BMW 840i 2018-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2018-Present BMW 840i. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2018-Present BMW 840i, including key features, measurements, and technical details.
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 3.0l-engine documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Engine Type
Inline 6-cylinder, Turbocharged
Displacement
2998 cc (3.0 liters)
Power Output
335 hp (250 kW)
Torque
368 lb-ft (500 Nm)
Compression Ratio
11.0:1
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance capabilities of the 3.0l-engine, including power output, torque, and acceleration.
Power and Torque
- Maximum power output: 335 hp (250 kW) at 5500-6500 rpm
- Peak torque: 368 lb-ft (500 Nm) at 1600-4500 rpm
- 0-60 mph acceleration: 4.9 seconds
- Top speed: 155 mph (electronically limited)
Fuel Efficiency
- City fuel economy: 20 mpg
- Highway fuel economy: 29 mpg
- Combined fuel economy: 23 mpg
- Fuel tank capacity: 18.0 gallons
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Layout
- Inline 6-cylinder configuration
- Turbocharged with direct injection
- Aluminum engine block and cylinder head
- Dual overhead camshafts (DOHC)
Cooling System
- Liquid-cooled with electric water pump
- Radiator size: 22.5 x 18.5 inches
- Coolant capacity: 12.7 quarts
- Thermostat opening temperature: 194°F (90°C)
Note: Ensure coolant levels are checked regularly to prevent overheating.
Engine Dimensions
Exact measurements and dimensions of the 3.0l-engine, including weight, size, and displacement.
Engine Dimensions
Exact measurements and dimensions of the 3.0l-engine, including weight, size, and displacement.
Physical Dimensions
- Engine length: 28.3 inches
- Engine width: 24.8 inches
- Engine height: 22.0 inches
- Engine weight: 403 lbs (183 kg)
Displacement and Compression
- Displacement: 2998 cc (3.0 liters)
- Bore: 82.0 mm
- Stroke: 94.6 mm
- Compression ratio: 11.0:1
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations.
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations.
Emissions Standards
- Complies with Euro 6 and ULEV standards
- CO2 emissions: 185 g/km
- NOx emissions: 0.02 g/km
- Particulate filter: Standard
Exhaust System
- Dual exhaust with chrome tips
- Catalytic converter: Close-coupled
- Exhaust diameter: 2.5 inches
- Muffler type: Twin-chamber
Note: Regular inspection of the exhaust system is recommended to ensure compliance with emissions standards.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- B58B30M0
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2018-Present
Performance Specifications
- Max Power
- 335 hp @ 5500-6500 rpm
- Max Torque
- 369 lb-ft @ 1520-4500 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Fuel System
- Direct injection with High Precision Injection (HPI)
- Emission Standard
- EU6, LEV3
Dimensions And Weight
- Engine Length
- 22.8 in
- Engine Width
- 28.3 in
- Engine Height
- 22.4 in
- Dry Weight
- 374 lbs
- Oil Capacity
- 6.5 liters
- Coolant Capacity
- 10.5 liters
Cylinder Head And Valvetrain
- Valve Configuration
- DOHC, 4 valves per cylinder
- Valve Material
- Hollow-stem intake valves, sodium-filled exhaust valves
- Camshaft Drive
- Chain-driven
- Valve Clearance
- Hydraulic lifters, no adjustment required
- Part Number Cylinder Head
- 11-12-8-618-001
Block And internals
- Block Material
- Aluminum with closed-deck design
- Piston Material
- Forged aluminum
- Connecting Rod Material
- Forged steel
- Crankshaft Material
- Forged steel
- Main Bearing Diameter
- 2.362 in
- Rod Bearing Diameter
- 2.047 in
Turbocharger System
- Turbo Type
- Twin-scroll turbocharger
- Boost Pressure
- 18.1 psi
- Wastegate Control
- Electronically controlled
- intercooler Type
- Air-to-water
- Part Number Turbocharger
- 11-62-8-618-002
Lubrication System
- Oil Type
- BMW TwinPower Turbo LL-01 FE 0W-20 or 0W-30
- Oil Pump Type
- Variable displacement vane pump
- Oil Filter Part Number
- 11-42-7-838-001
- Oil Change interval
- 10,000 miles or 12 months
- Oil Pressure
- 43.5-58 psi @ 2000 rpm
Cooling System
- Thermostat Opening Temperature
- 194°F
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor
