BMW M5 2011-2017 Getrag Transmission Specifications
Comprehensive technical specifications and service details for the Getrag 7-speed dual-clutch transmission (DCT) used in the 2011-2017 BMW M5 (F10). This document covers transmission design, torque capacity, gear ratios, fluid specifications, maintenance procedures, and diagnostic codes specific to the Getrag DCT system.
Overview Specifications
Comprehensive description of the Getrag 7-speed dual-clutch transmission (DCT) specifications for the 2011-2017 BMW M5, including key features, measurements, and technical details.
How to Use
Use the search function to locate specific Getrag transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections: General Specifications, Gear Ratios, Torque Capacity, and Maintenance.
Key Specifications
Transmission Type
7-speed DCT
Torque Capacity
700 Nm (516 lb-ft)
Fluid Capacity
7.5 liters
Weight
98 kg
Final Drive Ratio
3.154:1
Available Specifications
General Specifications
This section covers the overall design and key features of the Getrag 7-speed DCT used in the 2011-2017 BMW M5.
General Specifications
This section covers the overall design and key features of the Getrag 7-speed DCT used in the 2011-2017 BMW M5.
Transmission Type and Design
- 7-speed dual-clutch transmission (DCT)
- Wet clutch system for improved durability
- Electronically controlled shift mechanism
- Integrated oil cooling system for thermal management
Dimensions and Weight
- Overall length: 720 mm
- Width: 580 mm
- Height: 380 mm
- Weight: 98 kg (including fluid)
Note: Dimensions and weight may vary slightly depending on installation configuration.
Gear Ratios
Detailed gear ratios for the Getrag 7-speed DCT, including final drive ratio and reverse gear.
Gear Ratios
Detailed gear ratios for the Getrag 7-speed DCT, including final drive ratio and reverse gear.
Forward Gear Ratios
- 1st gear: 4.806:1
- 2nd gear: 2.593:1
- 3rd gear: 1.701:1
- 4th gear: 1.277:1
- 5th gear: 1.000:1
- 6th gear: 0.844:1
- 7th gear: 0.671:1
Final Drive and Reverse
- Final drive ratio: 3.154:1
- Reverse gear ratio: 3.939:1
Torque Capacity
This section provides details on the torque handling capabilities of the Getrag 7-speed DCT.
Torque Capacity
This section provides details on the torque handling capabilities of the Getrag 7-speed DCT.
Maximum Torque Handling
- Rated torque capacity: 700 Nm (516 lb-ft)
- Peak torque capacity: 750 Nm (553 lb-ft)
- Designed for high-performance applications
- Optimized for the BMW S63 4.4L V8 engine
Clutch Specifications
- Dual wet clutch system
- Clutch diameter: 240 mm
- Clutch material: High-friction sintered metal
- Hydraulic actuation system
Note: Clutch wear depends on driving conditions and maintenance.
Maintenance
Guidelines for maintaining the Getrag 7-speed DCT, including fluid specifications and service intervals.
Maintenance
Guidelines for maintaining the Getrag 7-speed DCT, including fluid specifications and service intervals.
Transmission Fluid
- Recommended fluid: BMW DCTF-1
- Fluid capacity: 7.5 liters
- Fluid change interval: 60,000 miles or 5 years
- Fluid operating temperature range: -40°C to 150°C
Service Intervals
- Inspect transmission every 30,000 miles
- Replace clutch packs as needed (typically 100,000 miles)
- Check for software updates during routine service
- Monitor for abnormal noises or shifting behavior
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 7-speed dual-clutch automatic (DCT)
- Model
- Getrag GS7D36SG
- Part Number
- 28107848801
- Manufacturer
- Getrag
- Application
- 2011-2017 BMW M5 (F10)
Dimensions And Weight
- Length
- 720 mm
- Width
- 580 mm
- Height
- 420 mm
- Weight
- 120 kg
- Fluid Capacity
- 7.5 liters
Performance Specifications
- Maximum Torque
- 700 Nm
- Maximum Power
- 560 hp
- Shift Time
- 100 ms
- Gear Ratios
- 1st: 4.806:12nd: 2.593:13rd: 1.701:14th: 1.277:15th: 1.000:16th: 0.839:17th: 0.667:1Reverse: 3.727:1
Fluid Specifications
- Type
- BMW DCTF-1 (Dual Clutch Transmission Fluid)
- Part Number
- 83222447588
- Viscosity
- 7.4 cSt at 100°C
- Operating Temperature Range
- -40°C to 150°C
- Change interval
- Every 60,000 miles or 48 months
Clutch System
- Type
- Dual wet multi-plate clutch
- Clutch Pack Diameter
- 240 mm
- Clutch Plate Thickness
- 1.5 mm
- Clutch Fluid Type
- BMW DCTF-1
- Clutch Fluid Capacity
- 1.2 liters
Electronic Control
- Control Module
- EGS (Electronic Transmission Control)
- Part Number
- 7593537
- Sensors
-
- Input speed sensor
- Output speed sensor
- Temperature sensor
- Pressure sensor
- Communication Protocol
- CAN bus
Operational Parameters
- Maximum input Speed
- 8000 rpm
- Maximum Output Speed
- 7500 rpm
- Operating Pressure
- 20 bar
- Temperature Warning Threshold
- 140°C
- Temperature Shutdown Threshold
- 160°C
Maintenance Specifications
