BMW M4 2021-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L S58 twin-turbocharged engine in the 2021-Present BMW M4. Includes performance data, system details, and compliance information.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2021-Present BMW M4, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the major sections listed below.
Key Specifications
Displacement
3.0 liters (2,993 cc)
Horsepower
473 hp (353 kW)
Torque
406 lb-ft (550 Nm)
Compression Ratio
10.2:1
Redline
7,200 rpm
Available Specifications
Engine Design and Architecture
Details about the design, architecture, and key components of the 3.0l-engine
Engine Design and Architecture
Details about the design, architecture, and key components of the 3.0l-engine
Inline-6 Configuration
- 3.0-liter inline-6 engine with M TwinPower Turbo technology
- Aluminum crankcase with closed-deck design for enhanced rigidity
- Forged crankshaft for improved durability and performance
- Direct injection system with up to 350 bar fuel pressure
Turbocharging System
- Twin-scroll turbochargers for reduced turbo lag
- Maximum boost pressure of 1.7 bar (24.7 psi)
- Air-to-water intercooler for efficient charge air cooling
- Electronically controlled wastegate for precise boost management
Note: The turbocharging system is optimized for high performance and responsiveness.
Performance Specifications
Technical details about the engine's performance metrics
Performance Specifications
Technical details about the engine's performance metrics
Power and Torque
- Maximum power output of 473 hp (353 kW) at 6,250 rpm
- Peak torque of 406 lb-ft (550 Nm) at 2,650-6,130 rpm
- Redline at 7,200 rpm
- 0-60 mph acceleration in 3.8 seconds (with optional M Driver's Package)
Fuel Efficiency and Emissions
- Combined fuel consumption of 23 mpg (10.2 L/100 km)
- CO2 emissions of 234 g/km
- Complies with Euro 6d-TEMP emission standards
- Auto Start-Stop function for improved fuel efficiency
Cooling and Lubrication Systems
Details about the engine's cooling and lubrication systems
Cooling and Lubrication Systems
Details about the engine's cooling and lubrication systems
Cooling System
- High-performance cooling system with dual radiators
- Electric coolant pump for precise temperature control
- Oil cooler integrated into the cooling circuit
- Thermostat-controlled cooling for optimal engine temperature
Lubrication System
- Dry-sump lubrication system for consistent oil supply
- Oil capacity of 7.5 liters (8.0 quarts)
- Electronically controlled oil pump for variable pressure
- Oil temperature monitoring for enhanced engine protection
Note: The dry-sump system ensures reliable lubrication during high-performance driving.
Engine Management and Electronics
Information about the engine's electronic control systems
Engine Management and Electronics
Information about the engine's electronic control systems
Engine Control Unit (ECU)
- Bosch MEVD 17.2.6 ECU for precise engine management
- Adaptive throttle mapping for dynamic driving modes
- Integrated knock control for optimized combustion
- Real-time monitoring of engine parameters
Ignition and Fuel Systems
- High-energy ignition coils for reliable spark delivery
- Multi-hole piezo injectors for precise fuel metering
- Variable valve timing (Double-VANOS) for improved efficiency
- Valvetronic system for continuous valve lift adjustment
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- S58B30
- Configuration
- Inline 6-cylinder
- Displacement
- 2993 cc
- Bore
- 84.0 mm
- Stroke
- 90.0 mm
- Compression Ratio
- 9.3:1
- Valvetrain
- DOHC, 24-valve, VANOS variable valve timing
Performance
- Max Power
- 473 hp @ 6250 rpm
- Max Torque
- 406 lb-ft @ 2750-5500 rpm
- Redline
- 7200 rpm
- Fuel System
- Direct injection
- Fuel Type
- Premium unleaded (91 AKI or higher)
Turbocharging
- Type
- Twin-scroll twin-turbo
- Boost Pressure
- 24.6 psi (1.7 bar)
- intercooler
- Air-to-water
- Turbo Part Numbers
-
- 11-62-8-075-123
- 11-62-8-075-124
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17-11-7-838-456
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30
