BMW M6 2012-2018 Body Specifications
Detailed technical specifications and documentation for the body system of the 2012-2018 BMW M6, covering structural design, materials, aerodynamics, and safety features.
Overview Specifications
Comprehensive description of the body specifications for the 2012-2018 BMW M6, including key features, measurements, and technical details
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4891 mm (192.6 in)
Curb Weight
1855 kg (4090 lbs)
Drag Coefficient
0.33
Wheelbase
2851 mm (112.2 in)
Active Rear Spoiler Downforce
Up to 100 kg (220 lbs)
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the BMW M6's exterior dimensions, including length, width, height, and wheelbase.
Exterior Dimensions
Detailed measurements and specifications of the BMW M6's exterior dimensions, including length, width, height, and wheelbase.
Overall Dimensions
- Length: 4891 mm (192.6 in)
- Width: 1899 mm (74.8 in)
- Height: 1369 mm (53.9 in)
- Wheelbase: 2851 mm (112.2 in)
- Track width (front/rear): 1620 mm / 1602 mm (63.8 in / 63.1 in)
Ground Clearance and Weight
- Ground clearance: 120 mm (4.7 in)
- Curb weight: 1855 kg (4090 lbs)
- Gross vehicle weight: 2290 kg (5049 lbs)
- Weight distribution (front/rear): 52.5% / 47.5%
Note: Weight distribution is optimized for balanced handling and performance.
Body Materials and Construction
Information on the materials and construction techniques used in the BMW M6's body, including lightweight components and structural integrity.
Body Materials and Construction
Information on the materials and construction techniques used in the BMW M6's body, including lightweight components and structural integrity.
Material Composition
- Aluminum hood and doors for weight reduction
- Carbon fiber reinforced plastic (CFRP) roof
- High-strength steel used in the chassis
- Magnesium alloy in select structural components
Structural Features
- Aerodynamically optimized body design
- Integrated air ducts for brake cooling
- Active rear spoiler for improved downforce
- Reinforced front and rear subframes
Note: The CFRP roof reduces weight and lowers the center of gravity for enhanced handling.
Aerodynamics
Details on the aerodynamic design of the BMW M6, including drag coefficient, downforce, and airflow management.
Aerodynamics
Details on the aerodynamic design of the BMW M6, including drag coefficient, downforce, and airflow management.
Drag Coefficient
- Drag coefficient (Cd): 0.33
- Frontal area: 2.25 m² (24.2 ft²)
- Optimized underbody airflow management
- Active air flaps in the front grille
Downforce and Airflow
- Active rear spoiler generates up to 100 kg (220 lbs) of downforce at high speeds
- Air curtains reduce turbulence around the front wheels
- Rear diffuser enhances stability at high speeds
- Side skirts direct airflow for reduced drag
Note: The active rear spoiler adjusts automatically based on speed and driving conditions.
Exterior Features
Overview of the exterior features and design elements of the BMW M6, including lighting, mirrors, and styling.
Exterior Features
Overview of the exterior features and design elements of the BMW M6, including lighting, mirrors, and styling.
Lighting and Mirrors
- Adaptive LED headlights with high-beam assist
- LED taillights with dynamic turn signals
- Electrically adjustable and heated side mirrors
- Automatic dimming rearview mirror
Styling and Design
- M-specific front and rear bumpers
- Quad exhaust system with chrome tips
- 19-inch or optional 20-inch M light-alloy wheels
- Available in a range of exterior colors including Alpine White, Sapphire Black, and San Marino Blue
Note: The M-specific design elements emphasize the vehicle's sporty and aggressive character.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4894 mm
- Overall Width
- 1899 mm
- Overall Height
- 1369 mm
- Wheelbase
- 2857 mm
- Track Width Front
- 1617 mm
- Track Width Rear
- 1627 mm
- Curb Weight
- 1855 kg
Body Materials
- Roof
- Carbon fiber reinforced plastic (CFRP)
- Hood
- Aluminum
- Doors
- Aluminum with CFRP reinforcement
- Trunk Lid
- Aluminum
- Chassis
- High-strength steel with aluminum components
Aerodynamics
- Drag Coefficient
- 0.33 Cd
- Front Air Dam
- Active air flaps
- Rear Spoiler
- Active rear spoiler
- Underbody
- Full underbody paneling for reduced drag
Exterior Lighting
- Headlights
- Adaptive LED headlights
- Part Number Headlights
- 63117365489
- Taillights
- LED taillights with dynamic turn signals
- Part Number Taillights
