BMW M4 2021-present HVAC Specifications
Detailed technical specifications and documentation for the HVAC system in the 2021-Present BMW M4. Includes system components, performance metrics, climate control features, and diagnostic procedures.
Overview Specifications
Comprehensive description of the HVAC specifications for the 2021-Present BMW M4, including key features, measurements, and technical details. This section provides detailed insights into the heating, ventilation, and air conditioning system, ensuring optimal performance and comfort.
How to Use
Use the search bar to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'.
Navigate through the HVAC documentation sections using the table of contents or by scrolling through the page. Each section is clearly labeled for easy access.
Key Specifications
Refrigerant Capacity
550 g
Heater Core Output
5.5 kW
Blower Motor Power
300 W
Cooling Capacity
7.2 kW
Airflow Capacity
650 CFM
Available Specifications
Climate Control System
This section covers the advanced climate control system of the BMW M4, including its dual-zone automatic temperature control and air distribution features.
Climate Control System
This section covers the advanced climate control system of the BMW M4, including its dual-zone automatic temperature control and air distribution features.
Dual-Zone Automatic Climate Control
- Independent temperature control for driver and front passenger
- Temperature range: 60°F to 84°F (15.5°C to 29°C)
- Automatic air recirculation with air quality sensor
- Microfilter system with activated charcoal for pollutant filtration
Air Distribution System
- Multi-level air vents for precise airflow direction
- Airflow capacity: Up to 650 cubic feet per minute (CFM)
- Automatic defrost and defog functions
- Rear seat ventilation ducts for passenger comfort
Note: The air distribution system is optimized for rapid cabin temperature adjustment.
Heating and Cooling Components
Detailed information on the heating and cooling components, including the heater core, evaporator, and refrigerant system.
Heating and Cooling Components
Detailed information on the heating and cooling components, including the heater core, evaporator, and refrigerant system.
Heater Core Specifications
- Heater core material: Aluminum
- Heat output: 5.5 kW at full capacity
- Coolant flow rate: 12 liters per minute (L/min)
- Integrated temperature control valve
Refrigerant System
- Refrigerant type: R1234yf
- Refrigerant capacity: 550 grams (g)
- Compressor type: Variable displacement
- Cooling capacity: 7.2 kW at maximum load
Note: The refrigerant system is designed for high efficiency and environmental compliance.
HVAC Electrical Components
This section provides details on the electrical components of the HVAC system, including the blower motor, sensors, and control modules.
HVAC Electrical Components
This section provides details on the electrical components of the HVAC system, including the blower motor, sensors, and control modules.
Blower Motor
- Blower motor power: 300 watts (W)
- Speed control: 12-speed electronically controlled
- Airflow range: 150 to 650 CFM
- Noise level: < 60 decibels (dB) at maximum speed
Sensors and Control Modules
- Interior temperature sensor accuracy: ±0.5°C
- Sunload sensor for solar compensation
- HVAC control module with CAN bus integration
- Automatic humidity control for defogging
Note: The HVAC control module ensures seamless integration with the vehicle's infotainment system.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
General Specifications
- System Type
- Automatic Dual-Zone Climate Control
- Refrigerant Type
- R1234yf
- Refrigerant Capacity
- 500 ± 20 g
- Compressor Type
- Variable Displacement
- Blower Motor Power
- 200 W
- Airflow Capacity
- 1200 m³/h
Temperature Control
- Temperature Range
- 16°C to 28°C
- Temperature Resolution
- 0.5°C
- Sensor Accuracy
- ±0.5°C
- Auto Mode Response Time
- 5-10 minutes
Air Distribution
- Vent Modes
-
- Face
- Foot
- Defrost
- Combination
- Airflow Direction Adjustment
- 8-way adjustable
- Rear Seat Ventilation
- Yes
- Rear Vent Airflow Capacity
- 300 m³/h
Filtration System
- Filter Type
- Cabin Microfilter with Activated Carbon
- Filter Part Number
- 64 31 9 388 123
- Filter Replacement interval
- 15,000 miles or 12 months
- Filter Efficiency
