BMW M3 2007-2013 Brakes Specifications
A detailed guide to the brake specifications of the 2007-2013 BMW M3, covering rotor sizes, calipers, pads, and advanced features for maintenance, repair, and upgrade.
Brake System Specifications Specifications
This document provides a comprehensive overview of the brake system specifications for the 2007-2013 BMW M3. It includes detailed information about brake components, technical specifications, and maintenance guidelines. Use this guide to understand the braking system's design, performance, and service requirements. Navigate through the sections to find specific details or use the search functionality to locate information quickly.
How to Use
To search for specific information, use the search bar at the top of the document. Enter keywords such as 'rotor size,' 'caliper type,' or 'brake fluid' to find relevant details.
Navigate through the document by clicking on the section titles in the table of contents. Each section includes subsections with detailed technical specifications and descriptions.
Key Brake Specifications
Front Rotor Diameter
14.2 in (360 mm)
Rear Rotor Diameter
13.2 in (336 mm)
Front Caliper Pistons
6-piston
Rear Caliper Pistons
2-piston
Brake Fluid Type
DOT 4
Available Specifications
Brake System Overview
This section provides a general overview of the braking system in the 2007-2013 BMW M3, including its key components and design features. The M3's braking system is optimized for high-performance driving, with a focus on stopping power, heat dissipation, and pedal feel.
Brake System Overview
This section provides a general overview of the braking system in the 2007-2013 BMW M3, including its key components and design features. The M3's braking system is optimized for high-performance driving, with a focus on stopping power, heat dissipation, and pedal feel.
Key Brake Components
- Ventilated, cross-drilled steel brake rotors front and rear
- Six-piston fixed front calipers with four-piston rear calipers
- High-performance brake pads with advanced friction materials
- Stainless steel brake lines for consistent pedal feel
- Electronic Brakeforce Distribution (EBD) system
Brake System Design Features
- Weight-optimized brake components for reduced unsprung mass
- Aerodynamic cooling ducts for improved heat management
- Anti-fade technology to maintain braking performance under heavy use
- Integrated parking brake with electronic activation
- Adaptive brake lights for enhanced safety
Front Brake Specifications
This section details the specifications of the front brake components, including rotor size, caliper type, and pad dimensions. The front brakes are responsible for the majority of the braking force due to the vehicle's weight distribution.
Front Brake Specifications
This section details the specifications of the front brake components, including rotor size, caliper type, and pad dimensions. The front brakes are responsible for the majority of the braking force due to the vehicle's weight distribution.
Front Brake Rotor
- Rotor diameter: 14.2 inches (360 mm)
- Rotor thickness: 1.4 inches (35 mm)
- Ventilated, cross-drilled design for heat dissipation
- Two-piece rotor construction for reduced weight
- Duralumin rotor hats for improved durability
Front Brake Caliper
- Six-piston fixed calipers with aluminum construction
- Piston diameters: 1.5 inches (38 mm) and 1.1 inches (28 mm)
- Quick-swap pad design for easy maintenance
- Red painted calipers with M3 logo
- Dust seals for protection against debris
Rear Brake Specifications
This section provides detailed information about the rear brake components, including rotor size, caliper type, and pad specifications. The rear brakes work in conjunction with the front brakes to provide balanced stopping power.
Rear Brake Specifications
This section provides detailed information about the rear brake components, including rotor size, caliper type, and pad specifications. The rear brakes work in conjunction with the front brakes to provide balanced stopping power.
Rear Brake Rotor
- Rotor diameter: 13.2 inches (336 mm)
- Rotor thickness: 0.8 inches (20 mm)
- Ventilated, cross-drilled design for heat dissipation
- One-piece rotor construction for simplicity
- Corrosion-resistant coating for durability
Rear Brake Caliper
- Two-piston fixed calipers with aluminum construction
- Piston diameter: 1.1 inches (28 mm)
- Integrated parking brake functionality
- Dust seals for protection against debris
- Weight-optimized design for reduced unsprung mass
Brake Fluid and Hydraulic System
This section covers the specifications of the brake fluid and hydraulic system, including fluid type, reservoir capacity, and system pressure. Proper maintenance of the hydraulic system is crucial for optimal braking performance.
