BMW 760i 2020-present 6.6L Engine Specifications
Explore detailed technical specifications and documentation for the 6.6L V12 twin-turbocharged engine in the 2020-Present BMW 760i. Learn about performance metrics, engine components, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 6.6l-engine specifications for the 2020-Present BMW 760I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 6.6l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections listed below.
Key Specifications
Displacement
6.6 liters
Horsepower
601 hp @ 5,500 rpm
Torque
590 lb-ft @ 1,600-4,500 rpm
Compression Ratio
10.5:1
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Performance
Detailed information on the performance capabilities of the 6.6l-engine, including power output, torque, and acceleration metrics.
Engine Performance
Detailed information on the performance capabilities of the 6.6l-engine, including power output, torque, and acceleration metrics.
Power Output
- Maximum horsepower: 601 hp @ 5,500 rpm
- Peak torque: 590 lb-ft @ 1,600-4,500 rpm
- Top speed: Electronically limited to 155 mph (250 km/h)
- 0-60 mph acceleration: 3.6 seconds
Fuel Efficiency
- City fuel economy: 13 mpg
- Highway fuel economy: 22 mpg
- Combined fuel economy: 16 mpg
- Fuel tank capacity: 21.1 gallons
Note: Fuel efficiency may vary based on driving conditions and load.
Engine Design
Technical details about the design and construction of the 6.6l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details about the design and construction of the 6.6l-engine, including materials, layout, and cooling systems.
Engine Layout
- V12 configuration with 6.6-liter displacement
- Aluminum alloy block and cylinder heads
- Dual overhead camshafts (DOHC)
- Direct fuel injection system
Cooling System
- Liquid-cooled with dual radiators
- Electric water pump for efficient cooling
- Thermostatically controlled cooling system
- Coolant capacity: 12.7 liters
Note: The cooling system is designed to maintain optimal engine temperature under all driving conditions.
Emissions and Compliance
Information on the engine's emissions standards, exhaust system, and compliance with environmental regulations.
Emissions and Compliance
Information on the engine's emissions standards, exhaust system, and compliance with environmental regulations.
Exhaust System
- Dual exhaust with quad tailpipes
- Catalytic converters for reduced emissions
- Particulate filter for cleaner exhaust
- Exhaust gas recirculation (EGR) system
Emissions Standards
- Complies with Euro 6d-TEMP emissions standards
- CO2 emissions: 294 g/km
- NOx emissions: 0.03 g/km
- Particulate matter emissions: 0.001 g/km
Note: The engine meets stringent global emissions standards for reduced environmental impact.
Maintenance and Service
Guidelines for maintaining and servicing the 6.6l-engine, including oil specifications, service intervals, and common maintenance tasks.
Maintenance and Service
Guidelines for maintaining and servicing the 6.6l-engine, including oil specifications, service intervals, and common maintenance tasks.
Oil Specifications
- Recommended oil type: BMW TwinPower Turbo 5W-30
- Oil capacity: 9.5 liters
- Oil change interval: 10,000 miles or 12 months
- Oil filter part number: 11 42 7 566 327
Service Intervals
- Spark plug replacement: Every 60,000 miles
- Air filter replacement: Every 30,000 miles
- Coolant flush: Every 100,000 miles
- Timing chain inspection: Every 75,000 miles
Note: Adhere to BMW's recommended service intervals to ensure optimal engine performance and longevity.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Type
- V12 TwinPower Turbo
- Displacement
- 6.6 liters (6592 cc)
- Configuration
- 60-degree V12
- Bore
- 89.0 mm
- Stroke
- 88.3 mm
- Compression Ratio
- 10.5:1
- Engine Code
- N74B66
Performance
- Max Power
- 601 hp @ 5500 rpm
- Max Torque
- 627 lb-ft @ 1600-4500 rpm
- Redline
- 6500 rpm
- Acceleration 0 60
- 3.6 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- Fuel Type
- Premium unleaded gasoline (91 octane or higher)
- injection Type
- Direct injection
- Fuel Pump Pressure
- 2900 psi (200 bar)
- Fuel Filter Part Number
- 13 32 8 618 789
- Fuel injector Part Number
- 13 64 8 618 790
Cooling System
- Coolant Capacity
- 12.5 liters
- Thermostat Opening Temperature
- 97°C (206.6°F)
- Radiator Part Number
- 17 11 8 618 791
- Water Pump Part Number
- 11 51 8 618 792
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor
Lubrication System
- Oil Capacity
- 9.5 liters (with filter)
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30
- Oil Filter Part Number
- 11 42 8 618 793
- Oil Pump Type