- 63217365490
- Fog Lights
- LED fog lights
- Part Number Fog Lights
- 63317365491
Windows
- Front Windshield
- Laminated glass with UV protection
- Side Windows
- Tempered glass with acoustic insulation
- Rear Windshield
- Heated glass with defroster
- Sunroof
- Panoramic glass sunroof with power operation
Mirrors
- Side Mirrors
- Electrically adjustable, heated, and auto-dimming
- Part Number Side Mirrors
- 51167365492
- Rearview Mirror
- Auto-dimming with compass display
- Part Number Rearview Mirror
- 51167365493
Doors
- Door Type
- Frameless doors
- Door Handles
- Flush-mounted, electrically operated
- Part Number Door Handles
- 51217365494
- Door Locks
- Central locking system with keyless entry
Trunk
- Trunk Capacity
- 460 liters
- Trunk Opening
- Wide aperture for easy loading
- Trunk Mechanism
- Power-operated trunk lid
- Part Number Trunk Mechanism
- 41627365495
Paint
- Paint Type
- Metallic or matte finish
- Paint Thickness
- 120-150 microns
- Clear Coat
- UV-resistant clear coat
- Corrosion Warranty
- 12 years/unlimited miles
Safety Features
- Airbags
- Front Airbags: Dual-stage front airbagsSide Airbags: Side-impact airbagsCurtain Airbags: Head protection system
- Crumple Zones
- Front and rear crumple zones
- Rollover Protection
- Automatic rollover protection system
- Safety Cell
- High-strength passenger cell
Service Information Service
Detailed service requirements and schedules for the BMW M6 body components
- Inspect and clean exterior lighting
- Check and lubricate door hinges and locks
- Inspect windshield wipers and replace if necessary
- Check and adjust sunroof operation
Ensure all body components are functioning correctly and free from damage
- Inspect and clean underbody panels
- Check and tighten all exterior fasteners
- Inspect and clean active aerodynamics components
- Check and replace any damaged exterior trim
Pay special attention to aerodynamic components and underbody panels
- Inspect and replace door seals if necessary
- Check and adjust trunk lid mechanism
- Inspect and clean side mirrors and rearview mirror
- Check and replace any damaged exterior lighting components
Ensure all seals and mechanisms are in good condition to prevent water ingress
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the body dimensions of the 2012-2018 BMW M6?
What are the body dimensions of the 2012-2018 BMW M6?
The 2012-2018 BMW M6 has a length of 4891 mm, a width of 1899 mm, and a height of 1369 mm. The wheelbase measures 2851 mm, and the curb weight ranges from 1850 kg to 1925 kg depending on the configuration.
Q2 What materials are used in the construction of the BMW M6 body?
What materials are used in the construction of the BMW M6 body?
The BMW M6 body utilizes a combination of lightweight materials, including high-strength steel, aluminum, and carbon fiber-reinforced plastic (CFRP). The roof is made of CFRP to reduce weight and lower the center of gravity.
Q3 What is the drag coefficient of the BMW M6?
What is the drag coefficient of the BMW M6?
The BMW M6 has a drag coefficient (Cd) of 0.32, which contributes to its aerodynamic efficiency and high-speed stability.
Q4 Are there any specific maintenance requirements for the CFRP components?
Are there any specific maintenance requirements for the CFRP components?
CFRP components, such as the roof, require careful handling and specific maintenance procedures. Avoid using abrasive cleaners or tools that could damage the surface. Always refer to the official BMW service manual for detailed care instructions.
Q5 What is the ground clearance of the BMW M6?
What is the ground clearance of the BMW M6?
The ground clearance of the BMW M6 is approximately 120 mm, which is optimized for performance driving while maintaining practicality for everyday use.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M6 Body Repair Manual
Coming SoonOfficial repair manual for the BMW M6 body, including detailed procedures for repairing and replacing body components.
CFRP Care and Maintenance Guide
Coming SoonComprehensive guide on maintaining and caring for carbon fiber-reinforced plastic components in the BMW M6.
Aerodynamics and Body Design Overview
Coming SoonTechnical overview of the aerodynamic design principles and body construction of the BMW M6.
BMW M6 Body Specifications Sheet
Coming SoonDetailed specifications sheet for the BMW M6 body, including dimensions, materials, and weight distribution.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.