BMW 740i 2016-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2016-Present BMW 740i. Includes performance data, system overviews, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2016-Present BMW 740i, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or the sidebar menu. Each section is labeled for easy access to specific engine details.
Key Specifications
Engine Type
Inline 6-cylinder
Displacement
2998 cc
Power Output
335 hp (250 kW)
Torque
332 lb-ft (450 Nm)
Fuel Efficiency
22 mpg city / 30 mpg highway
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and acceleration.
Power and Torque
- Maximum power output: 335 hp (250 kW) at 5500-6500 rpm
- Peak torque: 332 lb-ft (450 Nm) at 1380-5000 rpm
- Compression ratio: 11.0:1
- Direct injection system: High Precision Injection
- Turbocharger: TwinPower Turbo technology
Acceleration and Top Speed
- 0-60 mph acceleration: 5.2 seconds
- Top speed: Electronically limited to 155 mph (250 km/h)
- Fuel efficiency: 22 mpg city / 30 mpg highway
- CO2 emissions: 189 g/km
- Transmission: 8-speed Steptronic automatic
Note: Performance figures may vary slightly depending on driving conditions and vehicle configuration.
Engine Design and Construction
Technical details about the design, materials, and construction of the 3.0l-engine.
Engine Design and Construction
Technical details about the design, materials, and construction of the 3.0l-engine.
Engine Block and Components
- Engine type: Inline 6-cylinder
- Displacement: 2998 cc
- Cylinder bore: 82 mm
- Piston stroke: 94.6 mm
- Cylinder head material: Aluminum
Cooling and Lubrication
- Cooling system: Liquid-cooled with electric water pump
- Oil capacity: 6.5 liters (with filter)
- Oil type: BMW TwinPower Turbo LL-01 approved
- Oil change interval: 10,000 miles or 12 months
- Thermostat: Electronically controlled
Note: Always use BMW-approved fluids to ensure optimal engine performance and longevity.
Fuel System and Emissions
Details about the fuel delivery system, emissions control, and compliance standards.
Fuel System and Emissions
Details about the fuel delivery system, emissions control, and compliance standards.
Fuel Delivery
- Fuel type: Premium unleaded (91 octane or higher)
- Fuel tank capacity: 20.6 gallons (78 liters)
- Fuel injection: Direct injection with multi-hole injectors
- Fuel pressure: 200 bar (2900 psi)
- Fuel pump: Electric, in-tank
Emissions Control
- Catalytic converter: Close-coupled with secondary converter
- Exhaust system: Stainless steel with dual tailpipes
- Emissions standard: Euro 6 and ULEV 50 compliant
- EGR system: Integrated with turbocharger
- Particulate filter: Optional Diesel Particulate Filter (DPF)
Note: Emissions systems are designed to meet stringent global standards while maintaining engine efficiency.
Electrical and Ignition System
Technical specifications for the electrical and ignition systems of the 3.0l-engine.
Electrical and Ignition System
Technical specifications for the electrical and ignition systems of the 3.0l-engine.