Brake Fluid and Hydraulic System
This section covers the specifications of the brake fluid and hydraulic system, including fluid type, reservoir capacity, and system pressure. Proper maintenance of the hydraulic system is crucial for optimal braking performance.
Brake Fluid Specifications
- Recommended brake fluid: DOT 4
- Reservoir capacity: 0.5 liters (0.13 gallons)
- Fluid change interval: Every 24 months or 30,000 miles
- Hydraulic system pressure: Up to 100 bar (1,450 psi)
- Bleeding procedure required for air removal
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Brakes Specifications
Overview
- Type
- Fixed Caliper Disc Brakes
- Configuration
- Two-piece rotor design
- Platform
- E90/E92/E93
- Material
- Cast iron rotors
- Location
- Front and Rear
Dimensions
- Front Rotor Diameter
- 13.7 inches (348 mm)
- Rear Rotor Diameter
- 13.2 inches (335 mm)
- Front Caliper Piston Diameter
- 1.97 inches (50 mm)
- Rear Caliper Piston Diameter
- 1.38 inches (35 mm)
- Brake Pad Thickness
- 0.47 inches (12 mm)
- Brake Line Diameter
- 0.25 inches (6.3 mm)
Materials
- Rotors
- Cast iron with cross-drilled design
- Calipers
- Aluminum alloy
- Brake Pads
- High-carbon steel with ceramic coating
- Brake Lines
- Stainless steel braided hoses
Features
- Cooling System
-
- Ventilated rotors
- Cross-drilled rotors for heat dissipation
- Internal cooling ducts
- Brake Assist
-
- Electronic Brakeforce Distribution (EBD)
- Brake Assist (BA)
- Dynamic Brake Control (DBC)
- Drive Modes
-
- M Dynamic Mode (MDM)
- Sport mode calibration
- Comfort mode calibration
- Additional Features
-
- Anti-lock Braking System (ABS)
- Cornering Brake Control (CBC)
- Automatic Differential Brake (ADB)
Safety Features
- ABS
-
- Four-channel ABS with individual wheel control
- Electronic Brakeforce Distribution (EBD)
- Emergency Brake Assist (EBA)
- Stability Control
-
- Dynamic Stability Control (DSC)
- M Dynamic Mode (MDM)
- Automatic Stability Control (ASC)
- Brake Assist
-
- Brake Assist (BA)
- Dynamic Brake Control (DBC)
Comfort Features
- Noise Reduction
-
- Sintered brake pads with noise damping
- Anti-vibration brake shims
- Rotor coating for noise reduction
- Pedal Feel
-
- Electronic pedal feel enhancer
- Adjustable brake pedal height
- Wear indicators
-
- Electronic brake pad wear sensors
- Dashboard warning lights
- Maintenance Convenience
-
- Long-life brake components
- Low-dust brake pads
Accessories
- Performance Upgrades
-
- High-performance brake pads
- Upgraded brake fluid
- Lightweight brake rotors
- Replacement Kits
-
- Brake rotor replacement kit
- Brake pad wear sensor kit
- Brake line replacement kit
- Service Tools
-
- Brake bleeding kit
- Brake caliper piston compressor
- Brake rotor resurfacing tool
Maintenance
- Service interval
-
- Inspect brake pads and rotors every 12,000 miles
- Replace brake fluid every 30,000 miles
- Clean and lubricate brake caliper slides every 15,000 miles
- Inspect brake hoses every 30,000 miles
- Replace brake pads every 30,000 - 50,000 miles
- Notes
- Use BMW-approved brake fluid (DOT 4 or DOT 5.1)
Warranty
- New Vehicle
- Miles: 50,000 milesYears: 4 yearsCoverage: Brake components including pads, rotors, and calipers
- Certified Pre Owned
- Miles: Unlimited milesYears: 6 yearsCoverage: Brake system components
- Parts Warranty
- Miles: 2 yearsYears: Unlimited milesCoverage: Brake parts and accessories
- Corrosion Perforation
- Miles: 12 yearsYears: Unlimited milesCoverage: Brake rotors and drums
Production Details
- Manufacturer
- Calipers: BremboRotors: BMW GroupBrake Pads: Pagid (OEM)
- Manufacturing Process
-
- CNC machining of calipers
- Cast iron rotor casting
- High-temperature rotor coating
- Sintering of brake pads
- Quality Control
- inspection: Dimensional Accuracy: ±0.01 mm, Surface Finish: RA < 0.8 μmTesting: Pressure testing, Heat cycle testing, Friction testing
- Sustainability Practices
-
- Recycling of scrap materials
- Low-emission manufacturing processes
- Energy-efficient production lines
- Production Metrics
- Annual Volume: Over 10,000 unitsDefect Rate: <1%Warranty Claims: <2%
Service Information for Brakes Service
Maintenance and service requirements specific to this component
- Inspect brake pads and rotors
- Check brake fluid level
- Inspect brake hoses and lines
- Clean and lubricate caliper slides
- Test brake system for leaks
Use BMW-approved brake fluid (DOT 4 or DOT 5.1)
- Replace brake fluid
- Inspect brake sensors
- Clean brake pad abutments
- Inspect caliper bolts
- Check ABS sensor function
Recommended to flush and replace brake fluid every 30,000 miles
- Replace brake pads
- Inspect and resurface rotors
- Replace brake rotors if worn below 3.5 mm
- Inspect and replace brake hoses if damaged
- Bleed brake system
Replace brake components if excessive wear is detected
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the technical specifications of the brakes for a 2007-2013 BMW M3?
