BMW 760i 2020-present Fuel System Specifications
Detailed technical specifications and maintenance guidelines for the fuel system of the BMW 760I models from 2020 to the present. Essential for accurate diagnostics and efficient repairs.
Overview Specifications
Comprehensive description of the fuel specifications for the 2020-Present BMW 760i, including key features, measurements, and technical details. This guide provides detailed information on fuel requirements, system components, and performance specifications to ensure optimal operation and maintenance.
How to Use
Use the search function to locate specific fuel specifications by entering keywords such as 'octane rating', 'fuel capacity', or 'injection system'.
Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Fuel Type
Premium unleaded gasoline (91 AKI min)
Fuel Tank Capacity
21.9 gallons (83 liters)
Injection Pressure
Up to 350 bar (5076 psi)
EPA Combined Fuel Economy
20 mpg
CO2 Emissions
238 g/km
Available Specifications
Fuel Requirements
This section outlines the fuel type, octane rating, and additives recommended for the BMW 760i to ensure optimal engine performance and longevity.
Fuel Requirements
This section outlines the fuel type, octane rating, and additives recommended for the BMW 760i to ensure optimal engine performance and longevity.
Fuel Type and Octane Rating
- Premium unleaded gasoline with a minimum octane rating of 91 AKI (Anti-Knock Index)
- Recommended octane rating of 93 AKI for maximum performance
- Use of lower octane fuel may result in reduced engine performance and efficiency
- Ethanol content should not exceed 10% (E10)
Fuel Additives
- BMW-approved fuel additives are recommended for maintaining fuel system cleanliness
- Avoid using aftermarket additives not approved by BMW
- Additives should not contain metallic compounds or manganese-based substances
- Regular use of approved additives can help prevent carbon buildup
Note: Using non-approved additives may void the vehicle's warranty.
Fuel System Components
This section provides an overview of the key components of the BMW 760i fuel system, including the fuel tank, fuel pump, and injection system.
Fuel System Components
This section provides an overview of the key components of the BMW 760i fuel system, including the fuel tank, fuel pump, and injection system.
Fuel Tank and Capacity
- Fuel tank capacity: 21.9 gallons (83 liters)
- Material: High-density polyethylene for durability and corrosion resistance
- Includes an integrated fuel level sensor for accurate fuel monitoring
- Designed to minimize evaporative emissions
Fuel Injection System
- Direct fuel injection system with high-pressure injectors
- Injection pressure: Up to 350 bar (5076 psi)
- Precision-controlled injection timing for optimal combustion
- Supports stratified charge operation for improved efficiency
Note: The high-pressure injection system requires regular maintenance to ensure proper operation.
Fuel Efficiency and Performance
This section covers the fuel efficiency, emissions, and performance metrics of the BMW 760i, including EPA ratings and engine output.
Fuel Efficiency and Performance
This section covers the fuel efficiency, emissions, and performance metrics of the BMW 760i, including EPA ratings and engine output.
Fuel Efficiency
- EPA-estimated fuel economy: 17 mpg city / 25 mpg highway
- Combined fuel economy: 20 mpg
- Range: Approximately 438 miles on a full tank
- Eco Pro mode available for improved fuel efficiency
Emissions and Environmental Impact
- Complies with Euro 6d-TEMP emissions standards
- CO2 emissions: 238 g/km
- Equipped with a particulate filter to reduce emissions
- Start-stop function reduces fuel consumption during idle
Note: Regular maintenance of the emissions system is required to maintain compliance.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Fuel Type
- Recommended Fuel
- Premium unleaded gasoline (91 AKI or 95 RON minimum)
- Alternative Fuel
- Regular unleaded gasoline (87 AKI or 91 RON) with reduced performance
- Ethanol Content
- Up to 10% ethanol (E10)
- Notes
- Using fuel with higher ethanol content may void warranty and damage the fuel system
Fuel Tank
- Capacity
- 21.9 gallons (83 liters)
- Material
- High-density polyethylene with integrated fuel pump module
- Part Number
- 16117359901
- Pressure Rating
- 3.5 bar (50.8 psi)
- Cross Reference
- Fuel level sensor (part number: 16137359902)
Fuel Pump
- Type
- Electric in-tank fuel pump
- Flow Rate
- 120 liters per hour (31.7 gallons per hour)
- Operating Pressure
- 5.0 bar (72.5 psi)
