BMW X3 2017-2021 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2017-2021 BMW X3. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2017-2021 BMW X3, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or the sidebar menu. Each section is labeled for easy access to specific engine details.
Key Specifications
Displacement
3.0 liters (2,998 cc)
Horsepower
382 hp (285 kW)
Torque
369 lb-ft (500 Nm)
Compression Ratio
10.2:1
Fuel Economy
22 mpg (combined)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Power and Torque
- Maximum power output: 382 hp (285 kW) at 5,800-6,500 rpm
- Peak torque: 369 lb-ft (500 Nm) at 1,520-4,800 rpm
- Compression ratio: 10.2:1
- Direct fuel injection system for optimal efficiency
- TwinPower Turbo technology for enhanced performance
Acceleration and Top Speed
- 0-60 mph acceleration: 4.6 seconds
- Top speed: 155 mph (electronically limited)
- Engine redline: 7,000 rpm
- Dynamic stability control for improved handling
- Adaptive suspension system for varying driving conditions
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design and Construction
Technical details about the design, materials, and construction of the 3.0l-engine.
Engine Design and Construction
Technical details about the design, materials, and construction of the 3.0l-engine.
Engine Block and Components
- Aluminum engine block for reduced weight
- Forged steel crankshaft for durability
- Double-VANOS variable valve timing system
- Valvetronic fully variable valve lift control
- Lightweight magnesium valve cover
Cooling and Lubrication
- High-performance water-cooling system
- Oil capacity: 6.5 liters (6.9 quarts)
- Electronically controlled oil pump
- Integrated oil cooler for optimal temperature management
- Low-friction piston rings for improved efficiency
Note: Regular maintenance of the cooling and lubrication systems is critical for engine longevity.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance with environmental standards.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance with environmental standards.
Fuel System
- Fuel type: Premium unleaded gasoline (91 octane or higher)
- Fuel tank capacity: 17.2 gallons (65 liters)
- Combined fuel economy: 22 mpg
- High-pressure direct injection system
- Start-stop technology for reduced fuel consumption
Emissions and Compliance
- EURO 6 emissions standard compliant
- Dual exhaust system with catalytic converters
- Particulate filter for reduced emissions
- Onboard diagnostics (OBD) system for emissions monitoring
- Low CO2 emissions: 199 g/km
Note: Emissions data is based on standardized testing and may vary in real-world conditions.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure optimal performance.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine to ensure optimal performance.
Service Intervals
- Oil change interval: 10,000 miles or 12 months
- Spark plug replacement: 60,000 miles
- Air filter replacement: 30,000 miles
- Coolant flush: 50,000 miles or 5 years
- Timing chain inspection: 100,000 miles
Diagnostics and Troubleshooting
- Integrated diagnostic system for fault detection
- Common fault codes include P0171 (system too lean) and P0300 (random misfire)
- Recommended diagnostic tools: BMW ISTA or equivalent
- Regular software updates for engine control unit (ECU)
- Check engine light indicators and troubleshooting steps
Note: Always use BMW-approved tools and software for diagnostics and repairs.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- B58B30
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2017-2021
Performance
- Max Power
- 382 hp @ 6500 rpm
- Max Torque
- 369 lb-ft @ 1520-4800 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0 To 60 Mph
- 4.6 seconds
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13538616079
- Fuel Pump Part Number
- 16148659973
- Fuel Filter Part Number
- 13327707222
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586945
- Water Pump Part Number
- 11518638195
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20 or 0W-30
- Oil Filter Part Number
- 11427837969
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Part Number
- 12120039664
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138616153
- Ignition Timing
- Adjustable via DME
- Spark Plug Torque
- 23 Nm
Emissions
- Emission Standard
- EU6 / LEV3
- Catalytic Converter Part Number
- 18307585203
- Oxygen Sensor Part Number
- 11787598025
- EGR System
- Integrated with turbocharger
- Particulate Filter
- Optional
Engine Management
- ECU Part Number
- 7557843
- Software Version
- I-Level 21-03
- Diagnostic interface
- OBD-II
- Sensor References
- Crankshaft Position Sensor: 12147584761Camshaft Position Sensor: 12147584762Knock Sensor: 12147584763
Maintenance
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Timing Chain
- Lifetime (no scheduled replacement)
- Belt Drive
- Serpentine Belt Part Number: 11287628605Belt Tensioner Part Number: 11287628606Replacement interval: 60000 miles or 6 years
- Air Filter Part Number
- 13717586947
- Cabin Filter Part Number
- 64319264375
Diagnostics
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tools
-
- ISTA/D
- INPA
- BMW Scanner
- Sensor Tolerances
- Oxygen Sensor: ±0.1 VKnock Sensor: ±5%Crankshaft Sensor: ±2°
- Diagnostic Procedures
-
- Check for stored fault codes
- Perform live data monitoring
- Verify sensor outputs
Service Information Service
Detailed service requirements and schedules for the 3.0L B58 engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect belts and hoses
Use only BMW-approved fluids and parts
- Replace air filter
- Replace cabin filter
- Inspect spark plugs
- Check fuel system
Perform additional checks if vehicle is driven in harsh conditions
- Replace serpentine belt
- Replace brake fluid
- Inspect cooling system
- Check transmission fluid
Follow BMW-recommended procedures for all replacements
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2017-2021 BMW X3?
What is the horsepower and torque output of the 3.0L engine in the 2017-2021 BMW X3?
The 3.0L turbocharged inline-6 engine in the 2017-2021 BMW X3 produces 355 horsepower at 5,500-6,500 rpm and 369 lb-ft of torque at 1,520-4,800 rpm. This engine is part of the B58 engine family and features TwinPower Turbo technology.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a high-precision direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance. It operates at a fuel pressure of up to 200 bar (2,900 psi) for precise combustion control.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The 3.0L engine requires BMW-approved synthetic oil with a viscosity of SAE 0W-30 or 5W-30. The oil capacity is approximately 6.5 liters (6.9 quarts) when including the oil filter. Always refer to the owner's manual for specific recommendations.
Q4 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The 3.0L engine has a compression ratio of 11.0:1, which is optimized for performance and efficiency in conjunction with the turbocharging system.
Q5 What is the service interval for spark plugs on the 3.0L engine?
What is the service interval for spark plugs on the 3.0L engine?
The spark plugs on the 3.0L engine should be replaced every 60,000 miles (96,000 km) or as specified in the vehicle's maintenance schedule. Use only BMW-approved spark plugs to ensure proper performance.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW B58 Engine Technical Overview
Coming SoonA detailed technical guide covering the design, features, and specifications of the B58 3.0L engine used in the BMW X3.
BMW X3 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2017-2021 BMW X3, including service intervals for the 3.0L engine.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other systems.
BMW Turbocharging Technology Guide
Coming SoonLearn about the TwinPower Turbo technology used in the 3.0L engine and its impact on performance and efficiency.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.