BMW 760i 2009-2015 ZF 6HP Transmission Specifications
Comprehensive technical specifications for the ZF-6HP automatic transmission system used in the 2009-2015 BMW 760i. This document covers gear ratios, torque capacity, fluid requirements, shift patterns, and diagnostic codes specific to the ZF-6HP transmission.
Overview Specifications
Comprehensive description of the zf-6hp-transmission specifications for the 2009-2015 bmw 760I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific zf-6hp-transmission specifications by entering keywords such as 'torque capacity', 'gear ratios', or 'fluid capacity'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections: General Specifications, Gear Ratios, Torque Capacity, and Maintenance Requirements.
Key Specifications
Transmission Type
6-speed automatic
Maximum Torque Capacity
750 Nm
Fluid Capacity
9.5 liters
Weight (Dry)
98 kg
Fluid Change Interval
60,000 miles
Available Specifications
General Specifications
This section covers the basic technical details and measurements of the zf-6hp-transmission.
General Specifications
This section covers the basic technical details and measurements of the zf-6hp-transmission.
Transmission Type and Configuration
- 6-speed automatic transmission
- Longitudinal mounting configuration
- Electronically controlled with adaptive shift programming
- Includes torque converter with lock-up clutch
Physical Dimensions and Weight
- Length: 720 mm
- Width: 520 mm
- Height: 380 mm
- Weight: 98 kg (dry)
Note: Dimensions may vary slightly depending on installation configuration.
Gear Ratios
This section provides detailed information about the gear ratios and their corresponding speeds.
Gear Ratios
This section provides detailed information about the gear ratios and their corresponding speeds.
Forward Gear Ratios
- 1st Gear: 4.171:1
- 2nd Gear: 2.340:1
- 3rd Gear: 1.521:1
- 4th Gear: 1.143:1
- 5th Gear: 0.867:1
- 6th Gear: 0.691:1
Reverse Gear Ratio
- Reverse Gear: 3.403:1
Torque Capacity
This section outlines the torque handling capabilities of the zf-6hp-transmission.
Torque Capacity
This section outlines the torque handling capabilities of the zf-6hp-transmission.
Maximum Torque Capacity
- Rated torque capacity: 750 Nm
- Peak torque capacity: 800 Nm (short-term)
- Designed for high-performance applications
Torque Converter Specifications
- Lock-up clutch engagement speed: 1800 rpm
- Torque multiplication ratio: 2.0:1
- Fluid coupling efficiency: 92%
Note: Torque converter performance may vary under extreme conditions.
Maintenance Requirements
This section details the maintenance intervals and fluid specifications for the zf-6hp-transmission.
Maintenance Requirements
This section details the maintenance intervals and fluid specifications for the zf-6hp-transmission.
Fluid Specifications
- Transmission fluid type: ZF Lifeguard 6
- Fluid capacity: 9.5 liters
- Fluid change interval: 60,000 miles or 100,000 km
Service Intervals
- Inspect transmission fluid level every 15,000 miles
- Replace transmission filter every 60,000 miles
- Check for leaks and wear during routine maintenance
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Transmission Specifications
General information
- Transmission Type
- 6-speed automatic
- Manufacturer
- ZF Friedrichshafen AG
- Model
- 6HP26
- Application
- 2009-2015 BMW 760i
- Part Number
- 24 11 7 561 123
- Oil Type
- BMW ATF-1 (Shell M-1375.4)
Dimensions And Weight
- Length
- 650 mm
- Width
- 450 mm
- Height
- 350 mm
- Weight
- 98 kg (dry)
- Fluid Capacity
- 9.5 liters
Gear Ratios
- 1st Gear
- 4.171:1
- 2nd Gear
- 2.340:1
- 3rd Gear
- 1.521:1
- 4th Gear
- 1.143:1
- 5th Gear
- 0.867:1
- 6th Gear
- 0.691:1
- Reverse Gear
- 3.403:1
Torque Capacity
- Maximum input Torque
- 600 Nm
- Maximum Output Torque
- 3000 Nm
- Torque Converter Stall Torque
- 2.2:1
Operational Parameters
- Maximum Engine Speed
- 7000 rpm
- Maximum Transmission Temperature
- 120°C
- Minimum Operating Temperature
- -40°C
- Shift Response Time
- 150 ms
Fluid Specifications
- Fluid Type
- BMW ATF-1 (Shell M-1375.4)
- Fluid Change interval
- 60,000 miles or 48 months
- Fluid Viscosity
- 6.8 cSt at 100°C
- Fluid Pressure
- 3.5-4.5 bar
Electronic Control
- Control Module
- EGS (Electronic Transmission Control)
- Sensors
-
