BMW X1 2022-present 2.0L Engine Specifications
Explore detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine in the 2022-Present BMW X1. Learn about performance metrics, torque, horsepower, fuel injection, turbocharging, emissions, and maintenance for the B48 engine family.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2022-Present BMW X1, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'fuel system'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections listed below.
Key Specifications
Displacement
2.0 liters (1998 cc)
Horsepower
228 hp (170 kW)
Torque
258 lb-ft (350 Nm)
Fuel Efficiency
28 mpg city / 38 mpg highway
Oil Capacity
5.3 quarts (5.0 liters)
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 2.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 2.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum power output: 228 hp (170 kW) at 5000-6000 rpm
- Peak torque: 258 lb-ft (350 Nm) at 1450-4500 rpm
- Compression ratio: 10.2:1
- Redline: 6500 rpm
Acceleration and Top Speed
- 0-60 mph acceleration: 6.2 seconds
- Top speed: 130 mph (electronically limited)
- Fuel efficiency: 28 mpg city / 38 mpg highway
- CO2 emissions: 168 g/km
Note: Performance figures may vary based on driving conditions and vehicle configuration.
Engine Design and Components
Technical details about the engine's design, construction, and key components.
Engine Design and Components
Technical details about the engine's design, construction, and key components.
Engine Block and Cylinder Head
- Aluminum engine block with cast iron cylinder liners
- DOHC (Double Overhead Camshaft) design
- 16-valve configuration with variable valve timing (VVT)
- Direct fuel injection system
Turbocharging System
- Single twin-scroll turbocharger
- Maximum boost pressure: 18 psi (1.24 bar)
- Intercooler type: Air-to-air
- Turbo lag minimized by twin-scroll design
Note: The twin-scroll turbocharger enhances throttle response and efficiency.
Fuel and Emissions
Information on the fuel system, emissions control, and compliance standards.
Fuel and Emissions
Information on the fuel system, emissions control, and compliance standards.
Fuel System
- Direct fuel injection with high-pressure pump
- Fuel tank capacity: 14.2 gallons (53.7 liters)
- Recommended fuel: Premium unleaded (91 octane or higher)
- Fuel delivery pressure: 2900 psi (200 bar)
Emissions Control
- Compliant with Euro 6d and EPA Tier 3 standards
- Equipped with a three-way catalytic converter
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced emissions
Note: Regular maintenance is required to ensure emissions compliance.
Cooling and Lubrication
Details on the engine's cooling and lubrication systems to ensure optimal performance and longevity.
Cooling and Lubrication
Details on the engine's cooling and lubrication systems to ensure optimal performance and longevity.
Cooling System
- Liquid-cooled with electric water pump
- Radiator capacity: 1.5 gallons (5.7 liters)
- Thermostat opening temperature: 194°F (90°C)
- Coolant type: BMW-approved ethylene glycol-based coolant
Lubrication System
- Wet sump lubrication system
- Oil capacity: 5.3 quarts (5.0 liters)
- Recommended oil: BMW TwinPower Turbo 0W-20
- Oil change interval: 10,000 miles or 12 months
Note: Use only BMW-approved lubricants to maintain warranty coverage.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- B48A20
- Displacement
- 1998 cc
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline (91 RON minimum)
- Manufacturer
- BMW AG
- Part Number
- 11 00 8 617 123
Performance
- Max Power
- 228 hp @ 5000-6000 rpm
- Max Torque
- 258 lb-ft @ 1450-4500 rpm
- Compression Ratio
- 10.2:1
- Redline
- 7000 rpm
- 0-60 Mph
- 6.3 seconds
- Top Speed
- 149 mph (electronically limited)
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13 53 8 618 789
- Fuel Filter Part Number
- 13 32 8 617 456
- Fuel Pump Part Number
- 16 14 8 617 890
Cooling System
- Coolant Capacity
- 7.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17 11 8 617 345
- Water Pump Part Number
- 11 51 8 617 678
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 5.25 liters
- Oil Type
- BMW Longlife-01 FE 0W-20
- Oil Filter Part Number
- 11 42 8 617 234
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK SILZKGR8B8S
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12 13 8 617 567
- Ignition Timing
- 10° BTDC @ idle