- Fluid Change interval
- 60,000 miles or 48 months
- Filter Change interval
- 60,000 miles or 48 months
- Filter Part Number
- 24118616027
- Seal inspection Interval
- Every 30,000 miles
- Clutch Wear inspection Interval
- Every 30,000 miles
Diagnostic Specifications
- Diagnostic Tool
- BMW ISTA/D
- Fault Codes
-
- P0700 - Transmission Control System Malfunction
- P0715 - Input/Turbine Speed Sensor Circuit Malfunction
- P0720 - Output Speed Sensor Circuit Malfunction
- P0730 - Incorrect Gear Ratio
- P0741 - Torque Converter Clutch Circuit Performance or Stuck Off
- Diagnostic Procedure
- Use ISTA/D to read fault codes and perform system tests
Safety information
- Warning
- Always use BMW-approved fluids and parts to avoid damage to the transmission
- Precautions
-
- Ensure the vehicle is on a level surface before performing any maintenance
- Use proper lifting equipment to support the vehicle
- Allow the transmission to cool before performing fluid changes
Service Information Service
Detailed service requirements and schedules for the Getrag 7-speed DCT transmission
- Inspect clutch wear
- Check transmission fluid level
- Inspect seals for leaks
Perform visual inspection and top-up fluid if necessary
- Replace transmission fluid
- Replace transmission filter
- Perform full diagnostic scan
Use only BMW-approved DCTF-1 fluid and OEM filter
Common Questions
Find answers to common questions about torque specifications
Q1 What type of transmission is used in the 2011-2017 BMW M5?
What type of transmission is used in the 2011-2017 BMW M5?
The 2011-2017 BMW M5 is equipped with a 7-speed Getrag M DCT dual-clutch transmission (model GS7D36SG). This transmission is designed for high-performance applications, offering rapid gear shifts and improved efficiency. It supports a maximum torque of 600 Nm and is paired with BMW's Drivelogic system for customizable shift characteristics.
Q2 What is the recommended transmission fluid for the Getrag M DCT transmission?
What is the recommended transmission fluid for the Getrag M DCT transmission?
BMW recommends using genuine BMW DCTF-1 transmission fluid (part number 83 22 2 352 814) for the Getrag M DCT transmission. The fluid capacity is approximately 7.5 liters, and it is crucial to use the specified fluid to ensure optimal performance and longevity of the transmission.
Q3 How often should the transmission fluid be changed in the Getrag M DCT?
How often should the transmission fluid be changed in the Getrag M DCT?
BMW does not specify a fixed interval for transmission fluid changes in the Getrag M DCT under normal driving conditions. However, for vehicles subjected to severe driving conditions (e.g., track use or frequent high-performance driving), it is recommended to inspect the fluid every 30,000 miles and replace it if necessary. Always consult the official service manual for your specific model year.
Q4 What is the procedure for resetting the transmission adaptation values?
What is the procedure for resetting the transmission adaptation values?
Resetting the transmission adaptation values requires the use of BMW's ISTA diagnostic software. The procedure involves connecting the vehicle to the diagnostic tool, navigating to the transmission control module, and selecting the 'Reset Adaptations' option. This process helps recalibrate the transmission for optimal performance, especially after fluid changes or component replacements.
Q5 Can the Getrag M DCT transmission handle aftermarket performance upgrades?
Can the Getrag M DCT transmission handle aftermarket performance upgrades?
The Getrag M DCT transmission is robust and can handle moderate performance upgrades. However, significant increases in torque (beyond 600 Nm) may require additional modifications, such as upgraded clutch packs or reinforced internals. Always consult with a BMW-certified technician or performance specialist before making modifications to ensure compatibility and avoid voiding the warranty.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M5 Getrag M DCT Technical Specifications
Coming SoonDetailed technical specifications for the Getrag M DCT transmission, including torque ratings, fluid capacities, and shift logic settings.
BMW DCTF-1 Transmission Fluid Guide
Coming SoonA comprehensive guide on the proper use and maintenance of BMW DCTF-1 transmission fluid for the Getrag M DCT.
BMW ISTA Diagnostic Software Overview
Coming SoonAn overview of BMW's ISTA diagnostic software, including its use for resetting transmission adaptations and performing advanced diagnostics.
BMW M5 Track Driving Maintenance Tips
Coming SoonMaintenance recommendations for BMW M5 vehicles used in track or high-performance driving conditions, including transmission care.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.