BMW 760i 2009-2015 6.0L Engine Specifications
Detailed technical specifications and documentation for the 6.0L V12 N74 engine in the 2009-2015 BMW 760i. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 6.0l-engine specifications for the 2009-2015 BMW 760I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 6.0l-engine specifications by entering keywords such as 'torque', 'displacement', or 'fuel system'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Engine Displacement
6.0 liters (5972 cc)
Maximum Power
544 hp (405 kW) at 5250 rpm
Peak Torque
553 lb-ft (750 Nm) at 1500-5000 rpm
Compression Ratio
10.5:1
Fuel Consumption
13 mpg city / 20 mpg highway
Available Specifications
Engine Design and Architecture
Details about the design, layout, and architecture of the 6.0l-engine
Engine Design and Architecture
Details about the design, layout, and architecture of the 6.0l-engine
Engine Configuration
- V12 configuration with 60-degree bank angle
- Aluminum alloy engine block and cylinder heads
- Dual overhead camshafts (DOHC) with variable valve timing
- Direct fuel injection system with high-pressure injectors
Displacement and Compression
- Engine displacement: 6.0 liters (5972 cc)
- Bore x Stroke: 89.0 mm x 80.0 mm
- Compression ratio: 10.5:1
- Cylinder spacing: 91.0 mm
Note: The high compression ratio enhances fuel efficiency and performance.
Performance Specifications
Technical details about the engine's performance capabilities
Performance Specifications
Technical details about the engine's performance capabilities
Power and Torque
- Maximum power output: 544 hp (405 kW) at 5250 rpm
- Peak torque: 553 lb-ft (750 Nm) at 1500-5000 rpm
- Redline: 6500 rpm
- 0-60 mph acceleration: 4.5 seconds
Fuel System and Efficiency
- Fuel type: Premium unleaded gasoline (91 octane or higher)
- Fuel delivery: Direct injection with Bosch HDEV 5.2 system
- Fuel consumption: 13 mpg city / 20 mpg highway
- CO2 emissions: 388 g/km
Note: The direct injection system optimizes fuel delivery for improved efficiency.
Cooling and Lubrication
Details about the engine's cooling and lubrication systems
Cooling and Lubrication
Details about the engine's cooling and lubrication systems
Cooling System
- Liquid-cooled with dual electric radiator fans
- Coolant capacity: 12.5 liters (13.2 quarts)
- Thermostat opening temperature: 97°C (207°F)
- Coolant type: BMW-approved ethylene glycol-based coolant
Lubrication System
- Wet sump lubrication system
- Oil capacity: 9.5 liters (10 quarts)
- Oil type: BMW Longlife-01 5W-30 synthetic oil
- Oil change interval: 15,000 miles or 12 months
Note: Regular oil changes are critical to maintaining engine performance and longevity.
Emissions and Exhaust
Technical details about the engine's emissions control and exhaust system
Emissions and Exhaust
Technical details about the engine's emissions control and exhaust system
Emissions Control
- Complies with Euro 5 and ULEV II emissions standards
- Dual catalytic converters with oxygen sensors
- Exhaust gas recirculation (EGR) system
- Onboard diagnostics (OBD-II) compliant
Exhaust System
- Dual stainless steel exhaust system
- Exhaust pipe diameter: 70 mm
- Active exhaust valve for optimized sound and performance
- Exhaust backpressure: 0.25 bar at full load
Note: The active exhaust valve enhances both performance and acoustic characteristics.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- N74B60
- Displacement
- 6.0 liters
- Configuration
- V12
- Aspiration
- Twin-turbocharged
- Fuel Type
- Premium unleaded (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2009-2015
Performance Specifications
- Power Output
- 544 hp @ 5250 rpm
- Torque
- 553 lb-ft @ 1500-5000 rpm
- Compression Ratio
- 10.5:1
- Redline
- 7000 rpm
- Top Speed
- 155 mph (electronically limited)
- Acceleration 0 To 60
- 4.5 seconds
Engine Dimensions
- Bore
- 89.0 mm
- Stroke
- 80.0 mm
- Cylinder Spacing
- 91.0 mm
- Engine Length
- 750 mm
- Engine Width
- 850 mm
- Engine Height
- 720 mm
- Weight
- 265 kg
Fuel System
- injection Type
- Direct fuel injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13537585279
- Fuel Pump Part Number
- 16146757263
- Fuel Filter Part Number
- 13327798022
Turbocharger Specifications
- Turbo Type
- Twin-scroll turbochargers
- Boost Pressure
- 1.2 bar
- Turbo Part Number
- 11657833789
- Wastegate Actuator Part Number
- 11657833790
- intercooler Type
- Air-to-air
Lubrication System
- Oil Capacity
- 9.5 liters
- Oil Type
- BMW Longlife-01 5W-30
- Oil Filter Part Number
