BMW M5 2005-2010

BMW M5 2005-2010 5.0L Engine Specifications

Detailed technical specifications and documentation for the 5.0L V10 S85 engine in the 2005-2010 BMW M5. Explore engine performance, component details, and maintenance guidelines for this high-performance engine.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the 5.0l-engine specifications for the 2005-2010 BMW M5, including key features, measurements, and technical details

How to Use

Use the search function to locate specific 5.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Engine Type

5.0L V10

Power Output

507 hp (373 kW) at 7750 rpm

Torque

384 lb-ft (520 Nm) at 6100 rpm

Compression Ratio

12.0:1

Redline

8250 rpm

Available Specifications

Engine Design and Architecture

Detailed information about the design and architecture of the 5.0l V10 engine used in the 2005-2010 BMW M5

Engine Configuration

V10 configuration with 90-degree bank angle
Aluminum block and cylinder heads for reduced weight
Double VANOS variable valve timing system
10 individual throttle bodies for precise air intake control

Displacement and Compression

Displacement: 4999 cc (5.0 liters)
Compression ratio: 12.0:1
Bore: 92.0 mm
Stroke: 75.2 mm

Note: The high compression ratio contributes to improved fuel efficiency and performance.

Performance Specifications

Technical details about the performance capabilities of the 5.0l V10 engine

Power and Torque

Maximum power output: 507 hp (373 kW) at 7750 rpm
Peak torque: 384 lb-ft (520 Nm) at 6100 rpm
Redline: 8250 rpm
Specific output: 101.4 hp per liter

Fuel Delivery and Ignition

Direct fuel injection system
High-pressure fuel pump with 50-120 bar pressure range
Individual coil-on-plug ignition system
Knock control system for optimized combustion

Cooling and Lubrication

Details about the cooling and lubrication systems of the 5.0l V10 engine

Cooling System

Dual-circuit cooling system with separate radiators
Electric water pump for precise temperature control
Coolant capacity: 12.5 liters
Thermostat opening temperature: 97°C (206.6°F)

Lubrication System

Dry sump lubrication system for high-performance operation
Oil capacity: 9.5 liters (including filter)
Oil pressure: 3.5-4.5 bar at operating temperature
Oil cooler integrated into the cooling system

Note: The dry sump system ensures consistent oil supply during high-speed cornering.

Emissions and Efficiency

Information about the emissions control and fuel efficiency of the 5.0l V10 engine

Emissions Control

Complies with Euro 4 emissions standards
Dual catalytic converters with lambda sensors
Secondary air injection system for reduced cold-start emissions
Exhaust gas recirculation (EGR) system

Fuel Efficiency

Combined fuel consumption: 14.8 L/100 km (15.9 mpg)
Urban fuel consumption: 21.4 L/100 km (11.0 mpg)
Extra-urban fuel consumption: 10.5 L/100 km (22.4 mpg)
CO2 emissions: 357 g/km

Search Specifications

Search by specification name, value, or description

Engine Specifications

General

Engine Code: S85B50

Displacement: 5.0 liters (4999 cc)

Configuration: V10

Cylinder Bore: 92.0 mm

Piston Stroke: 75.2 mm

Compression Ratio: 12.0:1

Engine Weight: 240 kg

Performance

Max Power: 507 hp @ 7750 rpm

Max Torque: 520 Nm @ 6100 rpm

Redline: 8250 rpm

Fuel Type: Premium unleaded (98 RON)

Fuel System: Electronic fuel injection (EFI)

Cooling System

Coolant Capacity: 12.5 liters

Thermostat Opening Temperature: 97°C

Radiator Cap Pressure: 1.4 bar

Coolant Type: BMW Antifreeze/Coolant (G48)

