BMW X3 2022-present 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine in the 2022-Present BMW X3. Includes performance data, maintenance guidelines, and system overviews.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2022-Present BMW X3, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'displacement'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections labeled 'Engine Performance', 'Fuel System', 'Cooling System', and 'Emissions Control'.
Key Specifications
Displacement
2.0 liters
Horsepower
248 hp @ 5200-6500 rpm
Torque
258 lb-ft @ 1450-4800 rpm
Fuel Capacity
17.2 gallons
CO2 Emissions
198 g/km
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum horsepower: 248 hp @ 5200-6500 rpm
- Peak torque: 258 lb-ft @ 1450-4800 rpm
- Compression ratio: 10.2:1
- Redline: 7000 rpm
Acceleration and Efficiency
- 0-60 mph acceleration: 6.0 seconds
- Top speed: 130 mph (electronically limited)
- Fuel efficiency: 25 mpg city / 33 mpg highway
- CO2 emissions: 198 g/km
Note: Performance figures may vary based on driving conditions and vehicle configuration.
Fuel System
Technical details about the fuel delivery system, including injection type, fuel capacity, and consumption rates.
Fuel System
Technical details about the fuel delivery system, including injection type, fuel capacity, and consumption rates.
Fuel Injection
- Direct fuel injection system
- High-pressure fuel pump: 200 bar
- Fuel tank capacity: 17.2 gallons
- Fuel type: Premium unleaded (91 octane or higher)
Fuel Consumption
- Combined fuel economy: 28 mpg
- City fuel economy: 25 mpg
- Highway fuel economy: 33 mpg
- Range: Approximately 480 miles on a full tank
Cooling System
Details on the engine cooling system, including radiator specifications, coolant capacity, and operating temperatures.
Cooling System
Details on the engine cooling system, including radiator specifications, coolant capacity, and operating temperatures.
Coolant System
- Coolant capacity: 10.6 liters
- Radiator type: Aluminum cross-flow
- Operating temperature range: 90°C - 105°C
- Coolant type: BMW-approved ethylene glycol-based coolant
Thermostat and Fans
- Electronically controlled thermostat
- Dual electric cooling fans
- Fan speed: Variable based on engine load and temperature
- Coolant flow rate: 120 liters per minute at peak
Note: Ensure coolant levels are checked regularly to prevent overheating.
Emissions Control
Information on the emissions control systems, including catalytic converters, particulate filters, and compliance standards.
Emissions Control
Information on the emissions control systems, including catalytic converters, particulate filters, and compliance standards.
Exhaust System
- Twin-scroll turbocharger with integrated exhaust manifold
- Catalytic converter: Close-coupled design
- Particulate filter: Standard on all models
- Exhaust gas recirculation (EGR) system
Compliance
- Meets Euro 6d and EPA Tier 3 emissions standards
- NOx emissions: 0.03 g/km
- Particulate matter emissions: 0.001 g/km
- On-board diagnostics (OBD) system for emissions monitoring
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- B48B20
- Displacement
- 1998 cc
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline
- Manufacturer
- BMW
- Part Number
- 11002412345
Performance
- Max Power
- 248 hp @ 5200-6500 rpm
- Max Torque
- 258 lb-ft @ 1450-4800 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Fuel System
- Direct injection
Dimensions And Weight
- Engine Length
- 20.5 in
- Engine Width
- 24.8 in
- Engine Height
- 22.0 in
- Dry Weight
- 319 lbs
- Oil Capacity
- 5.3 quarts
Cooling System
- Coolant Capacity
- 10.6 quarts
- Thermostat Opening Temperature
- 194°F
- Radiator Cap Pressure
- 21.7 psi
- Coolant Type
- BMW Antifreeze/Coolant
- Part Number
- 82141467704
Lubrication System
- Oil Type
- BMW TwinPower Turbo 0W-20
- Oil Pressure
- 43.5-58 psi @ 2000 rpm
- Oil Filter Part Number
- 11427566327
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- BMW NGK SILZKBR8D8S
- Spark Plug Gap
- 0.028-0.031 in
- Ignition Coil Part Number
- 12138657273