Ignition System
- Ignition type: Coil-on-plug with individual coils
- Spark plug gap: 0.8 mm
- Spark plug type: Iridium-tipped
- Ignition timing: Fully electronic with variable timing
- Battery: 12V AGM, 90 Ah
Electrical System
- Alternator output: 180 A
- Starter motor: High-torque, brushless design
- Wiring harness: Heat-resistant, shielded
- ECU: Bosch MEVD17.2 with integrated diagnostics
- Sensors: Knock, oxygen, temperature, and pressure sensors
Note: The electrical system is designed for reliability and compatibility with advanced driver-assistance systems.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- B58B30M0
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2016-Present
Performance Specifications
- Max Power
- 335 hp @ 5500-6500 rpm
- Max Torque
- 332 lb-ft @ 1380-5000 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph
- 5.2 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13538616079
- Fuel Pump Part Number
- 16148659879
- Fuel Filter Part Number
- 13327707222
Cooling System
- Coolant Capacity
- 10.6 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586961
- Water Pump Part Number
- 11518638101
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20 or 0W-30
- Oil Filter Part Number
- 11427837969
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Part Number
- 12120039664
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12137585491
- Ignition Timing
- Fully electronic, variable
Emissions System
- Emissions Standard
- EU6 / LEV3
- Catalytic Converter Part Number
- 18307585263
- Oxygen Sensor Part Number
- 11787558025
- EGR System
- Integrated with turbocharger
- Particulate Filter
- Optional
Turbocharger System
- Turbo Type
- Twin-scroll single turbo
- Boost Pressure
- 1.2 bar
- Wastegate Control
- Electronic
- intercooler Type
- Air-to-air
- Turbocharger Part Number
- 11657848977
Engine Management
- ECU Part Number
- 0261200911
- Software Version
- I-Level S15A-20-03-540
- Diagnostic interface
- OBD-II
- Sensor References
- Crankshaft Position Sensor: 12147848977Camshaft Position Sensor: 12147585491Knock Sensor: 12147585492
Maintenance Specifications
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Lifetime lubrication, no adjustment required
- Belt Drive
- Serpentine Belt Part Number: 11287628621Tensioner Part Number: 11287628622Replacement interval: 60000 miles
- Spark Plug Replacement
- 60000 miles
- Air Filter Replacement
- 30000 miles
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Engine oil and filter change
- Inspect cooling system for leaks
- Check all fluid levels
- Inspect drive belts
Use only BMW-approved fluids and parts
- Replace engine air filter
- Inspect fuel system components
- Check ignition system
- Inspect exhaust system
Perform visual inspection of all engine components
- Replace spark plugs
- Replace serpentine belt
- Inspect timing chain
- Check turbocharger system
Consider replacing coolant if not done previously
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2016-Present BMW 740i?
What is the horsepower and torque output of the 3.0L engine in the 2016-Present BMW 740i?
The 3.0L turbocharged inline-6 engine in the BMW 740i produces 320 horsepower at 5,500-6,500 rpm and 330 lb-ft of torque at 1,380-5,000 rpm.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The recommended oil type is BMW Longlife-01 FE 0W-20 or 0W-30. The oil capacity is approximately 6.5 liters (6.9 quarts).
Q4 What is the engine displacement of the 3.0L engine?
What is the engine displacement of the 3.0L engine?
The engine displacement is 2,998 cc (3.0 liters), achieved with a bore of 82.0 mm and a stroke of 94.6 mm.
Q5 Does the 3.0L engine feature Valvetronic technology?
Does the 3.0L engine feature Valvetronic technology?
Yes, the 3.0L engine is equipped with BMW's Valvetronic system, which continuously adjusts valve lift for improved throttle response and fuel efficiency.
Q6 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio is 11.0:1, which contributes to the engine's balance of power and efficiency.
Q7 What is the recommended service interval for the 3.0L engine?
What is the recommended service interval for the 3.0L engine?
BMW recommends servicing the engine every 10,000 miles or 12 months, whichever comes first, under normal driving conditions. Severe driving conditions may require more frequent service.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 740i Owner's Manual
Coming SoonOfficial owner's manual for the 2016-Present BMW 740i, including detailed engine specifications and maintenance guidelines.
BMW Technical Service Bulletins
Coming SoonAccess the latest technical service bulletins (TSBs) for the 3.0L engine, including updates and repair procedures.
BMW Genuine Parts Catalog
Coming SoonExplore the official catalog for genuine BMW parts and accessories compatible with the 3.0L engine.
BMW Service and Maintenance Guide
Coming SoonComprehensive guide to scheduled maintenance and service procedures for the 3.0L engine.
BMW Warranty Information
Coming SoonDetailed information on BMW's warranty coverage, including terms and conditions specific to the 3.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.