Lubrication System

Oil Capacity: 8.5 liters

Oil Type: BMW Longlife-01 5W-30

Oil Pressure: 3.5-4.5 bar @ 2000 rpm

Oil Filter Part Number: 11 42 7 566 327

Ignition System

Ignition Type: Coil-on-plug

Spark Plug Part Number: 12 12 0 037 103

Spark Plug Gap: 0.8 mm

Ignition Timing: 10° BTDC @ idle

Fuel injection

injector Type: High-pressure direct injection

Fuel Pressure: 5.0 bar (idle), 50-120 bar (operating)

injector Part Number: 13 53 7 566 328

Fuel Pump Part Number: 16 14 7 566 329

Valvetrain

Valve Configuration: DOHC, 4 valves per cylinder

Valve Material: Titanium intake, steel exhaust

Valve Clearance: Intake: 0.18-0.22 mm, Exhaust: 0.28-0.32 mm

Camshaft Part Number: 11 31 7 566 330

Exhaust System

Exhaust Manifold Material: Stainless steel

Catalytic Converter Part Number: 18 30 7 566 331

Exhaust Pipe Diameter: 70 mm

Emission Standard: EU4

Maintenance

Oil Change interval: 15,000 miles or 12 months

Spark Plug Replacement interval: 60,000 miles

Timing Chain Inspection Interval: 100,000 miles

Coolant Replacement interval: 4 years or 60,000 miles

Diagnostics

Obd2 Port Location: Under dashboard, driver's side

Common Fault Codes

P0171
P0300
P0420

Diagnostic Tool: BMW DIS/INPA or compatible OBD2 scanner

Sensor Tolerances: Oxygen Sensor: ±5%
Crankshaft Position Sensor: ±2°

Service Information Service

Detailed service requirements and schedules for the 5.0L V10 engine

15,000

Engine oil and filter change
Inspect cooling system for leaks
Check and top off all fluid levels

Use only BMW-approved fluids and parts

30,000

Inspect spark plugs
Check ignition system
Inspect fuel system components

Replace spark plugs if necessary

60,000

Replace spark plugs
Inspect timing chain and tensioners
Replace engine air filter

Timing chain inspection is critical for engine longevity

100,000

Inspect and replace timing chain if necessary
Replace coolant
Inspect and replace drive belts

Comprehensive engine inspection recommended

Common Questions

Find answers to common questions about torque specifications

What is the horsepower and torque output of the 5.0L V10 engine in the 2005-2010 BMW M5?

The 5.0L V10 S85 engine produces 500 horsepower at 7,750 rpm and 383 lb-ft of torque at 6,100 rpm. It features a high-revving design with a redline of 8,250 rpm.

What type of fuel system does the 5.0L V10 engine use?

The engine utilizes a multi-point fuel injection system with individual throttle bodies for each cylinder, ensuring precise air-fuel mixture delivery and optimal performance.

What is the recommended oil type and capacity for the 5.0L V10 engine?

BMW recommends using SAE 5W-30 synthetic oil with a capacity of approximately 9.5 liters (10 quarts). Always refer to the owner's manual for the exact specifications.

How often should the timing chain be inspected or replaced on the 5.0L V10 engine?

The timing chain is designed to last the lifetime of the engine under normal conditions. However, it should be inspected every 60,000 miles for wear or damage, especially in high-performance driving scenarios.

What is the compression ratio of the 5.0L V10 engine?

The compression ratio is 12.0:1, which contributes to the engine's high power output and efficiency.

Does the 5.0L V10 engine require premium fuel?

Yes, BMW specifies the use of premium unleaded fuel with an octane rating of 91 or higher to ensure optimal performance and prevent engine knocking.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW S85 V10 Engine Technical Overview

Coming Soon

A detailed technical breakdown of the S85 V10 engine, including specifications, design features, and performance metrics.

BMW M5 (E60) Service Manual

Coming Soon

The official service manual for the 2005-2010 BMW M5, covering maintenance procedures, troubleshooting, and repair guidelines.

High-Performance Engine Oil Guide

Coming Soon

A guide to selecting the right synthetic oil for high-performance engines like the S85 V10, including viscosity and additive recommendations.

BMW Genuine Parts Catalog

Coming Soon

Access the official BMW parts catalog to find genuine components for the 5.0L V10 engine and other systems.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.