What are the technical specifications of the brakes for a 2007-2013 BMW M3?
The 2007-2013 BMW M3 features a high-performance braking system with 14.2-inch ventilated front discs and 13.2-inch ventilated rear discs. The front calipers are 6-piston, while the rear calipers are 4-piston, both made of aluminum. The system is compatible with the E92 and E93 chassis models and is designed for optimal heat dissipation and consistent stopping power.
Q2 What maintenance is required for the brakes on a 2007-2013 BMW M3?
What maintenance is required for the brakes on a 2007-2013 BMW M3?
Regular brake maintenance for the 2007-2013 BMW M3 includes inspecting brake pads every 10,000 miles, replacing them every 30,000 miles, and resurfacing or replacing rotors every 50,000 miles. Brake fluid should be changed every 30,000 miles, and the entire system should be inspected for leaks or wear. Always use OEM or equivalent parts to maintain performance and safety.
Q3 How do I replace the brake pads on a 2007-2013 BMW M3?
How do I replace the brake pads on a 2007-2013 BMW M3?
To replace the brake pads on a 2007-2013 BMW M3, start by raising the vehicle and removing the wheels. Remove the caliper bolts and slide off the caliper, taking care not to damage the brake hose. Remove the old pads and install the new ones, ensuring they are properly seated. Reinstall the caliper and tighten the bolts to the specified torque. Repeat for all wheels, then bleed the brake system if necessary. Finally, test the brakes by driving carefully and applying them gradually.
Q4 What are common brake issues in the 2007-2013 BMW M3 and how can they be fixed?
What are common brake issues in the 2007-2013 BMW M3 and how can they be fixed?
Common brake issues include worn brake pads, warped rotors, and spongy brake pedals. Worn pads can be replaced by following the standard pad replacement procedure. Warped rotors may require resurfacing or replacement. A spongy pedal often indicates air in the brake lines, requiring bleeding of the system. Always check brake fluid levels and ensure the parking brake is fully released before driving.
Q5 How can I optimize the braking performance of my 2007-2013 BMW M3?
How can I optimize the braking performance of my 2007-2013 BMW M3?
To optimize braking performance on your 2007-2013 BMW M3, consider upgrading to high-performance brake pads and rotors designed for your driving conditions. Ensure proper brake fluid levels and use a high-boiling-point fluid. Regularly clean and inspect the brake components, and avoid using low-quality aftermarket parts. For track use, consider upgrading to steel brake lines and ensuring proper cooling of the brake system.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M3 Brake Service Manual
Coming SoonA comprehensive guide covering brake system maintenance, repair, and replacement procedures for the 2007-2013 BMW M3.
Technical Service Bulletin - Brake System Update
Coming SoonOfficial updates and technical bulletins from BMW regarding brake system improvements and recalls for the 2007-2013 M3 models.
BMW M3 Parts Catalog
Coming SoonA detailed catalog of genuine BMW parts for the brake system of the 2007-2013 M3, including part numbers and compatibility information.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.