- Input speed sensor
- Output speed sensor
- Transmission fluid temperature sensor
- Turbine speed sensor
- Actuators
-
- Solenoid valves
- Pressure control valves
- Shift valves
Maintenance Specifications
- Filter Replacement interval
- 60,000 miles or 48 months
- Seal Replacement interval
- 100,000 miles or 84 months
- Pan Gasket Replacement interval
- 100,000 miles or 84 months
- Torque Converter Drain Interval
- 100,000 miles or 84 months
Diagnostic Specifications
- Diagnostic Tool
- BMW ISTA/D
- Fault Codes
-
- P0700 - Transmission Control System Malfunction
- P0715 - Input/Turbine Speed Sensor Circuit Malfunction
- P0720 - Output Speed Sensor Circuit Malfunction
- P0741 - Torque Converter Clutch Circuit Performance or Stuck Off
- Diagnostic Procedures
-
- Check transmission fluid level and condition
- Inspect wiring and connectors
- Perform solenoid valve resistance test
- Check for stored fault codes
Safety information
- Warning
- Always disconnect the battery before performing any transmission service
- Precautions
-
- Use only BMW-approved transmission fluid
- Ensure proper torque specifications during reassembly
- Avoid contamination of transmission components
Service Information Service
Detailed service requirements and schedules for the ZF-6HP transmission
- Transmission fluid and filter change
- Inspect transmission mounts
- Check for leaks and damage
Use only BMW-approved ATF-1 fluid
- Replace transmission seals
- Replace pan gasket
- Drain and refill torque converter
Inspect and replace worn components as necessary
Common Questions
Find answers to common questions about torque specifications
Q1 What is the fluid capacity of the ZF-6HP transmission in a 2009-2015 BMW 760i?
What is the fluid capacity of the ZF-6HP transmission in a 2009-2015 BMW 760i?
The ZF-6HP transmission in the 2009-2015 BMW 760i has a fluid capacity of approximately 9.5 liters (10 quarts) when performing a complete fluid change, including the torque converter. Always refer to the manufacturer's specifications for exact measurements.
Q2 What type of transmission fluid is recommended for the ZF-6HP transmission?
What type of transmission fluid is recommended for the ZF-6HP transmission?
The ZF-6HP transmission requires ZF Lifeguard 6 or an equivalent ATF meeting ZF TE-ML 14A specification. Using incorrect fluid can lead to transmission damage and void the warranty.
Q3 How often should the transmission fluid be changed in the ZF-6HP transmission?
How often should the transmission fluid be changed in the ZF-6HP transmission?
BMW recommends a transmission fluid and filter change every 60,000 to 100,000 miles under normal driving conditions. Severe driving conditions, such as frequent towing or stop-and-go traffic, may require more frequent service intervals.
Q4 What are the symptoms of a failing ZF-6HP transmission?
What are the symptoms of a failing ZF-6HP transmission?
Common symptoms include harsh or delayed shifting, slipping gears, transmission fluid leaks, unusual noises (e.g., whining or grinding), and the illumination of the transmission warning light. Immediate professional diagnosis is recommended.
Q5 Can the ZF-6HP transmission be repaired, or does it need to be replaced?
Can the ZF-6HP transmission be repaired, or does it need to be replaced?
The ZF-6HP transmission is repairable, and many issues can be resolved by replacing specific components such as solenoids, valve bodies, or seals. However, severe internal damage may require a complete transmission replacement.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
ZF-6HP Transmission Service Manual
Coming SoonOfficial ZF service manual for the 6HP transmission, including detailed repair procedures, torque specifications, and diagnostic steps.
BMW 760i Owner's Manual
Coming SoonThe official owner's manual for the 2009-2015 BMW 760i, providing maintenance schedules and transmission care guidelines.
ZF Lifeguard 6 Fluid Specifications
Coming SoonTechnical data sheet for ZF Lifeguard 6 transmission fluid, including compatibility and performance details.
Common ZF-6HP Transmission Issues
Coming SoonA guide to identifying and troubleshooting common problems with the ZF-6HP transmission in BMW vehicles.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.