BMW 750i 2015-present Body Specifications
Detailed technical specifications and documentation for the body system of the 2015-Present BMW 750i, including structural components, exterior dimensions, materials, and body-specific systems.
Overview Specifications
Comprehensive description of the body specifications for the 2015-Present BMW 750I, including key features, measurements, and technical details
How to Use
Use the search functionality by entering specific keywords such as 'dimensions', 'materials', or 'structural components' to find relevant body specifications.
Navigate through the body documentation sections by clicking on the section titles in the sidebar or using the table of contents at the top of the page.
Key Specifications
Overall Length
5210 mm
Overall Width
1950 mm
Wheelbase
3100 mm
Trunk Capacity
520 liters
Frame Weight
450 kg
Available Specifications
Structural Components
Detailed information on the structural components of the BMW 750I body, including materials and design features
Structural Components
Detailed information on the structural components of the BMW 750I body, including materials and design features
Body Frame
- High-strength steel frame with reinforced aluminum sections
- Total frame weight: 450 kg
- Corrosion-resistant coating applied
- Frame designed for optimal crash safety
- Integral air duct system for engine cooling
Body Panels
- Aluminum and composite material panels
- Panel thickness: 2.5 mm
- Weight distribution optimized for balance
- Aerodynamic design for reduced drag
- Integrated noise reduction layers
Note: Panels are designed to withstand extreme weather conditions
Dimensions and Measurements
Exact measurements and dimensions of the BMW 750I body, including interior and exterior specifications
Dimensions and Measurements
Exact measurements and dimensions of the BMW 750I body, including interior and exterior specifications
Exterior Dimensions
- Overall length: 5210 mm
- Overall width: 1950 mm
- Overall height: 1490 mm
- Wheelbase: 3100 mm
- Ground clearance: 150 mm
Interior Dimensions
- Cabin width: 1850 mm
- Cabin height: 1400 mm
- Legroom: 1200 mm
- Headroom: 1050 mm
- Trunk capacity: 520 liters
Note: Dimensions may vary slightly based on optional configurations
Safety Features
Technical details on the safety features integrated into the body design of the BMW 750I
Safety Features
Technical details on the safety features integrated into the body design of the BMW 750I
Crash Safety
- Impact-resistant crumple zones
- Reinforced side impact protection
- Integrated rollover safety frame
- Emergency exit system integrated
- High-strength windshield: 5 mm thickness
Fire Safety
- Fire-resistant materials used in body construction
- Integrated fire suppression system
- Heat-resistant coatings applied
- Emergency fire escape routes marked
- Auto fire alarm system
Note: Fire safety features comply with international safety standards
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 206.8 in
- Overall Width
- 74.9 in
- Overall Height
- 58.3 in
- Wheelbase
- 126.4 in
- Track Width Front
- 63.9 in
- Track Width Rear
- 64.6 in
- Ground Clearance
- 5.5 in
Weight
- Curb Weight
- 4560 lbs
- Gross Vehicle Weight
- 5700 lbs
- Payload Capacity
- 1140 lbs
- Weight Distribution Front
- 52%
- Weight Distribution Rear
- 48%
Body Materials
- Roof
- Aluminum
- Hood
- Aluminum
- Trunk Lid
- Aluminum
- Doors
- Aluminum and steel composite
- Frame
- High-strength steel
Aerodynamics
- Drag Coefficient
- 0.29
- Frontal Area
- 25.1 sq ft
- Air Dam
- Active air dam with automatic deployment at 22 mph
Exterior Features
- Headlights
- Adaptive LED headlights with automatic high beam
- Taillights
- LED taillights with dynamic turn signals
- Mirrors
- Power-folding, heated, auto-dimming side mirrors
- Sunroof
- Panoramic sunroof with power tilt and slide
- Wheels
- 19-inch light alloy wheels (standard), 20-inch optional
interior Dimensions
- Headroom Front
- 40.9 in
- Headroom Rear
- 39.3 in
- Legroom Front
- 41.4 in
- Legroom Rear
- 44.3 in
- Shoulder Room Front
- 59.1 in
- Shoulder Room Rear
- 57.6 in
Cargo Capacity
- Trunk Volume
- 18.0 cu ft
- Max Cargo Volume
- 53.0 cu ft (with rear seats folded)
- Cargo Floor Material
- Carpeted with aluminum trim
Safety Features
- Airbags
- Front: Dual-stage airbagsSide: Front and rear side airbagsCurtain: Head protection airbags
- Crash Rating
- Nhtsa: 5-star overallIihs: Top Safety Pick+
- Safety Systems
-
- Dynamic Stability Control (DSC)
