BMW X3 2022-present 3.0L Engine Specifications
Explore detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2022-Present BMW X3. Learn about engine performance, torque, horsepower, fuel injection, turbocharging, cooling systems, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2022-Present BMW X3, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'displacement'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
2998 cc
Horsepower
382 hp @ 6500 rpm
Torque
369 lb-ft @ 1850-5000 rpm
Fuel Economy
24 mpg (combined)
Oil Capacity
6.5 liters
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum horsepower: 382 hp @ 6500 rpm
- Peak torque: 369 lb-ft @ 1850-5000 rpm
- Redline: 7000 rpm
- Compression ratio: 11.0:1
- Fuel delivery: Direct injection
Acceleration and Top Speed
- 0-60 mph: 4.4 seconds
- Top speed: 155 mph (electronically limited)
- Drag coefficient: 0.29 Cd
- Transmission: 8-speed automatic with paddle shifters
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design and Construction
Technical details on the design, materials, and construction of the 3.0l-engine.
Engine Design and Construction
Technical details on the design, materials, and construction of the 3.0l-engine.
Engine Block and Components
- Engine type: Inline 6-cylinder
- Displacement: 2998 cc
- Bore x Stroke: 84.0 mm x 89.6 mm
- Cylinder head material: Aluminum alloy
- Crankshaft material: Forged steel
Cooling and Lubrication
- Cooling system: Liquid-cooled with electric water pump
- Oil capacity: 6.5 liters
- Oil type: Synthetic 0W-20
- Oil change interval: 10,000 miles or 12 months
Note: Always use BMW-approved fluids to maintain optimal engine performance.
Fuel Efficiency and Emissions
Information on the fuel efficiency, emissions, and environmental impact of the 3.0l-engine.
Fuel Efficiency and Emissions
Information on the fuel efficiency, emissions, and environmental impact of the 3.0l-engine.
Fuel Economy
- City: 21 mpg
- Highway: 28 mpg
- Combined: 24 mpg
- Fuel tank capacity: 17.2 gallons
- Fuel type: Premium unleaded (91 octane or higher)
Emissions
- CO2 emissions: 235 g/km
- Compliance: Euro 6d and EPA Tier 3 standards
- Exhaust system: Dual exhaust with catalytic converters
- Particulate filter: Standard
Note: Emissions figures are based on standardized testing and may vary in real-world conditions.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure longevity and optimal performance.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure longevity and optimal performance.
Service Intervals
- Oil change: Every 10,000 miles or 12 months
- Spark plug replacement: Every 60,000 miles
- Air filter replacement: Every 30,000 miles
- Coolant flush: Every 50,000 miles or 5 years
Diagnostics and Troubleshooting
- Onboard diagnostics: OBD-II compliant
- Check engine light: Illuminates for critical faults
- Service indicator: Displays maintenance reminders
- Diagnostic port location: Under the dashboard
Note: Always refer to the vehicle's onboard diagnostics system for accurate fault codes and troubleshooting.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30M1
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Part Number
- 11002460123
Performance
- Max Power
- 382 hp @ 5800-6500 rpm
- Max Torque
- 369 lb-ft @ 1800-5000 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph
- 4.4 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- injection Type
- Direct injection
- injection Pressure
- 350 bar
- Fuel Pump Type
- High-pressure electric fuel pump
- Fuel Filter Part Number
- 13327707222
- Emission Standard
- EU6d, ULEV50
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586961
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor (G48)
- Coolant Mix Ratio
- 50:50 (antifreeze:water)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW TwinPower Turbo LL-01 FE 0W-20 or 0W-30
- Oil Filter Part Number
- 11427837929
- Oil Change interval
- 10000 miles or 12 months
- Oil Pump Type
- Variable displacement vane pump
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138657273
- Ignition Timing
- Fully electronic with knock control
Valvetrain
- Valve Configuration
- DOHC, 4 valves per cylinder
