BMW 760i 2009-2015

BMW 760i 2009-2015 Body Specifications

Detailed technical specifications for the body system of the 2009-2015 BMW 760i, including structural components, exterior dimensions, and material details.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the body specifications for the 2009-2015 BMW 760i, including key features, measurements, and technical details

How to Use

Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'aerodynamics'.

Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.

Key Specifications

Length

5212 mm

Curb Weight

2270 kg

Drag Coefficient

0.29

Torsional Rigidity

32,000 Nm/deg

Wheelbase

3210 mm

Available Specifications

Exterior Dimensions

Detailed measurements and specifications of the exterior body dimensions for the BMW 760i

Overall Dimensions

Length: 5212 mm
Width: 1902 mm
Height: 1478 mm
Wheelbase: 3210 mm
Track width (front/rear): 1607 mm / 1627 mm

Weight Distribution

Curb weight: 2270 kg
Front axle weight: 52%
Rear axle weight: 48%
Gross vehicle weight: 2680 kg
Payload capacity: 410 kg

Note: Weight distribution is optimized for balanced handling and performance.

Body Materials and Construction

Information on the materials and construction techniques used in the body of the BMW 760i

Material Composition

High-strength steel: 60%
Aluminum: 30%
Composite materials: 10%
Magnesium components: 5%
Thermoplastic exterior panels

Construction Techniques

Laser welding for precise seams
Adhesive bonding for enhanced rigidity
Hydroforming for lightweight structural components
Hot-stamped steel for crash zones

Note: Advanced construction techniques ensure superior safety and durability.

Aerodynamics and Design Features

Details on the aerodynamic design and features of the BMW 760i body

Aerodynamic Performance

Drag coefficient (Cd): 0.29
Active air vents for optimized cooling
Underbody panels for reduced drag
Aerodynamically optimized side mirrors
Rear spoiler for improved downforce

Design Features

LED headlights with adaptive functionality
Panoramic sunroof with power tilt/slide
Automatic soft-close doors
Chrome exterior accents
Integrated rear diffuser

Note: Design features combine aesthetics with functional performance.

Safety and Structural Integrity

Information on the safety features and structural integrity of the BMW 760i body

Crash Safety

Front and rear crumple zones
Reinforced passenger cell
Side-impact protection beams
Dual-stage airbags for front occupants
Knee airbags for driver and front passenger

Structural Integrity

Torsional rigidity: 32,000 Nm/deg
Multi-phase steel in critical areas
Energy-absorbing front and rear structures
Rigid roof frame for rollover protection
Integrated side-impact protection

Note: Structural design prioritizes occupant safety and vehicle stability.

Search Specifications

Search by specification name, value, or description

Component Specifications

Dimensions

Overall Length: 5212 mm

Overall Width: 1902 mm

Overall Height: 1478 mm

Wheelbase: 3210 mm

Track Width Front: 1605 mm

Track Width Rear: 1627 mm

Ground Clearance: 120 mm

Weight

Curb Weight: 2270 kg

Gross Vehicle Weight: 2780 kg

Payload Capacity: 510 kg

Front Axle Load: 1250 kg

Rear Axle Load: 1530 kg

Body Materials

Body Structure: Steel and aluminum hybrid construction

Hood: Aluminum

Trunk Lid: Aluminum

Doors: Aluminum outer panels with steel frames

Roof: Steel with optional carbon fiber reinforced polymer (CFRP)

