BMW M2 2016-2021 HVAC Specifications
Detailed technical specifications and operational guide for the HVAC system in the 2016-2021 BMW M2. Learn about system components, refrigerant requirements, climate control features, and diagnostic procedures.
Overview Specifications
Comprehensive description of the HVAC specifications for the 2016-2021 BMW M2, including key features, measurements, and technical details.
How to Use
Use the search function to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'.
Navigate through the HVAC documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.
Key Specifications
Refrigerant Capacity
500 ± 20 g
Heating Capacity
5.5 kW
Maximum Airflow
900 m³/h
Temperature Range
16°C to 32°C
Refrigerant Type
R-1234yf
Available Specifications
HVAC System Overview
This section provides an overview of the HVAC system, including its components, functionality, and integration with the vehicle's electronics.
HVAC System Overview
This section provides an overview of the HVAC system, including its components, functionality, and integration with the vehicle's electronics.
System Components
- Dual-zone automatic climate control system
- High-performance blower motor with variable speed control
- Electrically driven refrigerant compressor
- Integrated cabin air filter with activated charcoal
- Dual evaporators for independent temperature control
System Integration
- Fully integrated with iDrive infotainment system
- Automatic temperature regulation based on external and internal sensors
- Seat heating and cooling integration
- Defrost and defogging functions with automatic activation
Note: The HVAC system is designed to work seamlessly with the vehicle's electronics, ensuring optimal performance and user convenience.
Refrigerant System
This section covers the refrigerant system, including specifications, capacity, and maintenance requirements.
Refrigerant System
This section covers the refrigerant system, including specifications, capacity, and maintenance requirements.
Refrigerant Specifications
- Refrigerant type: R-1234yf
- Refrigerant capacity: 500 ± 20 g
- Operating pressure: 1.5 - 3.0 MPa
- Refrigerant oil: PAG (Polyalkylene Glycol)
- Environmental compliance: EU MAC Directive 2006/40/EC
Maintenance and Service
- Recommended refrigerant recharge interval: 2 years or 30,000 miles
- Refrigerant system leak detection via electronic sensors
- Service port locations: High-pressure and low-pressure ports on the compressor
- Refrigerant recovery and recycling procedures compliant with EPA regulations
Note: Always use BMW-approved refrigerant and oil to ensure system compatibility and performance.
Climate Control Features
This section details the advanced climate control features available in the 2016-2021 BMW M2.
Climate Control Features
This section details the advanced climate control features available in the 2016-2021 BMW M2.
Temperature Control
- Dual-zone temperature control with ±0.5°C accuracy
- Temperature range: 16°C to 32°C (60.8°F to 89.6°F)
- Automatic temperature adjustment based on sunlight and occupancy sensors
- Steering wheel-mounted controls for driver convenience
Air Distribution
- Multi-mode air distribution (face, foot, windshield)
- Automatic air recirculation based on external air quality
- Adjustable vent flow direction and intensity
- Rear passenger air vents with independent control
Note: The air distribution system is designed to provide optimal comfort for all occupants.
Heating and Ventilation
This section covers the heating and ventilation components, including specifications and performance metrics.
Heating and Ventilation
This section covers the heating and ventilation components, including specifications and performance metrics.