- Water Pump Type
- Electric
- Radiator Part Number
- 17-11-7-838-003
- Cooling Fan Type
- Electric, PWM-controlled
Ignition System
- Spark Plug Type
- BMW NGK SILZKBR8D8S
- Spark Plug Gap
- 0.028 in
- Ignition Coil Type
- Pencil coil
- Ignition Timing
- Fully variable
- Part Number Ignition Coil
- 12-13-7-838-004
Fuel System
- Fuel Pump Type
- Electric, in-tank
- Fuel Pressure
- 2900 psi
- injector Type
- Solenoid-driven, direct injection
- Part Number Fuel injector
- 13-53-7-838-005
- Fuel Filter Part Number
- 13-32-7-838-006
Maintenance Specifications
- Spark Plug Replacement interval
- 60,000 miles
- Timing Chain Inspection Interval
- 100,000 miles
- Coolant Replacement interval
- 4 years or 50,000 miles
- Air Filter Replacement interval
- 30,000 miles
- Belt Replacement interval
- 60,000 miles
Diagnostic Specifications
- Obd Ii Compliance
- Yes
- Diagnostic interface
- BMW ISTA/D
- Fault Code Reading
- Via OBD-II port or ISTA/D
- Emission Monitoring
- Continuous
- Onboard Diagnostics
- BMW DME 8.8
Service Information Service
Detailed service requirements and schedules for the 3.0l-engine
- Oil and filter change
- Inspect fluid levels
- Check for leaks
- Inspect belts and hoses
Use only BMW-approved fluids and parts
- Replace air filter
- Inspect spark plugs
- Check ignition system
- Inspect fuel system
Replace spark plugs if necessary
- Replace spark plugs
- Inspect timing chain
- Replace coolant
- Inspect turbocharger system
Timing chain inspection is critical for longevity
- Inspect and replace timing chain if necessary
- Replace fuel filter
- Inspect water pump
- Check all engine mounts
Comprehensive engine inspection recommended
Common Questions
Find answers to common questions about torque specifications
Q1 What is the displacement of the 3.0L engine in the BMW 840i?
What is the displacement of the 3.0L engine in the BMW 840i?
The 3.0L engine in the BMW 840i has a displacement of 2998 cc, achieved through a bore of 82 mm and a stroke of 90 mm.
Q2 What is the maximum torque output of the 3.0L engine?
What is the maximum torque output of the 3.0L engine?
The 3.0L engine produces a maximum torque of 450 Nm at 1500-4500 rpm, ensuring strong performance across a wide range of driving conditions.
Q3 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system with electronically controlled injectors, optimizing fuel efficiency and combustion.
Q4 What is the recommended oil grade for the 3.0L engine?
What is the recommended oil grade for the 3.0L engine?
BMW recommends using SAE 5W-30 or 5W-40 synthetic oil for the 3.0L engine, ensuring optimal lubrication and engine protection.
Q5 How often should the 3.0L engine's air filter be replaced?
How often should the 3.0L engine's air filter be replaced?
The air filter should be inspected every 12 months or 15,000 km and replaced if necessary, to maintain engine efficiency and air quality.
Q6 What is the horsepower rating of the 3.0L engine?
What is the horsepower rating of the 3.0L engine?
The 3.0L engine delivers 335 horsepower at 5500 rpm, providing robust power for the BMW 840i.
Q7 Is the 3.0L engine compatible with hybrid technology?
Is the 3.0L engine compatible with hybrid technology?
Yes, the 3.0L engine in the BMW 840i integrates with hybrid technology, enhancing efficiency and reducing emissions.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 840i Engine Maintenance Guide
Coming SoonComprehensive guide detailing maintenance procedures, schedules, and best practices for the 3.0L engine.
3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications including dimensions, performance metrics, and component details.
BMW Genuine Parts Catalog
Coming SoonOfficial catalog of genuine BMW parts recommended for the 3.0L engine to ensure compatibility and performance.
BMW Service Procedures for 3.0L Engine
Coming SoonStep-by-step service procedures for the 3.0L engine, including diagnostics, repairs, and upgrades.
BMW Warranty and Service Policies
Coming SoonInformation on warranty coverage, service policies, and implications for the 3.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.