BMW M2 2016-2021 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2016-2021 BMW M2. Includes performance metrics, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2016-2021 BMW M2, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
3.0 liters (2979 cc)
Horsepower
365 hp (272 kW)
Torque
343 lb-ft (465 Nm)
Compression Ratio
10.2:1
Fuel Economy
23 mpg (10.2 L/100 km)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Power Output
- Maximum power output: 365 hp (272 kW) at 6500 rpm
- Peak torque: 343 lb-ft (465 Nm) at 1400-5560 rpm
- Redline: 7000 rpm
- Compression ratio: 10.2:1
- Direct fuel injection system
Acceleration
- 0-60 mph (0-97 km/h) in 4.2 seconds (manual transmission)
- 0-60 mph (0-97 km/h) in 4.0 seconds (automatic transmission)
- Top speed: 155 mph (250 km/h) (electronically limited)
- Drag coefficient: 0.34 Cd
Note: Performance figures may vary slightly depending on driving conditions and transmission type.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and cooling systems.
Engine Layout
- Inline-6 cylinder configuration
- Turbocharged with TwinPower Turbo technology
- Aluminum engine block and cylinder head
- Double VANOS variable valve timing
- Valvetronic fully variable valve lift system
Cooling System
- Liquid-cooled intercooler
- High-performance radiator with electric fan
- Oil cooler integrated into the cooling system
- Thermostatically controlled coolant flow
Note: The cooling system is designed to maintain optimal engine temperature under high-performance conditions.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance with environmental standards for the 3.0l-engine.
Fuel and Emissions
Information on fuel efficiency, emissions, and compliance with environmental standards for the 3.0l-engine.
Fuel Efficiency
- City fuel economy: 20 mpg (11.8 L/100 km)
- Highway fuel economy: 27 mpg (8.7 L/100 km)
- Combined fuel economy: 23 mpg (10.2 L/100 km)
- Fuel tank capacity: 13.7 gallons (52 liters)
- Recommended fuel: Premium unleaded (91 octane or higher)
Emissions
- Complies with Euro 6 emissions standards
- Equipped with a particulate filter
- NOx emissions: 0.02 g/km
- CO2 emissions: 199 g/km
Note: Emissions figures are based on standardized testing conditions and may vary in real-world driving.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including oil specifications, service intervals, and common maintenance tasks.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine, including oil specifications, service intervals, and common maintenance tasks.
Oil Specifications
- Recommended oil type: BMW TwinPower Turbo LL-01 5W-30
- Oil capacity: 6.5 liters (6.9 quarts)
- Oil change interval: 10,000 miles (16,000 km) or 12 months
- Oil filter part number: 11 42 7 566 327
Service Intervals
- Spark plug replacement: Every 60,000 miles (96,000 km)
- Air filter replacement: Every 30,000 miles (48,000 km)
- Coolant flush: Every 4 years or 60,000 miles (96,000 km)
- Timing chain inspection: Every 100,000 miles (160,000 km)
Note: Service intervals may vary based on driving conditions and vehicle usage.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- N55B30T0
- Displacement
- 3.0 liters
- Configuration
- Inline-6
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW
- Production Years
- 2016-2021
- Part Number
- 11002404198
Performance Specifications
- Max Power
- 365 hp @ 6500 rpm
- Max Torque
- 369 lb-ft @ 1400-5560 rpm
- Redline
- 7000 rpm
- Compression Ratio
- 10.2:1
- Bore
- 84.0 mm
- Stroke
- 89.6 mm
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13537585279
- Fuel Pump Part Number
- 16148659623
- Fuel Filter Part Number
- 13327707222
Turbocharger System
- Turbo Type
- Twin-scroll turbocharger
- Boost Pressure
- 18.1 psi
- Wastegate Type
- Electronically controlled
- Turbo Part Number
- 11657848977
- intercooler Part Number
- 17117580161
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117580161
- Water Pump Part Number
- 11517586925
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30 or equivalent
- Oil Filter Part Number
- 11427837209
- Oil Pump Part Number
- 11418617809
- Oil Change interval
- 10,000 miles or 12 months
Ignition System
- Spark Plug Type
- NGK SILZKBR8D8S
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138616153
- Spark Plug Torque
- 23 Nm
- Ignition Timing
- Fully electronic, variable
Emissions System
- Catalytic Converter Part Number
- 18307585279
- Oxygen Sensor Part Number
- 11787585279
- Egr System
- Not applicable
- Emissions Standard
- EU6, LEV2
Engine Management
- Ecu Part Number
- 7585252
- Software Version
- I-Level F020-21-03-540
- Diagnostic interface
- OBD-II
- Sensor References
-
- MAP sensor: 13627848977
- MAF sensor: 13627585279
- Crankshaft position sensor: 12147585279
Maintenance Specifications
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain Tensioner Part Number
- 11317585279
- Belt Drive System
- Serpentine belt with automatic tensioner
- Belt Part Number
- 11287585279
- Tensioner Part Number
- 11287585280
- Service interval
- 10,000 miles or 12 months
Diagnostic Specifications
- Fault Codes
-
- P0171 - System too lean
- P0300 - Random/multiple cylinder misfire detected
- P0420 - Catalyst system efficiency below threshold
- Diagnostic Tools
-
- BMW ISTA+
- OBD-II scanner with BMW-specific software
- Common Issues
-
- High-pressure fuel pump failure
- Valve cover gasket leaks
- Turbocharger wastegate rattle
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Oil and filter change
- Inspect and replace air filter if necessary
- Check and top off all fluid levels
- Inspect belts and hoses for wear
Use only BMW-approved fluids and parts
- Replace spark plugs
- Inspect and replace fuel filter if necessary
- Check and adjust valve clearance if applicable
- Inspect turbocharger system for leaks or damage
Perform a full diagnostic scan using BMW ISTA+
- Replace coolant
- Replace serpentine belt and tensioner
- Inspect and replace timing chain components if necessary
- Check and replace oxygen sensors if necessary
Inspect all engine mounts and replace if worn
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower rating of the 3.0L engine in the 2016-2021 BMW M2?
What is the horsepower rating of the 3.0L engine in the 2016-2021 BMW M2?
The 3.0L engine in the 2016-2021 BMW M2 produces 365 horsepower at 6,000 rpm. This engine is designed for high performance and efficiency.
Q2 What is the torque output of the 3.0L engine?
What is the torque output of the 3.0L engine?
The 3.0L engine delivers 369 lb-ft of torque at 4,500 rpm. This ensures strong acceleration and responsiveness.
Q3 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system, optimized for precise fuel delivery and improved combustion efficiency.
Q4 What is the recommended oil type for the 3.0L engine?
What is the recommended oil type for the 3.0L engine?
BMW recommends using BMW-approved synthetic oil with a viscosity of 5W-30 for optimal engine performance and longevity.
Q5 What is the engine displacement of the 3.0L engine?
What is the engine displacement of the 3.0L engine?
The engine displacement is exactly 2,998 cc, which is rounded to 3.0L for classification purposes.
Q6 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio of the 3.0L engine is 10.2:1, designed to balance performance and fuel efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 3.0L Engine Maintenance Guide
Coming SoonComprehensive guide on maintenance procedures, including oil changes, filter replacements, and inspections.
3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications, including dimensions, performance metrics, and component details.
BMW Genuine Parts Catalog
Coming SoonCatalog of genuine BMW parts recommended for the 3.0L engine to ensure proper operation and warranty compliance.
3.0L Engine Safety and Service Warnings
Coming SoonImportant safety warnings and professional service requirements for handling and servicing the 3.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.