BMW M5 2018-present 4.4L Engine Specifications
Detailed technical specifications for the 4.4L V8 TwinPower Turbo engine in the 2018-Present BMW M5. Includes performance metrics, system details, and maintenance guidelines for the S63B44T4 engine.
Overview Specifications
Comprehensive description of the 4.4l-engine specifications for the 2018-Present BMW M5, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 4.4l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 4.4l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Engine Type
4.4L V8 TwinPower Turbo
Power Output
600 hp (447 kW)
Torque
553 lb-ft (750 Nm)
Compression Ratio
10.5:1
Fuel Consumption
10.5 L/100 km (22.4 mpg)
Available Specifications
Engine Design and Architecture
Detailed information on the design, architecture, and key components of the 4.4l-engine
Engine Design and Architecture
Detailed information on the design, architecture, and key components of the 4.4l-engine
Engine Configuration
- V8 configuration with 90-degree bank angle
- TwinPower Turbo technology with two turbochargers
- Direct fuel injection system for optimal efficiency
- Aluminum alloy engine block and cylinder heads
- DOHC (Double Overhead Camshaft) design
Displacement and Compression
- Displacement: 4.4 liters (4395 cc)
- Compression ratio: 10.5:1
- Bore: 89.0 mm
- Stroke: 88.3 mm
- Cylinder spacing: 98.0 mm
Note: The high compression ratio enhances combustion efficiency and power output.
Performance Specifications
Detailed performance metrics and capabilities of the 4.4l-engine
Performance Specifications
Detailed performance metrics and capabilities of the 4.4l-engine
Power and Torque
- Maximum power output: 600 hp (447 kW) at 5600-6700 rpm
- Peak torque: 553 lb-ft (750 Nm) at 1800-5600 rpm
- Redline: 7200 rpm
- 0-60 mph acceleration: 3.2 seconds
- Top speed: 155 mph (electronically limited), optional 190 mph with M Driver's Package
Fuel Efficiency and Emissions
- Fuel consumption (combined): 10.5 L/100 km (22.4 mpg)
- CO2 emissions: 241 g/km
- Complies with Euro 6 emissions standards
- Start-stop technology for improved fuel efficiency
- Regenerative braking system
Note: The engine features advanced technologies to balance performance and environmental compliance.
Cooling and Lubrication Systems
Details on the cooling and lubrication systems that ensure optimal engine performance
Cooling and Lubrication Systems
Details on the cooling and lubrication systems that ensure optimal engine performance
Cooling System
- Liquid-cooled system with dual radiators
- Electric water pump for precise temperature control
- Oil cooler integrated into the cooling system
- Thermostatically controlled cooling for optimal thermal management
- Coolant capacity: 12.5 liters
Lubrication System
- Dry-sump lubrication system for high-performance operation
- Oil capacity: 9.5 liters
- High-pressure oil pump for consistent lubrication
- Oil filter with replaceable cartridge
- Oil grade recommendation: SAE 0W-30 or 5W-30
Note: The dry-sump system ensures reliable lubrication during high-speed cornering and acceleration.
