parts catalog to find genuine components for the 2.0l-engine, ensuring compatibility and performance.

BMW Service and Maintenance Guide

Coming Soon

Comprehensive guide to servicing and maintaining the 2.0l-engine, including recommended procedures and safety precautions.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.