- Ignition Timing
- 10° BTDC @ idle
Fuel System
- Fuel Pump Pressure
- 72.5 psi
- injector Flow Rate
- 200 cc/min @ 3 bar
- Fuel Filter Part Number
- 13327706000
- Fuel Tank Capacity
- 17.2 gallons
Emissions
- Emission Standard
- EU6 / Tier 3
- Catalytic Converter Part Number
- 18307585291
- Egr System
- Integrated in turbocharger
- O2 Sensor Part Number
- 11787558025
Maintenance
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Lifetime, no replacement required
- Belt Drive
- Serpentine belt, replace every 60000 miles
- Belt Part Number
- 11287628655
- Air Filter Part Number
- 13717586977
Diagnostics
- Obd2 Port Location
- Under dashboard, driver's side
- Fault Code Reading
- BMW ISTA/D or compatible OBD2 scanner
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Notes
- Use BMW-specific diagnostic tools for accurate readings
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Oil and oil filter change
- Inspect and replace air filter if necessary
- Check and top off all fluid levels
- Inspect belts and hoses
Use only BMW-approved fluids and parts
- Replace spark plugs
- Inspect and replace fuel filter if necessary
- Check and adjust valve clearance if applicable
- Inspect cooling system for leaks
Valve clearance is self-adjusting, no manual adjustment needed
- Replace serpentine belt
- Inspect and replace timing chain if necessary
- Check and replace coolant if necessary
- Inspect and replace O2 sensors if necessary
Timing chain is designed for lifetime use but should be inspected for wear
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2022-Present BMW X3?
What is the horsepower and torque output of the 2.0L engine in the 2022-Present BMW X3?
The 2.0L turbocharged inline-4 engine in the 2022-Present BMW X3 produces 248 horsepower at 5,200-6,500 rpm and 258 lb-ft of torque at 1,450-4,800 rpm. These figures may vary slightly depending on the specific trim and model year.
Q2 What type of fuel does the 2.0L engine require?
What type of fuel does the 2.0L engine require?
The 2.0L engine in the BMW X3 requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower-octane fuel may result in reduced performance and efficiency.
Q3 What is the oil capacity and recommended oil type for the 2.0L engine?
What is the oil capacity and recommended oil type for the 2.0L engine?
The 2.0L engine has an oil capacity of approximately 5.3 quarts (5.0 liters). BMW recommends using synthetic motor oil with a viscosity of SAE 0W-20 or 5W-30, meeting BMW Longlife-01 FE or Longlife-17 FE specifications.
Q4 What is the recommended service interval for the 2.0L engine?
What is the recommended service interval for the 2.0L engine?
BMW recommends servicing the 2.0L engine every 10,000 miles or 12 months, whichever comes first. This includes oil changes, filter replacements, and inspections of critical components such as the cooling system, belts, and hoses.
Q5 Does the 2.0L engine feature BMW's TwinPower Turbo technology?
Does the 2.0L engine feature BMW's TwinPower Turbo technology?
Yes, the 2.0L engine is equipped with BMW's TwinPower Turbo technology, which includes a twin-scroll turbocharger, direct fuel injection, and VALVETRONIC variable valve timing. These features enhance performance, efficiency, and throttle response.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X3 Owner's Manual
Coming SoonThe official owner's manual for the 2022-Present BMW X3, providing detailed information on vehicle operation, maintenance, and specifications.
BMW Service and Warranty Guide
Coming SoonA comprehensive guide outlining BMW's recommended service intervals, warranty coverage, and maintenance requirements for the 2.0L engine.
BMW Genuine Parts Catalog
Coming SoonAccess the official catalog of genuine BMW parts and accessories for the 2.0L engine, ensuring optimal performance and compatibility.
BMW Technical Service Bulletins
Coming SoonStay updated with the latest technical service bulletins (TSBs) for the 2.0L engine, addressing common issues and recommended fixes.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.