BMW 840i 2018-present Body Specifications
Detailed technical specifications and documentation for the body system of the 2018-Present BMW 840i, including structural design, materials, dimensions, and aerodynamics.
Overview Specifications
Comprehensive description of the body specifications for the 2018-Present BMW 840i, including key features, measurements, and technical details.
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Length
4843 mm (190.7 in)
Drag Coefficient
0.29
Trunk Volume
420 liters (14.8 cu ft)
Wheelbase
2822 mm (111.1 in)
Coolant Capacity
12 liters (3.2 gallons)
Available Specifications
Exterior Dimensions
Detailed measurements and specifications of the BMW 840i's exterior dimensions.
Exterior Dimensions
Detailed measurements and specifications of the BMW 840i's exterior dimensions.
Overall Dimensions
- Length: 4843 mm (190.7 in)
- Width: 1902 mm (74.9 in)
- Height: 1341 mm (52.8 in)
- Wheelbase: 2822 mm (111.1 in)
- Track width (front/rear): 1612 mm / 1622 mm (63.5 in / 63.9 in)
Cargo and Trunk Space
- Trunk volume: 420 liters (14.8 cu ft)
- Cargo capacity with rear seats folded: 1200 liters (42.4 cu ft)
- Load width between wheel arches: 1000 mm (39.4 in)
- Load height: 450 mm (17.7 in)
Note: Cargo capacity may vary depending on optional equipment and configuration.
Body Structure and Materials
Technical details about the body construction and materials used in the BMW 840i.
Body Structure and Materials
Technical details about the body construction and materials used in the BMW 840i.
Body Construction
- Hybrid construction combining steel, aluminum, and carbon fiber reinforced plastic (CFRP)
- Weight-saving design with optimized rigidity
- Drag coefficient (Cd): 0.29
- Aerodynamic features include active air flaps and underbody panels
Material Distribution
- Aluminum usage: 45% of body structure
- High-strength steel: 30%
- CFRP components: 10%
- Other materials (plastics, composites): 15%
Note: Material distribution contributes to a 50:50 weight balance.
Exterior Features
Key exterior features and their technical specifications.
Exterior Features
Key exterior features and their technical specifications.
Lighting System
- Full LED headlights with adaptive functionality
- LED daytime running lights
- Automatic high beam assist
- LED rear lights with dynamic turn signals
Wheels and Tires
- Standard wheel size: 19-inch alloy wheels
- Optional wheel sizes: 20-inch and 21-inch
- Tire sizes: 245/40 R19 (front), 275/35 R19 (rear)
- Run-flat tires as standard
Note: Tire sizes may vary depending on wheel and package selection.
Aerodynamics and Cooling
Details about the aerodynamic design and cooling systems.
Aerodynamics and Cooling
Details about the aerodynamic design and cooling systems.
Aerodynamic Design
- Active air flaps in the front grille
- Aerodynamically optimized side mirrors
- Rear spoiler with integrated brake light
- Underbody panels for reduced drag
Cooling System
- Dual-zone cooling system for engine and transmission
- Air curtains for improved airflow
- Radiator size: 600 mm x 400 mm
- Coolant capacity: 12 liters (3.2 gallons)
Note: Cooling system is designed for optimal performance under high loads.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4851 mm
- Overall Width
- 1902 mm
- Overall Height
- 1346 mm
- Wheelbase
- 2822 mm
- Track Width Front
- 1612 mm
- Track Width Rear
- 1620 mm
- Ground Clearance
- 120 mm
Weight
- Curb Weight
- 1795 kg
- Gross Vehicle Weight
- 2300 kg
- Payload Capacity
- 505 kg
- Front Axle Load
- 1020 kg
- Rear Axle Load
- 775 kg
Body Materials
- Roof
- Carbon Fiber Reinforced Plastic (CFRP)
- Hood
- Aluminum
- Doors
- Aluminum with CFRP reinforcement
- Trunk Lid
- Aluminum
- Frame
- High-strength steel with aluminum components
Aerodynamics
- Drag Coefficient
- 0.29 Cd
- Frontal Area
- 2.25 m²
- Air Dam
- Active Air Stream Kidney Grille
- Underbody
- Fully covered with aerodynamic panels
Exterior Features
- Headlights
- Adaptive LED Headlights with BMW Laserlight
- Taillights
- 3D LED Taillights
- Mirrors
- Electrically folding, heated, and auto-dimming
- Sunroof
- Panoramic glass sunroof with electric operation
- Exhaust System
- Dual exhaust with chrome tips
interior Dimensions
- Headroom Front
- 1010 mm
- Headroom Rear
- 950 mm
- Legroom Front
- 1050 mm
- Legroom Rear
- 890 mm
- Shoulder Room Front
- 1480 mm
- Shoulder Room Rear
- 1420 mm
Seating
- Front Seats
- Sport seats with 14-way power adjustment
- Rear Seats
- 40/20/40 split-folding with integrated armrest
- Upholstery
- Vernasca Leather with contrast stitching