Electrical and Control Systems
Information on the electrical and control systems that manage engine operation
Electrical and Control Systems
Information on the electrical and control systems that manage engine operation
Engine Management System
- Bosch MEVD17.2.6 engine control unit (ECU)
- Adaptive throttle response for dynamic driving modes
- Integrated knock control system for optimized combustion
- Real-time monitoring of engine parameters
- Compatible with BMW's ConnectedDrive services
Ignition and Fuel Systems
- Direct ignition system with individual coil-on-plug design
- High-pressure fuel injection system (up to 350 bar)
- Multi-point fuel injection for precise fuel delivery
- Spark plug type: Bosch ZR5TPP33
- Fuel tank capacity: 68 liters
Note: The high-pressure fuel injection system ensures efficient combustion and reduced emissions.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- S63B44T4
- Displacement
- 4.4 liters
- Configuration
- V8
- Cylinder Bore
- 89.0 mm
- Piston Stroke
- 88.3 mm
- Compression Ratio
- 10.5:1
- Engine Weight
- 204 kg
- Manufacturer
- BMW M GmbH
Performance
- Max Power
- 617 hp @ 6000 rpm
- Max Torque
- 750 Nm @ 1800-5600 rpm
- Redline
- 7200 rpm
- Acceleration 0-60 Mph
- 3.2 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- Fuel Type
- Premium unleaded gasoline
- Fuel injection
- Direct injection
- injection Pressure
- 200 bar
- Fuel Tank Capacity
- 68 liters
- Fuel Consumption City
- 14.8 l/100 km
- Fuel Consumption Highway
- 9.2 l/100 km
Turbocharging
- Turbo Type
- Twin-scroll twin-turbo
- Boost Pressure
- 1.2 bar
- intercooler Type
- Air-to-water
- Turbo Response Time
- 0.8 seconds
Cooling System
- Coolant Capacity
- 12.5 liters
- Coolant Type
- BMW Antifreeze/Coolant
- Thermostat Opening Temperature
- 97°C
- Radiator Capacity
- 5.5 liters
Lubrication System
- Oil Capacity
- 9.5 liters
- Oil Type
- BMW TwinPower Turbo 5W-30
- Oil Change interval
- 10,000 miles or 12 months
- Oil Pump Type
- Variable displacement
Ignition System
- Ignition Type
- Coil-on-plug
- Spark Plug Gap
- 0.8 mm
- Spark Plug Torque
- 25 Nm
- Spark Plug Part Number
- 12120039626
Emissions
- Emission Standard
- EU6
- Catalytic Converter Type
- Close-coupled
- Particulate Filter
- Yes
- Exhaust System Material
- Stainless steel
Maintenance
- Valve Clearance Check interval
- 60,000 miles
- Timing Chain Replacement Interval
- Lifetime (no scheduled replacement)
- Belt Drive Replacement interval
- 60,000 miles
- Air Filter Replacement interval
- 30,000 miles
Diagnostics
- Onboard Diagnostic System
- OBD-II
- Diagnostic Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tool Compatibility
- BMW ISTA/D
Service Information Service
Detailed service requirements and schedules for the 4.4l-engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect tires and adjust pressure
Use only BMW-approved fluids and parts
- Replace air filter
- Replace cabin air filter
- Inspect fuel system
- Check spark plugs
Inspect for any signs of wear or damage
- Replace drive belts
- Inspect timing chain
- Check valve clearance
- Replace transmission fluid
Perform thorough engine inspection
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 4.4L V8 engine in the 2018-Present BMW M5?
What is the horsepower and torque output of the 4.4L V8 engine in the 2018-Present BMW M5?
The 4.4L V8 twin-turbocharged engine in the BMW M5 produces 600 horsepower at 5,600-6,700 RPM and 553 lb-ft of torque between 1,800-5,600 RPM. In the Competition trim, output increases to 617 horsepower and 553 lb-ft of torque.
Q2 What type of fuel system does the 4.4L engine use?
What type of fuel system does the 4.4L engine use?
The 4.4L engine utilizes a high-precision direct fuel injection system with piezo injectors, operating at a maximum pressure of 200 bar (2,900 psi). This ensures optimal fuel atomization and combustion efficiency.
Q3 What is the recommended oil type and capacity for the 4.4L engine?
What is the recommended oil type and capacity for the 4.4L engine?
BMW recommends using SAE 0W-30 or 5W-30 synthetic oil that meets BMW Longlife-01 or Longlife-01 FE specifications. The oil capacity is approximately 9.5 liters (10 quarts), including the oil filter.
Q4 What is the compression ratio of the 4.4L engine?
What is the compression ratio of the 4.4L engine?
The 4.4L V8 engine has a compression ratio of 10.5:1, optimized for performance and efficiency with twin-turbocharging.
Q5 What is the service interval for the 4.4L engine?
What is the service interval for the 4.4L engine?
BMW recommends an oil service interval of approximately 10,000 miles or 12 months, whichever comes first. Additional service intervals, such as spark plug replacement, are recommended every 30,000 miles.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M5 4.4L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 4.4L V8 engine, including performance metrics, dimensions, and system details.
BMW M5 Maintenance Schedule
Coming SoonOfficial maintenance schedule for the 2018-Present BMW M5, including service intervals and recommended procedures.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog for the 4.4L engine, including recommended replacement parts and accessories.
BMW M5 Owner's Manual
Coming SoonDownload the official owner's manual for the 2018-Present BMW M5, covering operation, maintenance, and troubleshooting.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.