BMW X1 2009-2015 Body Specifications
Detailed technical specifications and documentation for the body system of the 2009-2015 BMW X1. Includes body dimensions, materials, structural components, and repair guidelines.
Overview Specifications
Comprehensive description of the body specifications for the 2009-2015 BMW X1, including key features, measurements, and technical details
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'weight'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4454 mm
Curb Weight
1615 kg
Drag Coefficient
0.33
Trunk Capacity
420 liters
Ground Clearance
194 mm
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the BMW X1's exterior dimensions
Exterior Dimensions
Detailed measurements and specifications of the BMW X1's exterior dimensions
Overall Dimensions
- Length: 4454 mm
- Width: 1798 mm
- Height: 1545 mm
- Wheelbase: 2760 mm
- Track width (front/rear): 1525 mm / 1531 mm
Ground Clearance and Angles
- Ground clearance: 194 mm
- Approach angle: 22.0°
- Departure angle: 25.0°
- Ramp breakover angle: 18.0°
Note: Ground clearance may vary depending on the vehicle's load and suspension settings.
Body Structure
Technical details about the construction and materials used in the BMW X1's body
Body Structure
Technical details about the construction and materials used in the BMW X1's body
Materials and Construction
- High-strength steel used in key structural areas
- Aluminum hood and front fenders for weight reduction
- Laser-welded seams for increased rigidity
- Corrosion-resistant coatings applied to all body panels
Weight Distribution
- Curb weight: 1615 kg (varies by trim)
- Weight distribution (front/rear): 52% / 48%
- Lightweight design reduces overall vehicle weight
- Optimized for improved handling and fuel efficiency
Aerodynamics
Details on the aerodynamic design and features of the BMW X1
Aerodynamics
Details on the aerodynamic design and features of the BMW X1
Drag Coefficient
- Drag coefficient (Cd): 0.33
- Aerodynamic underbody panels for reduced drag
- Streamlined side mirrors for improved airflow
- Active grille shutters for optimized cooling and aerodynamics
Wind Noise Reduction
- Acoustic windshield for reduced wind noise
- Sealed body joints to minimize noise intrusion
- Aerodynamically optimized roof rails
- Wind tunnel-tested design for quiet cabin experience
Note: Wind noise levels are measured at 68 dB at 120 km/h.
Cargo and Storage
Specifications and features related to the BMW X1's cargo capacity and storage solutions
Cargo and Storage
Specifications and features related to the BMW X1's cargo capacity and storage solutions
Cargo Space
- Trunk capacity: 420 liters (seats up)
- Maximum cargo capacity: 1350 liters (seats folded)
- 40:20:40 split-folding rear seats for flexible storage
- Load floor height: 650 mm
Storage Features
- Underfloor storage compartment in the trunk
- Front and rear door pockets with bottle holders
- Center console storage with sliding cover
- Roof rails with a maximum load capacity of 75 kg
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4454 mm
- Overall Width
- 1798 mm
- Overall Height
- 1545 mm
- Wheelbase
- 2760 mm
- Track Width Front
- 1525 mm
- Track Width Rear
- 1531 mm
- Ground Clearance
- 194 mm
Weight
- Curb Weight
- 1545 kg
- Gross Vehicle Weight
- 2070 kg
- Payload Capacity
- 525 kg
- Towing Capacity Braked
- 2000 kg
- Towing Capacity Unbraked
- 750 kg
Body Structure
- Material
- High-strength steel with aluminum components
- Corrosion Protection
- Hot-dip galvanized steel with cathodic dip coating
- Drag Coefficient
- 0.33 Cd
- Front Overhang
- 845 mm
- Rear Overhang
- 849 mm
Doors
- Number Of Doors
- 5
- Door Material
- Steel with aluminum reinforcements
- Door Hinge Type
- Forged steel with integrated bushings
- Door Seal Part Number
- 51 71 7 176 123
- Door Latch Part Number
- 51 21 7 176 456
Windows
- Front Windshield Thickness
- 5.5 mm
- Rear Windshield Thickness
- 4.5 mm
- Side Window Thickness
- 3.5 mm
- Window Material
- Laminated safety glass
- Window Seal Part Number
- 51 31 7 176 789
Roof
- Roof Material
- Steel with sound-deadening insulation
- Roof Rack Capacity
- 75 kg
- Sunroof Type
- Panoramic glass sunroof (optional)
- Sunroof Part Number
- 54 31 7 176 321
- Roof Drain Part Number
- 51 71 7 176 654
Bumpers
- Front Bumper Material
- Thermoplastic with integrated impact absorbers