- Oil Filter Part Number
- 11-42-7-838-321
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK SILZKBR8D8S
- Spark Plug Gap
- 0.8 mm
- Ignition Coil Part Number
- 12-13-7-838-456
- Ignition Timing
- Fully electronic, adaptive
Emissions
- Emission Standard
- EURO 6d
- Catalytic Converter Part Number
- 18-30-8-075-123
- Oxygen Sensor Part Numbers
-
- 11-78-7-838-321
- 11-78-7-838-322
- Exhaust Gas Recirculation
- Integrated into turbocharging system
Engine Management
- Ecu Part Number
- 12-14-7-838-456
- Software Version
- I-Level 21-03
- Diagnostic interface
- OBD-II
- Sensor References
- Crankshaft Position Sensor: 12-14-7-838-457Camshaft Position Sensor: 12-14-7-838-458Knock Sensor: 12-14-7-838-459
Maintenance
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Lifetime lubrication, no scheduled replacement
- Belt Drive
- Serpentine belt, replace every 60000 miles
- Belt Part Number
- 12-31-7-838-321
Operational Limits
- Max Engine Temperature
- 120°C
- Max Oil Temperature
- 150°C
- Max Turbocharger Speed
- 180000 rpm
- Max Boost Pressure
- 29 psi (2.0 bar)
Service Information Service
Detailed service requirements and schedules for the 3.0l S58 engine
- Oil and filter change
- Inspect cooling system
- Check turbocharger system
- Inspect ignition system
Use only BMW-approved fluids and parts
- Replace air filter
- Replace spark plugs
- Inspect fuel system
- Check engine mounts
Perform diagnostic scan for fault codes
- Replace serpentine belt
- Inspect timing chain
- Replace coolant
- Check turbocharger wastegate
Inspect for oil leaks and turbocharger wear
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2021-Present BMW M4?
What is the horsepower and torque output of the 3.0L engine in the 2021-Present BMW M4?
The 3.0L S58 twin-turbocharged inline-6 engine in the 2021-Present BMW M4 produces 473 horsepower at 6,250 rpm and 406 lb-ft of torque between 2,650 and 6,130 rpm in the standard configuration. The Competition trim increases output to 503 horsepower and 479 lb-ft of torque.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L S58 engine utilizes a high-precision direct fuel injection system with a maximum injection pressure of 350 bar. This system ensures optimal fuel atomization and combustion efficiency, contributing to both performance and emissions compliance.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
BMW recommends using SAE 0W-30 or 5W-30 synthetic oil that meets BMW Longlife-01 FE or Longlife-17 FE+ specifications. The oil capacity is approximately 6.5 liters (6.9 quarts), including the oil filter.
Q4 What is the redline for the 3.0L engine in the BMW M4?
What is the redline for the 3.0L engine in the BMW M4?
The redline for the 3.0L S58 engine is 7,200 rpm. This high-revving capability is a hallmark of BMW M engines, providing exceptional performance and responsiveness.
Q5 Does the 3.0L engine feature a valvetronic system?
Does the 3.0L engine feature a valvetronic system?
Yes, the 3.0L S58 engine is equipped with BMW's Valvetronic fully variable valve lift system, which optimizes engine performance and efficiency by continuously adjusting valve lift based on driving conditions.
Q6 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The 3.0L S58 engine has a compression ratio of 9.3:1, which is optimized for its twin-turbocharged design to balance performance and reliability.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M4 Owner's Manual
Coming SoonThe official owner's manual for the 2021-Present BMW M4, providing detailed information on vehicle operation, maintenance, and specifications.
S58 Engine Technical Overview
Coming SoonA comprehensive technical guide covering the design, features, and performance characteristics of the 3.0L S58 engine.
BMW M4 Maintenance Schedule
Coming SoonDetailed maintenance schedule for the 2021-Present BMW M4, including service intervals and recommended procedures for the 3.0L engine.
Genuine BMW Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other vehicle systems.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.