- Spark Plug Torque
- 23 Nm
Emissions
- Emission Standard
- EU6d, ULEV50
- Catalytic Converter Part Number
- 18 30 8 617 901
- Oxygen Sensor Part Number
- 11 78 8 617 345
- EGR System
- Integrated into turbocharger
- Particulate Filter
- Standard (GPF)
Turbocharger
- Type
- Twin-scroll turbo
- Boost Pressure
- 1.2 bar
- Turbo Part Number
- 11 62 8 617 789
- Wastegate Actuator Part Number
- 11 62 8 617 456
- intercooler Part Number
- 17 11 8 617 678
Valvetrain
- Valve Configuration
- DOHC, 16 valves
- Valve Timing
- Double VANOS (variable valve timing)
- Valve Clearance
- Hydraulic, self-adjusting
- Camshaft Part Number
- 11 36 8 617 123
- Valve Spring Part Number
- 11 36 8 617 456
Maintenance
- Timing Chain Interval
- Lifetime (no scheduled replacement)
- Belt Drive
- No timing belt (chain-driven)
- Accessory Belt Part Number
- 11 28 8 617 789
- Belt Tensioner Part Number
- 11 28 8 617 345
- Service interval
- Condition Based Service (CBS)
Diagnostics
- OBD interface
- ISO 15765-4 CAN
- Fault Code Reading
- ISTA/D or compatible scan tool
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Connector Location
- Under dashboard, driver's side
- Software Version
- ISTA 4.39.2 or later
Service Information Service
Detailed service requirements and schedules for the 2.0L B48 engine
- Engine oil and filter change
- Inspect air filter
- Check coolant level and condition
- Inspect spark plugs
- Check turbocharger system for leaks
Use only BMW-approved fluids and parts
- Replace cabin air filter
- Inspect fuel system
- Check ignition system
- Inspect engine mounts
- Check turbocharger actuator function
Perform additional checks if vehicle is driven in severe conditions
- Replace spark plugs
- Inspect timing chain and guides
- Check valve clearance (hydraulic, no adjustment needed)
- Replace engine air filter
- Inspect cooling system hoses and connections
Timing chain inspection is visual only, no replacement unless wear is detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2022-Present BMW X1?
What is the horsepower and torque output of the 2.0L engine in the 2022-Present BMW X1?
The 2.0L turbocharged inline-4 engine in the 2022-Present BMW X1 produces 241 horsepower at 4,500-6,500 rpm and 295 lb-ft of torque at 1,500-4,000 rpm. These figures may vary slightly depending on the specific trim and market.
Q2 What type of fuel system does the 2.0L engine use?
What type of fuel system does the 2.0L engine use?
The 2.0L engine in the BMW X1 utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance. It is designed to work with premium unleaded gasoline (91 octane or higher).
Q3 What is the recommended oil type and capacity for the 2.0L engine?
What is the recommended oil type and capacity for the 2.0L engine?
The 2.0L engine requires synthetic motor oil meeting BMW Longlife-01 FE specification. The oil capacity is approximately 5.2 liters (5.5 quarts). Always refer to the owner's manual or service documentation for exact specifications.
Q4 What is the engine displacement and compression ratio of the 2.0L engine?
What is the engine displacement and compression ratio of the 2.0L engine?
The 2.0L engine has a displacement of 1,998 cc (2.0 liters) and a compression ratio of 10.2:1. This design balances performance and fuel efficiency.
Q5 Does the 2.0L engine feature start-stop technology?
Does the 2.0L engine feature start-stop technology?
Yes, the 2.0L engine in the BMW X1 is equipped with BMW EfficientDynamics start-stop technology, which automatically shuts off the engine when the vehicle is stationary to reduce fuel consumption and emissions.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X1 Owner's Manual
Coming SoonThe official owner's manual for the 2022-Present BMW X1, containing detailed information on the 2.0L engine, maintenance schedules, and operational guidelines.
BMW Technical Service Bulletins
Coming SoonAccess the latest technical service bulletins (TSBs) for the 2.0L engine, including updates, recalls, and recommended service procedures.
BMW Genuine Parts Catalog
Coming SoonExplore the official catalog of genuine BMW parts for the 2.0L engine, ensuring compatibility and optimal performance.
BMW Service and Maintenance Guide
Coming SoonA comprehensive guide to servicing the 2.0L engine, including recommended intervals, procedures, and safety precautions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.