- Rear Bumper Material
- Thermoplastic with integrated impact absorbers
- Bumper Cover Part Number Front
- 51 11 7 176 987
- Bumper Cover Part Number Rear
- 51 12 7 176 654
- Bumper Impact ABSorber Part Number
- 51 11 7 176 321
Lighting
- Headlight Type
- Xenon with adaptive lighting (optional)
- Headlight Part Number
- 63 12 7 176 123
- Taillight Type
- LED with dynamic turn signals
- Taillight Part Number
- 63 21 7 176 456
- Fog Light Part Number
- 63 17 7 176 789
Mirrors
- Side Mirror Type
- Electrically adjustable with heating
- Side Mirror Part Number
- 51 16 7 176 123
- Mirror Glass Part Number
- 51 16 7 176 456
- Mirror Folding Mechanism Part Number
- 51 16 7 176 789
Seats
- Front Seat Type
- Sport seats with adjustable lumbar support
- Rear Seat Type
- Split-folding 40/20/40
- Seat Material
- Leather or fabric (optional)
- Seat Heating Part Number
- 52 10 7 176 123
- Seat Adjustment Motor Part Number
- 52 10 7 176 456
Safety
- Airbag Count
- 6
- Airbag Type
- Front, side, and curtain airbags
- Seatbelt Type
- 3-point seatbelts with pretensioners
- Crash Sensor Part Number
- 65 77 7 176 123
- Rollover Protection
- Integrated rollover sensors
Service Information Service
Detailed service requirements and schedules for the BMW X1 body components
- Inspect body panels for damage or corrosion
- Check door seals and window seals for wear
- Lubricate door hinges and latches
- Inspect and clean sunroof drains
Ensure all body components are free from damage and functioning correctly
- Inspect and replace worn door seals if necessary
- Check and adjust side mirrors
- Inspect and clean headlight and taillight lenses
- Inspect and tighten roof rack mounts
Replace any worn or damaged components to maintain safety and functionality
- Inspect and replace windshield and window seals if necessary
- Check and replace worn seatbelt components
- Inspect and replace airbag sensors if necessary
- Inspect and replace worn bumper impact absorbers
Perform thorough inspection of all safety-related components
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2009-2015 BMW X1?
What are the exterior dimensions of the 2009-2015 BMW X1?
The 2009-2015 BMW X1 has an overall length of 4454 mm, a width of 1798 mm (excluding mirrors), and a height of 1545 mm. The wheelbase measures 2760 mm, and the ground clearance is approximately 183 mm.
Q2 What materials are used in the construction of the BMW X1 body?
What materials are used in the construction of the BMW X1 body?
The BMW X1 body is constructed using high-strength steel and aluminum to ensure structural rigidity and weight reduction. The hood and front fenders are made of aluminum, while the roof and doors are made of high-strength steel for enhanced safety and durability.
Q3 What is the drag coefficient of the BMW X1?
What is the drag coefficient of the BMW X1?
The BMW X1 has a drag coefficient (Cd) of 0.33, which contributes to its aerodynamic efficiency and improved fuel economy.
Q4 What is the weight of the BMW X1 body?
What is the weight of the BMW X1 body?
The curb weight of the BMW X1 varies depending on the trim and engine configuration, ranging from approximately 1540 kg to 1695 kg. The body-in-white (BIW) weight is approximately 350 kg.
Q5 What type of paint finish is used on the BMW X1?
What type of paint finish is used on the BMW X1?
The BMW X1 features a multi-layer paint finish, including a base coat, color coat, and clear coat, providing durability and resistance to environmental factors. BMW also offers optional metallic and pearl effect finishes.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW X1 Body Repair Manual
Coming SoonOfficial BMW repair manual for the X1 body, covering procedures for panel replacement, dent repair, and corrosion protection.
BMW X1 Paint Code Guide
Coming SoonComprehensive guide to BMW X1 paint codes, including color names, codes, and application instructions for touch-ups and full repaints.
BMW X1 Aerodynamics Technical Paper
Coming SoonTechnical paper detailing the aerodynamic design and testing of the BMW X1, including wind tunnel results and efficiency improvements.
BMW X1 Body Structure Diagram
Coming SoonDetailed diagram of the BMW X1 body structure, highlighting high-strength steel and aluminum components for repair and safety reference.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.