Heating System
- High-efficiency PTC (Positive Temperature Coefficient) heater
- Heating capacity: 5.5 kW
- Rapid warm-up function for cold starts
- Integrated seat heating with three-level adjustment
Ventilation System
- Variable-speed blower motor with 12-speed settings
- Maximum airflow: 900 m³/h
- Cabin air filter replacement interval: 15,000 miles or 12 months
- Automatic air quality control with activated charcoal filter
Note: The ventilation system ensures clean and fresh air circulation within the cabin.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
General Specifications
- System Type
- Automatic Climate Control
- Refrigerant Type
- R-1234yf
- Refrigerant Capacity
- 500 ± 20 g
- Compressor Type
- Variable Displacement
- Blower Motor Power
- 200 W
- Airflow Capacity
- 1000 m³/h
Temperature Control
- Temperature Range
- 16°C to 32°C
- Temperature Resolution
- 0.5°C
- Sensor Accuracy
- ±0.5°C
- Auto Mode Response Time
- 5 minutes
Air Distribution
- Vent Modes
-
- Face
- Foot
- Defrost
- Combination
- Airflow Direction Adjustment
- Manual and Automatic
- Defrost Time
- 3 minutes at -20°C
Filters
- Cabin Air Filter Type
- Combination Particle and Activated Carbon
- Cabin Air Filter Part Number
- 64 31 9 388 932
- Replacement interval
- 15,000 miles or 12 months
- Filter Efficiency
- 95% for particles > 0.3 µm
Compressor Specifications
- Compressor Part Number
- 64 51 9 388 933
- Displacement Volume
- 120 cc
- Maximum Pressure
- 30 bar
- Oil Type
- PAG 46
- Oil Capacity
- 150 ± 10 ml
Condenser Specifications
- Condenser Part Number
- 64 51 9 388 934
- Material
- Aluminum
- Surface Area
- 0.45 m²
- Pressure Limit
- 35 bar
Evaporator Specifications
- Evaporator Part Number
- 64 51 9 388 935
- Material
- Aluminum
- Surface Area
- 0.3 m²
- Temperature Drop
- 10°C at max cooling
Blower Motor Specifications
- Blower Motor Part Number
- 64 11 9 388 936
- Voltage
- 12 V
- Current Draw
- 16.7 A
- Speed Range
- 0 to 100% in 10% increments
Diagnostic Specifications
- Diagnostic interface
- OBD-II
- Fault Codes
-
- B1234
- B1235
- B1236
- Self Diagnosis interval
- Every ignition cycle
- Error Log Capacity
- 20 faults
Safety Specifications
- High Pressure Cutoff
- 35 bar
- Low Pressure Cutoff
- 1.5 bar
- Overheat Protection
- 95°C
- Emergency Shutdown
- Automatic at critical limits
Service Information Service
Detailed service requirements and schedules for the HVAC system
- Inspect and replace cabin air filter
- Check refrigerant level and pressure
- Inspect compressor and belt
Ensure all connections are secure and free of leaks
- Flush and recharge refrigerant system
- Inspect condenser and evaporator for debris
- Test blower motor and controls
Use only BMW-approved refrigerant and lubricants
- Replace compressor oil
- Inspect and clean all ducts
- Perform full system diagnostic
Reset system parameters after service
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the refrigerant type and capacity for the 2016-2021 BMW M2 HVAC system?
What is the refrigerant type and capacity for the 2016-2021 BMW M2 HVAC system?
The 2016-2021 BMW M2 HVAC system uses R-1234yf refrigerant, with a total system capacity of approximately 525 grams (± 25 grams). This refrigerant is environmentally friendly and complies with EU regulations.
Q2 How do I reset the HVAC system in my BMW M2?
How do I reset the HVAC system in my BMW M2?
To reset the HVAC system, turn the ignition to the ON position (do not start the engine). Press and hold the front defrost button for 10 seconds until the LED flashes. Release the button, and the system will reset. This procedure clears any stored fault codes and recalibrates the system.
Q3 What is the recommended maintenance interval for the cabin air filter in the BMW M2?
What is the recommended maintenance interval for the cabin air filter in the BMW M2?
The cabin air filter in the BMW M2 should be inspected every 15,000 miles and replaced every 30,000 miles or as needed based on driving conditions. A clogged filter can reduce HVAC efficiency and airflow.
Q4 What are the common symptoms of a failing HVAC blower motor in the BMW M2?
What are the common symptoms of a failing HVAC blower motor in the BMW M2?
Common symptoms include reduced airflow, unusual noises (whining or grinding), intermittent operation, or complete failure of the blower motor. If these symptoms occur, inspect the blower motor, resistor, and wiring harness for faults.
Q5 How does the automatic climate control system work in the BMW M2?
How does the automatic climate control system work in the BMW M2?
The automatic climate control system uses sensors to monitor cabin temperature, sunlight intensity, and humidity. It adjusts fan speed, air distribution, and temperature to maintain the desired comfort level. The system also includes a microfilter to improve air quality.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW M2 HVAC System Overview
Coming SoonDetailed technical overview of the HVAC system, including component locations, specifications, and operational principles.
HVAC Refrigerant Handling Guide
Coming SoonStep-by-step guide for safely handling and recharging the R-1234yf refrigerant in the BMW M2 HVAC system.
Cabin Air Filter Replacement Tutorial
Coming SoonVisual and written instructions for replacing the cabin air filter in the 2016-2021 BMW M2.
Diagnosing HVAC Fault Codes
Coming SoonComprehensive guide to diagnosing and troubleshooting HVAC fault codes using BMW-specific diagnostic tools.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.