- Part Number
- 16117359903
- Voltage
- 12V DC
- Current Draw
- 8.5A max
Fuel injectors
- Type
- Direct injection high-pressure injectors
- Flow Rate
- 15.5 cc/min at 3.0 bar
- Operating Pressure
- 200 bar (2900 psi)
- Part Number
- 13537589901
- Spray Pattern
- 6-hole multi-stream
- Tolerance
- ±2% flow variation
Fuel Filter
- Type
- Integrated fuel filter with water separator
- Replacement interval
- Every 30,000 miles or 24 months
- Part Number
- 16117359904
- Filtration Rating
- 10 microns
- Notes
- Non-serviceable, replace as part of fuel pump module
Fuel Pressure Regulator
- Type
- Mechanical diaphragm regulator
- Operating Pressure
- 5.0 bar (72.5 psi)
- Part Number
- 13537589902
- Location
- Integrated into fuel rail
- Tolerance
- ±0.2 bar
Fuel Rail
- Material
- Stainless steel
- Pressure Rating
- 250 bar (3625 psi)
- Part Number
- 13537589903
- Cross Reference
- High-pressure fuel pump (part number: 13537589904)
- Notes
- Includes integrated pressure sensor
High Pressure Fuel Pump
- Type
- Cam-driven mechanical pump
- Operating Pressure
- 200 bar (2900 psi)
- Part Number
- 13537589904
- Flow Rate
- 1.2 liters per minute at 200 bar
- Tolerance
- ±5% pressure variation
- Notes
- Lubricated by engine oil
Fuel System Diagnostics
- Diagnostic Trouble Codes
-
- P0171 - System too lean
- P0172 - System too rich
- P0087 - Fuel rail/system pressure too low
- P0088 - Fuel rail/system pressure too high
- Diagnostic Tool
- BMW ISTA or compatible OBD-II scanner
- Pressure Test
- Required for P0087/P0088 codes
- Leak Test
- Required for P0171/P0172 codes
- Notes
- Use BMW-specific diagnostic software for accurate readings
Fuel System Maintenance
- inspection Interval
- Every 15,000 miles or 12 months
- Checks
-
- Inspect fuel lines for leaks or damage
- Check fuel pressure using ISTA diagnostic tool
- Verify fuel injector operation
- Inspect fuel tank for damage or contamination
- Notes
- Replace fuel filter as part of fuel pump module service
Service Information Service
Detailed service requirements and schedules for the fuel system
- Inspect fuel system for leaks
- Check fuel pressure
- Verify injector operation
Use BMW-approved diagnostic tools
- Replace fuel filter (if applicable)
- Inspect high-pressure fuel pump
- Check fuel rail pressure sensor
Non-serviceable fuel filter requires fuel pump module replacement
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What type of fuel is recommended for the 2020-Present BMW 760i?
What type of fuel is recommended for the 2020-Present BMW 760i?
The BMW 760i requires premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher. Using lower-octane fuel may result in reduced performance and efficiency.
Q2 What is the fuel tank capacity of the BMW 760i?
What is the fuel tank capacity of the BMW 760i?
The BMW 760i has a fuel tank capacity of 21.1 gallons (80 liters). This allows for extended driving ranges, especially when combined with the vehicle's efficient V12 engine.
Q3 Can I use ethanol-blended fuel in the BMW 760i?
Can I use ethanol-blended fuel in the BMW 760i?
Yes, the BMW 760i is compatible with ethanol-blended fuels containing up to 10% ethanol (E10). However, fuels with higher ethanol concentrations, such as E85, are not recommended and may cause engine damage.
Q4 What is the fuel economy of the BMW 760i?
What is the fuel economy of the BMW 760i?
The BMW 760i achieves an EPA-estimated fuel economy of 13 mpg in the city, 20 mpg on the highway, and 15 mpg combined. Actual mileage may vary based on driving conditions and habits.
Q5 Does the BMW 760i have a fuel-saving start-stop system?
Does the BMW 760i have a fuel-saving start-stop system?
Yes, the BMW 760i is equipped with an Auto Start-Stop function that temporarily shuts off the engine when the vehicle is stationary, such as at traffic lights, to reduce fuel consumption and emissions.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW Fuel System Overview
Coming SoonLearn about the advanced fuel system in the BMW 760i, including injection technology and efficiency features.
Fuel Quality and Performance Guide
Coming SoonUnderstand how fuel quality impacts the performance and longevity of your BMW 760i's engine.
BMW Maintenance Schedule for Fuel System
Coming SoonAccess the recommended maintenance schedule for the fuel system to ensure optimal performance and reliability.
Troubleshooting Fuel-Related Issues
Coming SoonFind solutions to common fuel-related problems, such as poor fuel economy or engine misfires.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.