- Valve Material
- Hollow-stem intake valves, sodium-filled exhaust valves
- Camshaft Type
- Double VANOS (variable valve timing)
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Timing Chain Type
- Dual-row, maintenance-free
Turbocharger
- Turbo Type
- Twin-scroll turbocharger
- Boost Pressure
- 18.9 psi (1.3 bar)
- Wastegate Type
- Electronically controlled
- intercooler Type
- Air-to-air
- Turbo Part Number
- 11657849456
Exhaust System
- Catalytic Converter Type
- Close-coupled, 3-way
- Exhaust Manifold Material
- Cast iron with integrated turbocharger housing
- Oxygen Sensor Type
- Wideband
- Exhaust Pipe Diameter
- 70 mm
- Particulate Filter
- Integrated gasoline particulate filter (GPF)
Engine Management
- Ecu Type
- Bosch MEVD17.2.6
- Sensors
-
- Crankshaft position sensor
- Camshaft position sensor
- Knock sensor
- Intake air temperature sensor
- Coolant temperature sensor
- Diagnostic interface
- OBD-II compliant
- Software Version
- ISTA/P 4.40.2x
Maintenance
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Inspection Interval
- 100000 miles
- Serpentine Belt Replacement Interval
- 90000 miles
- Air Filter Replacement interval
- 30000 miles
- Fuel Filter Replacement interval
- 60000 miles
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Engine oil and filter change
- Inspect brake system
- Check coolant level and condition
- Inspect exhaust system
- Check tire pressure and condition
Use only BMW-approved fluids and parts
- Replace engine air filter
- Inspect spark plugs
- Check valve clearance (hydraulic lifters)
- Inspect drive belts
Perform additional checks if vehicle is driven under severe conditions
- Replace spark plugs
- Replace fuel filter
- Inspect timing chain
- Check turbocharger system
Reset service interval counter after maintenance
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2022-Present BMW X3?
What is the horsepower and torque output of the 3.0L engine in the 2022-Present BMW X3?
The 3.0L turbocharged inline-6 engine in the 2022-Present BMW X3 produces 382 horsepower at 5,800-6,500 rpm and 369 lb-ft of torque at 1,800-5,000 rpm. This engine is part of the B58 engine family and features BMW's TwinPower Turbo technology.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine in the BMW X3 utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance. It is designed to work with premium unleaded gasoline (91 octane or higher) for optimal operation.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The 3.0L engine requires synthetic motor oil meeting BMW Longlife-01 FE or LL-17 FE+ specifications. The oil capacity is approximately 6.5 liters (6.9 quarts). Always refer to the owner's manual or service documentation for the exact specifications.
Q4 Does the 3.0L engine feature a cooling system for the turbocharger?
Does the 3.0L engine feature a cooling system for the turbocharger?
Yes, the 3.0L engine includes an advanced cooling system for the turbocharger, featuring both liquid and air cooling. This ensures optimal performance and longevity of the turbocharger under high-load conditions.
Q5 What is the service interval for spark plugs on the 3.0L engine?
What is the service interval for spark plugs on the 3.0L engine?
The recommended service interval for spark plugs on the 3.0L engine is approximately every 60,000 miles or as specified in the vehicle's maintenance schedule. Use only BMW-approved spark plugs to ensure proper engine performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X3 3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 3.0L engine, including performance metrics, dimensions, and system configurations.
BMW TwinPower Turbo Technology Overview
Coming SoonLearn about BMW's TwinPower Turbo technology, including how it enhances performance and efficiency in the 3.0L engine.
BMW X3 Maintenance Schedule
Coming SoonAccess the official maintenance schedule for the 2022-Present BMW X3, including service intervals for the 3.0L engine.
Genuine BMW Parts Catalog
Coming SoonExplore the catalog of genuine BMW parts and accessories designed specifically for the 3.0L engine and other components.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.