- Seat Heating
- Front and rear seats with 3-stage heating
- Seat Memory
- Driver and front passenger memory function
Cargo Capacity
- Trunk Volume
- 420 liters
- Trunk Opening Width
- 1020 mm
- Trunk Opening Height
- 500 mm
- Trunk Floor Material
- Carpeted with storage compartments
- Cargo Anchors
- 4 tie-down hooks
Safety Features
- Airbags
-
- Front airbags
- Side airbags
- Head airbags
- Knee airbags
- Safety Cell
- High-strength steel with crumple zones
- Active Protection
- Pre-collision system with seatbelt pretensioners
- Parking Assist
- Surround View with 3D View
- Lane Departure Warning
- Active Lane Keeping Assist
Maintenance
- Body Wash interval
- Every 2 weeks or as needed
- Waxing Interval
- Every 3 months
- Paint Care
- Use BMW-approved paint care products
- Rust Protection
- Galvanized body with 12-year anti-corrosion warranty
- Glass Cleaning
- Use BMW-approved glass cleaner
Diagnostics
- Body Control Module
- Integrated into the vehicle's central electronics
- Fault Codes
- Readable via BMW ISTA diagnostic system
- Sensor Check
- Regularly check all exterior sensors for obstructions
- Lighting Diagnostics
- Automatic bulb failure detection
- Alignment Check
- Check wheel alignment every 15,000 miles
Service Information Service
Detailed service requirements and schedules for the BMW 840I body
- Inspect and clean exterior body panels
- Check and adjust all exterior lights
- Inspect and lubricate door hinges and locks
- Check and clean sunroof drainage system
Use BMW-approved cleaning products
- Inspect and repair any paint chips or scratches
- Check and replace windshield wiper blades
- Inspect and clean underbody panels
- Check and adjust wheel alignment
Ensure all repairs are performed by a certified BMW technician
- Inspect and replace any worn exterior trim pieces
- Check and replace any damaged exterior sensors
- Inspect and repair any rust spots
- Check and replace any worn door seals
Use only genuine BMW replacement parts
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2018-Present BMW 840i?
What are the exterior dimensions of the 2018-Present BMW 840i?
The 2018-Present BMW 840i has an overall length of 4843 mm, a width of 1902 mm (excluding mirrors), and a height of 1341 mm. The wheelbase measures 2822 mm, providing a balanced stance and spacious interior.
Q2 What materials are used in the body construction of the BMW 840i?
What materials are used in the body construction of the BMW 840i?
The BMW 840i utilizes a combination of high-strength steel, aluminum, and carbon fiber-reinforced plastic (CFRP) in its body construction. This lightweight yet rigid structure enhances performance, fuel efficiency, and safety.
Q3 What is the drag coefficient of the BMW 840i?
What is the drag coefficient of the BMW 840i?
The BMW 840i boasts a drag coefficient (Cd) of 0.29, achieved through aerodynamic design elements such as active air flaps, a flat underbody, and optimized airflow management.
Q4 What is the curb weight of the BMW 840i?
What is the curb weight of the BMW 840i?
The curb weight of the BMW 840i varies by configuration but typically ranges between 1770 kg and 1850 kg, depending on optional equipment and drivetrain specifications.
Q5 Does the BMW 840i feature adaptive suspension?
Does the BMW 840i feature adaptive suspension?
Yes, the BMW 840i is equipped with adaptive suspension as standard, which includes Dynamic Damper Control. This system adjusts damping forces in real-time based on driving conditions and driver preferences.
Q6 What is the ground clearance of the BMW 840i?
What is the ground clearance of the BMW 840i?
The BMW 840i has a ground clearance of approximately 120 mm, ensuring a balance between sporty handling and practicality for everyday driving.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 840i Body Structure Technical Guide
Coming SoonDetailed technical guide on the materials, design, and construction of the BMW 840i body, including crash safety features and aerodynamic enhancements.
Aerodynamics and Performance Optimization
Coming SoonExplore how BMW engineers optimized the 840i's aerodynamics for improved performance and fuel efficiency.
Adaptive Suspension and Driving Dynamics
Coming SoonLearn about the adaptive suspension system and how it enhances driving dynamics and comfort in the BMW 840i.
BMW Genuine Parts and Accessories
Coming SoonOfficial BMW guide to genuine parts and accessories for the 840i, ensuring optimal performance and warranty compliance.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.