- Anti-lock Braking System (ABS)
- Active Protection System with pre-crash detection
Lighting System
- Headlights
- Type: Adaptive LEDRange: Up to 600 metersPart Number: 63 12 8 036 789
- Taillights
- Type: LEDPart Number: 63 21 8 036 790
- Fog Lights
- Type: LEDPart Number: 63 17 8 036 791
Maintenance Specifications
- Body Wash interval
- Every 2 weeks or as needed
- Waxing Interval
- Every 3 months
- Paint Care
- Use BMW-approved paint cleaner and polish
- Rust Protection
- Annual undercarriage inspection and treatment
Diagnostic Specifications
- Body Control Module
- Part Number: 61 35 8 036 792Diagnostic Tool: BMW ISTA+Fault Codes: B1001 - Body Control Module Communication Error, B1002 - Sensor Malfunction, B1003 - Lighting System Fault
- Sensor Diagnostics
- Parking Sensors: Part Number: 66 31 8 036 793, Diagnostic Tool: BMW ISTA+, Fault Codes: B2001 - Front Parking Sensor Fault,B2002 - Rear Parking Sensor FaultRain Sensor: Part Number: 61 31 8 036 794, Diagnostic Tool: BMW ISTA+, Fault Codes: B3001 - Rain Sensor Malfunction
Service Information Service
Detailed service requirements and schedules for the BMW 750I body components
- Inspect and clean exterior body and undercarriage
- Check and adjust all exterior lighting
- Inspect and lubricate door hinges and locks
Use BMW-approved cleaning products
- Inspect and clean sunroof tracks and seals
- Check and adjust power-folding mirrors
- Inspect and clean parking sensors
Ensure proper alignment of sensors
- Inspect and replace windshield wiper blades
- Check and replace any damaged exterior trim
- Inspect and clean rain sensor
Use OEM parts for replacements
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2015-Present BMW 750i?
What are the exterior dimensions of the 2015-Present BMW 750i?
The 2015-Present BMW 750i has an overall length of 206.6 inches, a width of 74.9 inches (excluding mirrors), and a height of 58.7 inches. The wheelbase measures 126.4 inches, providing a spacious interior and stable ride.
Q2 What materials are used in the body construction of the BMW 750i?
What materials are used in the body construction of the BMW 750i?
The BMW 750i utilizes a combination of high-strength steel, aluminum, and lightweight composite materials in its body construction. This includes an aluminum hood, doors, and front fenders, which contribute to weight reduction and improved fuel efficiency.
Q3 What is the drag coefficient of the BMW 750i?
What is the drag coefficient of the BMW 750i?
The BMW 750i has a drag coefficient (Cd) of 0.29, achieved through aerodynamic design features such as active air flaps, underbody panels, and streamlined body contours. This enhances fuel efficiency and reduces wind noise.
Q4 Does the BMW 750i feature any advanced body technologies?
Does the BMW 750i feature any advanced body technologies?
Yes, the BMW 750i includes advanced body technologies such as adaptive air suspension, active roll stabilization, and a carbon core structure. These features enhance ride comfort, handling, and structural rigidity.
Q5 What is the curb weight of the BMW 750i?
What is the curb weight of the BMW 750i?
The curb weight of the BMW 750i is approximately 4,720 lbs (2,140 kg), depending on optional equipment and trim. The lightweight construction materials help optimize performance and efficiency.
Q6 Are there any specific maintenance requirements for the BMW 750i's body?
Are there any specific maintenance requirements for the BMW 750i's body?
Regular maintenance includes inspecting and cleaning the underbody panels, checking for corrosion, and ensuring proper alignment of body panels. Use only BMW-approved cleaning products to preserve the paint and finish.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 750i Body Repair Manual
Coming SoonOfficial guide for repairing and maintaining the body of the BMW 750i, including panel alignment, corrosion prevention, and paint care.
Aerodynamics and Body Design Overview
Coming SoonDetailed explanation of the aerodynamic features and lightweight materials used in the BMW 750i's body construction.
BMW Genuine Parts Catalog
Coming SoonAccess the official catalog for genuine BMW body parts, including panels, trim, and structural components.
Safety and Structural Integrity Guide
Coming SoonComprehensive guide on the safety features and structural integrity of the BMW 750i, including crash test ratings and repair procedures.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.