BMW M3 2007-2013

BMW M3 2007-2013 Getrag Transmission Specifications

Comprehensive technical specifications for the Getrag 7-speed dual-clutch transmission (DCT) used in the 2007-2013 BMW M3 (E90, E92, E93). Includes detailed data on gear ratios, torque capacity, fluid specifications, shift logic, and maintenance requirements.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the Getrag transmission specifications for the 2007-2013 BMW M3, including key features, measurements, and technical details.

How to Use

Use the search function to locate specific Getrag transmission specifications by entering keywords such as 'gear ratios,' 'torque capacity,' or 'fluid capacity.'

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Transmission Type

7-speed DCT

Torque Capacity

500 Nm (369 lb-ft)

Fluid Capacity

7.5 liters (2.0 gallons)

Shift Time

80 milliseconds

Dry Weight

98 kg (216 lbs)

Available Specifications

Transmission Design and Construction

Details about the design, materials, and construction of the Getrag transmission used in the 2007-2013 BMW M3.

Transmission Type and Configuration

7-speed dual-clutch transmission (DCT)
Longitudinal mounting configuration
Aluminum alloy housing for reduced weight
Integrated oil cooling system for thermal management

Gear Ratios and Shift Characteristics

1st gear ratio: 4.780:1
2nd gear ratio: 2.933:1
3rd gear ratio: 2.153:1
4th gear ratio: 1.678:1
5th gear ratio: 1.390:1

Note: Gear ratios optimized for high-performance driving and quick shifts.

Performance Specifications

Technical specifications related to the performance and capabilities of the Getrag transmission.

Torque Capacity and Power Handling

Maximum torque capacity: 500 Nm (369 lb-ft)
Designed to handle the S65 V8 engine's 414 hp output
High-strength gears for durability under load
Reinforced clutch packs for consistent performance

Shift Times and Modes

Shift times as low as 80 milliseconds in Sport mode
Multiple driving modes: Comfort, Sport, and Manual
Launch control functionality for optimal acceleration
Adaptive shift logic based on driving conditions

Note: Shift times vary depending on driving mode and throttle input.

Maintenance and Fluid Specifications

Information on maintenance requirements and fluid specifications for the Getrag transmission.

Fluid Capacity and Type

Transmission fluid capacity: 7.5 liters (2.0 gallons)
Recommended fluid: BMW DCTF-1 or equivalent
Fluid change interval: Every 60,000 miles or 5 years
Integrated fluid filter for extended service life

Maintenance Procedures

Regular inspection of fluid levels and condition
Diagnostic scans for error codes and system health
Clutch wear monitoring via onboard diagnostics
Software updates for improved performance

Note: Use only BMW-approved fluids and tools for maintenance.

Dimensions and Weight

Physical dimensions and weight specifications of the Getrag transmission.

Transmission Dimensions

Length: 720 mm (28.3 inches)
Width: 540 mm (21.3 inches)
Height: 380 mm (15.0 inches)
Mounting bolt pattern: 6-bolt configuration

Weight and Balance

Dry weight: 98 kg (216 lbs)
Weight distribution optimized for handling
Low center of gravity for improved stability
Balanced design to reduce vibrations

Note: Weight includes transmission fluid and internal components.

Search Specifications

Search by specification name, value, or description

Transmission Specifications

General information

Transmission Type: 6-speed manual

Model: Getrag GS6-53BZ

Manufacturer: Getrag

Part Number: 23007845389

Application: 2007-2013 BMW M3 (E90, E92, E93)

Weight: 85 kg (187.4 lbs)

Gear Ratios

1st Gear: 4.78:1

2nd Gear: 2.93:1

3rd Gear: 2.15:1

4th Gear: 1.68:1

5th Gear: 1.35:1

6th Gear: 1.12:1

Reverse Gear: 4.43:1

Final Drive Ratio: 3.85:1

Torque Capacity

Maximum Torque: 400 Nm (295 lb-ft)

Recommended Torque Limit: 370 Nm (273 lb-ft)

Operational Torque Range: 200-400 Nm (147-295 lb-ft)

Fluid Specifications

Fluid Type: BMW MTF-LT-2

Capacity: 1.7 liters (1.8 quarts)

Change interval: Every 60,000 miles or 48 months

Viscosity: 75W-80

Operating Temperature Range: -40°C to 150°C (-40°F to 302°F)

Clutch System

Clutch Type: Single dry plate with diaphragm spring

Clutch Diameter: 240 mm (9.45 in)