- Variable displacement
- Oil Pressure
- 2.5-4.5 bar at 2000 rpm
Ignition System
- Spark Plug Type
- BMW NGK SILZKBR8D8S
- Spark Plug Gap
- 0.8 mm
- Ignition Coil Part Number
- 12 13 8 618 794
- Ignition Timing
- Fully electronic with knock control
Emissions
- Emission Standard
- Euro 6d-TEMP
- Catalytic Converter Part Number
- 18 30 8 618 795
- Oxygen Sensor Part Number
- 11 78 8 618 796
- Particulate Filter
- Yes
- Evaporative Emissions System
- Sealed system with charcoal canister
Turbocharger System
- Turbo Type
- Twin-scroll turbochargers
- Boost Pressure
- 1.2 bar
- Wastegate Control
- Electronic
- intercooler Type
- Air-to-water
- Turbocharger Part Number
- 11 64 8 618 797
Engine Management
- Ecu Type
- Bosch MEVD17.2
- Software Version
- V12.3.1
- Diagnostic interface
- OBD-II
- Sensor integration
- Knock sensors, camshaft position sensors, crankshaft position sensor
Maintenance
- Spark Plug Replacement interval
- 60,000 miles
- Oil Change interval
- 10,000 miles or 12 months
- Air Filter Replacement interval
- 30,000 miles
- Fuel Filter Replacement interval
- 60,000 miles
- Timing Chain Inspection Interval
- 100,000 miles
Diagnostics
- Fault Code Readout
- Via OBD-II port
- Common Fault Codes
-
- P0300
- P0171
- P0299
- Diagnostic Tools
-
- BMW ISTA
- Autologic
- Sensor Tolerances
- Oxygen Sensor: ±5%Camshaft Position Sensor: ±2 degreesCrankshaft Position Sensor: ±1 degree
Service Information Service
Detailed service requirements and schedules for the 6.6L V12 engine
- Engine oil and filter change
- Inspect cooling system for leaks
- Check and top off all fluid levels
Use only BMW-approved fluids and parts
- Replace engine air filter
- Inspect spark plugs
- Check turbocharger system for leaks
Inspect for any signs of wear or damage
- Replace spark plugs
- Replace fuel filter
- Inspect timing chain and tensioners
Perform thorough engine diagnostics
- Replace timing chain and guides
- Inspect and replace water pump if necessary
- Replace coolant
Major service interval, comprehensive inspection required
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 6.6L V12 engine in the 2020-Present BMW 760i?
What is the horsepower and torque output of the 6.6L V12 engine in the 2020-Present BMW 760i?
The 6.6L V12 engine in the BMW 760i produces 601 horsepower at 5,500 rpm and 590 lb-ft of torque at 1,600 rpm. This engine is paired with an 8-speed Steptronic automatic transmission for optimal performance.
Q2 What type of fuel system does the 6.6L V12 engine use?
What type of fuel system does the 6.6L V12 engine use?
The 6.6L V12 engine utilizes a direct fuel injection system, which ensures precise fuel delivery for improved efficiency and performance. It is designed to run on premium unleaded gasoline with an octane rating of 91 or higher.
Q3 What is the recommended oil type and capacity for the 6.6L V12 engine?
What is the recommended oil type and capacity for the 6.6L V12 engine?
The 6.6L V12 engine requires fully synthetic BMW TwinPower Turbo oil, meeting BMW Longlife-01 or Longlife-14 FE+ specifications. The oil capacity is approximately 9.5 liters (10 quarts), including the oil filter.
Q4 What is the service interval for the 6.6L V12 engine?
What is the service interval for the 6.6L V12 engine?
The recommended service interval for the 6.6L V12 engine is every 10,000 miles or 12 months, whichever comes first. This includes oil changes, filter replacements, and inspections of critical components such as the cooling system and spark plugs.
Q5 Does the 6.6L V12 engine feature any advanced cooling systems?
Does the 6.6L V12 engine feature any advanced cooling systems?
Yes, the 6.6L V12 engine is equipped with a dual-circuit cooling system, which includes separate cooling circuits for the engine block and cylinder heads. This ensures optimal thermal management and prevents overheating under high-performance conditions.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 760i Owner's Manual
Coming SoonThe official owner's manual for the BMW 760i, providing detailed information on vehicle operation, maintenance schedules, and technical specifications.
6.6L V12 Engine Technical Overview
Coming SoonA comprehensive technical guide covering the design, features, and performance specifications of the 6.6L V12 engine.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine replacement parts for the 6.6L V12 engine and other vehicle components.
BMW Service and Maintenance Guide
Coming SoonA detailed guide outlining recommended service procedures, maintenance schedules, and safety precautions for the BMW 760i.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.