Aerodynamics

Drag Coefficient: 0.29 Cd

Frontal Area: 2.38 m²

Air Resistance: 0.69 m²

Exterior Features

Headlights: Adaptive LED headlights with automatic leveling

Taillights: LED with dynamic turn signals

Mirrors: Electrically adjustable, heated, and auto-dimming

Sunroof: Panoramic glass sunroof with power tilt and slide

Wipers: Rain-sensing windshield wipers

interior Dimensions

Headroom Front: 1020 mm

Headroom Rear: 980 mm

Legroom Front: 1080 mm

Legroom Rear: 950 mm

Shoulder Room Front: 1520 mm

Shoulder Room Rear: 1500 mm

Cargo Capacity

Trunk Volume: 500 liters

Trunk Width: 1050 mm

Trunk Depth: 1100 mm

Trunk Height: 500 mm

Fold Down Rear Seats: Yes, 40/20/40 split

Safety Features

Airbags

Front airbags
Side airbags
Head protection airbags
Knee airbags

Seatbelts: 3-point seatbelts with pretensioners and force limiters

Crash Structure: High-strength steel safety cell

Active Protection: Active headrests and rollover protection

Body Panels

Front Bumper: Part Number: 51118069745
Material: Thermoplastic
Weight: 8.5 kg

Rear Bumper: Part Number: 51128069746
Material: Thermoplastic
Weight: 9.2 kg

Fenders: Front: Part Number: 51137069747, Material: Aluminum, Weight: 4.3 kg
Rear: Part Number: 51147069748, Material: Aluminum, Weight: 4.5 kg

Maintenance

Body Wash interval: Every 2 weeks or as needed

Waxing Interval: Every 3 months

Paint Care: Use BMW-approved paint cleaner and polish

Rust Protection: Annual inspection and treatment recommended

Sealant Replacement: Every 5 years or as needed

Service Information Service

Detailed service requirements and schedules for the body components

5000 miles

6 months

Inspect body for damage or corrosion
Check and clean exterior lights
Lubricate door hinges and locks

Regular inspection helps maintain body integrity and appearance

15000 miles

12 months

Inspect and clean sunroof seals
Check windshield wiper blades for wear
Inspect and adjust door alignment

Ensure all seals and moving parts are functioning properly

30000 miles

24 months

Inspect and replace worn body seals
Check and tighten all body panel fasteners
Inspect and repair any paint chips or scratches

Address any wear and tear to prevent further damage

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the exterior dimensions of the 2009-2015 BMW 760i?

The 2009-2015 BMW 760i has an overall length of 200.7 inches, a width of 74.9 inches (excluding mirrors), and a height of 58.3 inches. The wheelbase measures 120.7 inches, providing a spacious interior.

What materials are used in the body construction of the BMW 760i?

The BMW 760i features a lightweight yet rigid body structure made from high-strength steel, aluminum, and magnesium alloys. The hood, doors, and front fenders are constructed from aluminum to reduce weight and improve performance.

What is the drag coefficient of the BMW 760i?

The BMW 760i has a drag coefficient (Cd) of 0.30, which contributes to its aerodynamic efficiency and fuel economy. This is achieved through careful design of the body contours, underbody panels, and air ducts.

What is the curb weight of the BMW 760i?

The curb weight of the BMW 760i is approximately 4,960 lbs (2,250 kg). This weight includes all standard equipment, fluids, and a full tank of fuel.

What type of paint and finish options are available for the BMW 760i?

The BMW 760i offers a range of high-quality paint finishes, including metallic and non-metallic options. The paint is applied using a multi-layer process, including a base coat, color coat, and clear coat for durability and a high-gloss finish.

What are the ground clearance and approach/departure angles of the BMW 760i?

The BMW 760i has a ground clearance of 5.5 inches. The approach angle is 14.5 degrees, and the departure angle is 15.2 degrees, making it suitable for urban and highway driving but not for off-road use.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW 760i Body Repair Manual

Coming Soon

Official repair manual for the body structure, including panel replacement, alignment, and corrosion protection procedures.

Paint and Finish Care Guide

Coming Soon

Detailed guide on maintaining the paint and finish of your BMW 760i, including cleaning, polishing, and touch-up techniques.

Aerodynamics and Body Design Overview

Coming Soon

Technical overview of the aerodynamic features and body design principles used in the BMW 760i.

Lightweight Materials in BMW Construction

Coming Soon

Explains the use of aluminum, magnesium, and high-strength steel in the BMW 760i's body construction.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.