- 99% for particles > 0.3 µm
Heating System
- Heater Core Type
- Aluminum
- Heater Core Capacity
- 6 kW
- Water Valve Type
- Electronically Controlled
- Water Valve Part Number
- 64 11 9 388 456
- Max Heating Temperature
- 60°C
Cooling System
- Evaporator Type
- Aluminum
- Evaporator Capacity
- 4.5 kW
- Condenser Type
- Parallel Flow
- Condenser Part Number
- 64 51 9 388 789
- Max Cooling Capacity
- 5.5 kW
Compressor Specifications
- Compressor Part Number
- 64 52 9 388 321
- Compressor Displacement
- 120 cc
- Compressor Oil Type
- PAG 46
- Compressor Oil Capacity
- 150 ± 10 ml
- Compressor Max Rpm
- 8000 rpm
Electrical Specifications
- System Voltage
- 12 V DC
- Blower Motor Current
- 16 A
- Compressor Clutch Current
- 4 A
- Control Module Part Number
- 64 11 9 388 654
- Fuse Rating
- 30 A
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Code Storage
- Up to 50 codes
- Self Diagnosis Capability
- Yes
- Diagnostic Tool Compatibility
-
- BMW ISTA
- Generic OBD-II Scanners
Maintenance Specifications
- Refrigerant Recharge interval
- 24 months or as needed
- System Pressure Check interval
- 12 months
- Compressor Belt Tension
- 500 ± 50 N
- Lubrication Points
-
- Compressor Shaft
- Blower Motor Bearings
- Lubrication interval
- 30,000 miles
Service Information Service
Detailed service requirements and schedules for the HVAC system
- Replace cabin air filter
- Inspect refrigerant levels
- Check compressor belt tension
Ensure all connections are secure and free of leaks
- Recharge refrigerant
- Lubricate compressor shaft and blower motor bearings
- Inspect and clean evaporator and condenser coils
Use only BMW-approved refrigerant and lubricants
- Replace compressor oil
- Inspect and replace water valve if necessary
- Perform full system diagnostic
Ensure all electrical connections are corrosion-free
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the refrigerant type and capacity for the 2021-Present BMW M4 HVAC system?
What is the refrigerant type and capacity for the 2021-Present BMW M4 HVAC system?
The 2021-Present BMW M4 HVAC system uses R1234yf refrigerant, with a total system capacity of approximately 500-550 grams. This refrigerant is environmentally friendly and complies with EU regulations.
Q2 How does the automatic climate control system work in the BMW M4?
How does the automatic climate control system work in the BMW M4?
The BMW M4 features a 3-zone automatic climate control system with individual temperature settings for the driver, front passenger, and rear passengers. It uses sensors to monitor cabin temperature, humidity, and sunlight intensity, adjusting airflow and temperature automatically for optimal comfort.
Q3 What is the power consumption of the HVAC system in the BMW M4?
What is the power consumption of the HVAC system in the BMW M4?
The HVAC system in the BMW M4 consumes approximately 1.5-2.5 kW under full load, depending on external conditions and system settings. The system is designed to balance performance and energy efficiency.
Q4 How often should the cabin air filter be replaced in the BMW M4?
How often should the cabin air filter be replaced in the BMW M4?
The cabin air filter in the BMW M4 should be replaced every 15,000-20,000 miles or once a year, whichever comes first. This ensures optimal air quality and system performance.
Q5 Can the HVAC system be controlled via the BMW ConnectedDrive app?
Can the HVAC system be controlled via the BMW ConnectedDrive app?
Yes, the HVAC system in the BMW M4 can be controlled remotely using the BMW ConnectedDrive app. This allows users to pre-condition the cabin temperature before entering the vehicle.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M4 HVAC System Overview
Coming SoonDetailed technical overview of the HVAC system, including components, specifications, and functionality.
HVAC Maintenance Guide
Coming SoonStep-by-step guide for maintaining the HVAC system, including filter replacement and system diagnostics.
BMW ConnectedDrive HVAC Control
Coming SoonInstructions for using the BMW ConnectedDrive app to control the HVAC system remotely.
Refrigerant Handling and Safety
Coming SoonSafety guidelines and procedures for handling R1234yf refrigerant in the BMW M4 HVAC system.
About the Author
Expert automotive knowledge and experience
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.