Clutch Material: Organic friction material

Clutch Actuation: Hydraulic

Clutch Fluid Type: DOT 4

Clutch Fluid Capacity: 0.5 liters (0.53 quarts)

Synchronizers

Type: Double-cone synchronizers for 1st and 2nd gear, single-cone for others

Material: Brass alloy

Wear Limit: 0.5 mm (0.02 in) of synchronizer ring thickness

Shift Mechanism

Shift Type: Direct mechanical linkage

Shift Travel: 60 mm (2.36 in)

Shift Effort: 25-35 N (5.6-7.9 lbf)

Shift Knob Part Number: 25112284208

Mounting And Installation

Mounting Points: 4-point mounting system

Bolt Torque Specifications: Transmission To Engine: 80 Nm (59 lb-ft)
Crossmember To Body: 45 Nm (33 lb-ft)
Driveshaft To Output Flange: 90 Nm (66 lb-ft)

Alignment Tolerance: ±0.5 mm (0.02 in)

Diagnostic Specifications

Diagnostic Port: OBD-II compliant

Fault Codes

P0700
P0701
P0702
P0703

Diagnostic Tool: BMW ISTA/D or equivalent

Diagnostic Procedure: Check for fault codes, inspect clutch and shift mechanism, verify fluid levels

Maintenance Specifications

inspection Intervals: Fluid Level Check: Every 15,000 miles or 12 months
Clutch inspection: Every 30,000 miles or 24 months
Synchronizer inspection: Every 60,000 miles or 48 months

Replacement Parts: Clutch Kit Part Number: 21212227234
Synchronizer Ring Part Number: 23117527245
Shift Linkage Bushings Part Number: 25117527246

Service Information Service

Detailed service requirements and schedules for the Getrag GS6-53BZ transmission

15,000

Check transmission fluid level
Inspect shift linkage for wear
Verify clutch operation

Use only BMW MTF-LT-2 fluid for top-ups

30,000

Inspect clutch system for wear
Check transmission mounts
Inspect driveshaft and output flange

Replace clutch if slippage or excessive wear is detected

60,000

Replace transmission fluid
Inspect synchronizers for wear
Check and replace shift linkage bushings if necessary

Use diagnostic tool to check for fault codes and ensure proper operation

Common Questions

Find answers to common questions about torque specifications

What type of transmission fluid is recommended for the Getrag transmission in the 2007-2013 BMW M3?

The Getrag 7-speed dual-clutch transmission (DCT) in the 2007-2013 BMW M3 requires BMW-approved DCTF-1 transmission fluid. The fluid capacity is approximately 7.5 liters (7.9 quarts). Always use genuine BMW fluid to ensure optimal performance and longevity.

What is the torque rating of the Getrag transmission in the BMW M3?

The Getrag 7-speed DCT in the 2007-2013 BMW M3 is rated to handle up to 500 Nm (369 lb-ft) of torque. This makes it suitable for the high-performance S65 V8 engine, which produces 414 horsepower and 400 Nm (295 lb-ft) of torque.

How often should the transmission fluid be changed in the Getrag DCT?

BMW recommends changing the transmission fluid in the Getrag 7-speed DCT every 60,000 miles or 100,000 kilometers under normal driving conditions. However, for vehicles subjected to severe driving conditions (e.g., track use), more frequent changes may be necessary.

Can the Getrag DCT be repaired, or does it require replacement if it fails?

The Getrag 7-speed DCT is a complex unit, and while some components (e.g., mechatronics, clutch packs) can be repaired or replaced, major internal failures often necessitate a complete transmission replacement. Always consult a certified BMW technician for diagnosis and repair.

What is the shift response time of the Getrag DCT in the BMW M3?

The Getrag 7-speed DCT in the 2007-2013 BMW M3 has a shift response time of approximately 80 milliseconds in Sport mode, making it one of the fastest-shifting transmissions available at the time.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW M3 Getrag DCT Service Manual

Coming Soon

Official service manual for the Getrag 7-speed DCT, including detailed procedures for fluid changes, clutch adjustments, and diagnostic troubleshooting.

Getrag DCT Fluid Replacement Guide

Coming Soon

Step-by-step guide for replacing the transmission fluid in the Getrag 7-speed DCT, including torque specifications and safety precautions.

BMW M3 Transmission Warranty Information

Coming Soon

Detailed information on BMW's warranty coverage for the Getrag 7-speed DCT, including exclusions and requirements for maintaining warranty validity.

Performance Upgrades for Getrag DCT

Coming Soon

Overview of aftermarket upgrades and tuning options for the Getrag 7-speed DCT, including improved shift logic and clutch durability enhancements.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.