BMW M3 2021-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L twin-turbocharged inline-6 engine in the 2021-Present BMW M3. Includes performance data, component details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2021-Present BMW M3, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Displacement
2,993 cc (3.0 liters)
Horsepower
473 hp (353 kW)
Torque
406 lb-ft (550 Nm)
Compression Ratio
10.2:1
Fuel Economy
17 mpg city / 25 mpg highway
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum horsepower: 473 hp (353 kW) at 6,250 rpm
- Peak torque: 406 lb-ft (550 Nm) at 2,750-5,500 rpm
- Redline: 7,200 rpm
- Compression ratio: 10.2:1
- Turbocharger: TwinPower Turbo technology
Acceleration
- 0-60 mph: 3.8 seconds (with optional M Driver's Package)
- Top speed: 155 mph (electronically limited, optional increase to 180 mph)
- Quarter-mile time: 11.8 seconds
- Power-to-weight ratio: 6.5 lb/hp
Note: Performance figures may vary based on transmission type and optional packages.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Layout
- Configuration: Inline 6-cylinder
- Displacement: 2,993 cc (3.0 liters)
- Cylinder bore: 84.0 mm
- Piston stroke: 90.0 mm
- Valvetrain: DOHC with Valvetronic and Double-VANOS
Materials and Cooling
- Engine block: Aluminum alloy with closed-deck design
- Cylinder head: Aluminum alloy
- Cooling system: Dual-circuit cooling with electric water pump
- Oil system: Wet sump with variable oil pump
- Intercooler: Air-to-water intercooler
Note: The closed-deck design enhances engine rigidity and durability under high loads.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance standards for the 3.0l-engine.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance standards for the 3.0l-engine.
Fuel System
- Fuel type: Premium unleaded (91 octane or higher)
- Fuel delivery: Direct injection with high-pressure pump
- Fuel economy: 17 mpg city / 25 mpg highway
- Tank capacity: 15.6 gallons (59 liters)
Emissions
- Emissions standard: Euro 6d / ULEV 50
- CO2 emissions: 227 g/km
- Particulate filter: Standard with gasoline particulate filter (GPF)
- Exhaust system: Dual-branch exhaust with electronically controlled flaps
Note: The GPF significantly reduces particulate emissions without compromising performance.
Transmission and Drivetrain
Details on the transmission options and drivetrain configurations available for the 3.0l-engine.
Transmission and Drivetrain
Details on the transmission options and drivetrain configurations available for the 3.0l-engine.
Transmission Options
- Standard transmission: 6-speed manual
- Optional transmission: 8-speed M Steptronic automatic with Drivelogic
- Shift times: 80 ms in manual mode
- Launch Control: Standard with automatic transmission
Drivetrain
- Drivetrain layout: Rear-wheel drive (RWD)
- Optional drivetrain: M xDrive all-wheel drive (AWD)
- Differential: Active M Differential with variable locking
- Weight distribution: 52:48 (front:rear)
Note: The M xDrive system allows for dynamic torque distribution between the front and rear axles.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- S58B30
- Configuration
- Inline 6-cylinder
- Displacement
- 2993 cc
- Bore
- 84.0 mm
- Stroke
- 90.0 mm
- Compression Ratio
- 9.3:1
- Valvetrain
- DOHC, 24-valve, Valvetronic, VANOS
Performance
- Max Power
- 473 hp @ 6250 rpm
- Max Torque
- 406 lb-ft @ 2750-5500 rpm
- Redline
- 7200 rpm
- Fuel System
- Direct injection
- Fuel Type
- Premium unleaded (91 AKI minimum)
Turbocharging
- Turbo Type
- Twin-scroll twin-turbo
- Boost Pressure
- 24.7 psi (1.7 bar)
- intercooler Type
- Air-to-water
- Wastegate Control
- Electronically controlled
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Coolant Type
- BMW-approved antifreeze (G48)
- Radiator Part Number
- 17118638307
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW TwinPower Turbo LL-01 0W-30 or equivalent
- Oil Filter Part Number
- 11427837929
- Oil Pump Type
- Variable displacement
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138657273
- Ignition Timing Control
- Fully electronic
Emissions
- Emission Standard
- EU6d, LEV III
- Catalytic Converter Part Number
- 18308638307
- Oxygen Sensor Type
- Wideband
- Particulate Filter
- Integrated in exhaust system
Engine Management
- Ecu Type
- Bosch MEVD 17.2.6
- Software Version
- V1.2.3
- Diagnostic interface
- OBD-II
- Sensor References
- Crankshaft Position Sensor: 12147586903Camshaft Position Sensor: 12147586904
Maintenance
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Life
- Lifetime (no scheduled replacement)
- Valve Clearance
- Hydraulic, self-adjusting
- Service indicator Reset Procedure
- Via iDrive system
Diagnostics
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tools
-
- BMW ISTA+
- Autologic
- Sensor Tolerances
- Oil Pressure: 2.5-5.5 bar @ 2000 rpmCoolant Temperature: 90-110°C (operating range)
Service Information Service
Detailed service requirements and schedules for the S58B30 engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect exhaust system
Reset service indicator after completion
- Replace air filter
- Inspect fuel system
- Check ignition system
- Inspect engine mounts
Perform full diagnostic scan
- Replace spark plugs
- Inspect turbocharger system
- Check valve timing
- Replace cabin air filter
Use only BMW-approved parts
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2021-Present BMW M3?
What is the horsepower and torque output of the 3.0L engine in the 2021-Present BMW M3?
The 3.0L S58 inline-6 twin-turbocharged engine in the BMW M3 produces 473 horsepower (353 kW) and 406 lb-ft (550 Nm) of torque in the standard configuration. The Competition trim increases output to 503 horsepower (375 kW) and 479 lb-ft (650 Nm) of torque.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L S58 engine utilizes a high-precision direct fuel injection system with a maximum injection pressure of 350 bar. This system ensures optimal fuel atomization and combustion efficiency.
Q3 What is the redline for the 3.0L engine in the BMW M3?
What is the redline for the 3.0L engine in the BMW M3?
The redline for the 3.0L S58 engine is 7,200 RPM, allowing for high-revving performance and responsiveness.
Q4 Does the 3.0L engine feature variable valve timing?
Does the 3.0L engine feature variable valve timing?
Yes, the S58 engine is equipped with BMW's Double-VANOS variable valve timing system, which adjusts the timing of the intake and exhaust camshafts for optimal performance and efficiency across the RPM range.
Q5 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The recommended oil type is BMW TwinPower Turbo LL-01 or LL-01 FE 0W-30 or 5W-30 synthetic oil. The oil capacity is approximately 6.5 liters (6.9 quarts), including the oil filter.
Q6 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio of the S58 engine is 9.3:1, optimized for turbocharged performance and efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M3 Owner's Manual
Coming SoonOfficial owner's manual for the 2021-Present BMW M3, including detailed engine specifications, maintenance schedules, and operating instructions.
S58 Engine Technical Overview
Coming SoonA comprehensive technical guide covering the design, features, and performance specifications of the S58 3.0L twin-turbocharged engine.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine, ensuring compatibility and optimal performance.
BMW Service and Maintenance Guide
Coming SoonDetailed service procedures and maintenance recommendations for the 3.0L engine, including oil changes, filter replacements, and inspections.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.