- 11427566309
- Oil Pump Type
- Gear-type
- Oil Pressure
- 3.5-4.5 bar at 2000 rpm
Cooling System
- Coolant Capacity
- 12.5 liters
- Coolant Type
- BMW Antifreeze/Coolant
- Thermostat Opening Temperature
- 97°C
- Water Pump Part Number
- 11517586925
- Radiator Part Number
- 17117586924
Ignition System
- Spark Plug Type
- BMW NGK SILZKBR8D8S
- Spark Plug Gap
- 0.8 mm
- Ignition Coil Part Number
- 12137585279
- Ignition Timing
- 10° BTDC at idle
Emissions System
- Emission Standard
- EU5 / ULEV II
- Catalytic Converter Part Number
- 18307586923
- Oxygen Sensor Part Number
- 11787586922
- EGR System
- Not applicable (direct injection)
Maintenance Specifications
- Spark Plug Replacement interval
- 60,000 miles
- Oil Change interval
- 10,000 miles or 12 months
- Air Filter Replacement interval
- 30,000 miles
- Fuel Filter Replacement interval
- 60,000 miles
- Coolant Replacement interval
- 4 years or 60,000 miles
Diagnostic Specifications
- OBDII Port Location
- Under dashboard, driver's side
- Diagnostic Trouble Codes
-
- P0171
- P0300
- P0420
- Scan Tool Compatibility
- BMW ISTA/D, INPA
- Common Faults
-
- Turbocharger wastegate failure
- High-pressure fuel pump failure
- Ignition coil failure
Service Information Service
Detailed service requirements and schedules for the 6.0L N74B60 engine
- Engine oil and filter change
- Inspect brake system
- Check coolant level and condition
Use only BMW-approved fluids and parts
- Replace air filter
- Inspect spark plugs
- Check turbocharger system
Inspect for boost leaks and wastegate operation
- Replace spark plugs
- Replace fuel filter
- Inspect cooling system hoses
Perform compression test if misfires are detected
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 6.0L V12 engine in the 2009-2015 BMW 760i?
What is the horsepower and torque output of the 6.0L V12 engine in the 2009-2015 BMW 760i?
The 6.0L V12 engine (N74B60) in the 2009-2015 BMW 760i produces 544 horsepower at 5,250 rpm and 553 lb-ft of torque between 1,500 and 5,000 rpm. This engine features twin-turbocharging and direct fuel injection for optimal performance.
Q2 What type of fuel system does the 6.0L V12 engine use?
What type of fuel system does the 6.0L V12 engine use?
The 6.0L V12 engine utilizes a high-precision direct fuel injection system (HPI) with piezo injectors. This system ensures precise fuel delivery, improving combustion efficiency and reducing emissions.
Q3 What is the recommended oil type and capacity for the 6.0L V12 engine?
What is the recommended oil type and capacity for the 6.0L V12 engine?
BMW recommends using SAE 5W-30 or 5W-40 synthetic oil that meets BMW Longlife-01 or Longlife-04 specifications. The oil capacity is approximately 9.5 liters (10 quarts), including the oil filter.
Q4 How often should the spark plugs be replaced on the 6.0L V12 engine?
How often should the spark plugs be replaced on the 6.0L V12 engine?
BMW recommends replacing the spark plugs every 60,000 miles or 96,000 kilometers. The engine uses 12 iridium-tipped spark plugs, which are critical for maintaining optimal combustion and performance.
Q5 What is the compression ratio of the 6.0L V12 engine?
What is the compression ratio of the 6.0L V12 engine?
The 6.0L V12 engine has a compression ratio of 10.0:1. This ratio is optimized for the twin-turbocharging system, balancing performance and fuel efficiency.
Q6 What is the recommended coolant type for the 6.0L V12 engine?
What is the recommended coolant type for the 6.0L V12 engine?
BMW recommends using a 50/50 mixture of BMW-approved antifreeze and distilled water. The coolant capacity is approximately 15 liters (16 quarts), including the reservoir.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW N74 Engine Technical Manual
Coming SoonOfficial technical documentation for the N74B60 engine, including detailed specifications, maintenance procedures, and troubleshooting guides.
BMW 760i Service Schedule
Coming SoonComprehensive service schedule for the 2009-2015 BMW 760i, including recommended intervals for oil changes, spark plug replacement, and other critical maintenance tasks.
BMW Genuine Parts Catalog
Coming SoonOfficial catalog of genuine BMW parts for the 6.0L V12 engine, ensuring compatibility and optimal performance.
BMW Turbocharger Maintenance Guide
Coming SoonDetailed guide on maintaining and inspecting the twin-turbochargers in the N74B60 engine, including common issues and solutions.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.