BMW 650i 2012-2017

BMW 650i 2012-2017 Fuel System Specifications

Detailed technical specifications and documentation for the fuel system of the 2012-2017 BMW 650I, including fuel type, pressure, injector specs, and pump performance. Ideal for technicians and enthusiasts.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the fuel specifications for the 2012-2017 BMW 650I, including key features, measurements, and technical details

How to Use

Use the search function to locate specific fuel specifications by entering keywords such as 'octane rating', 'fuel capacity', or 'emission standards'.

Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each major section is labeled for easy reference.

Key Specifications

Fuel Type

Premium unleaded (91 AKI or higher)

Fuel Tank Capacity

18.5 gallons (70 liters)

Fuel Pump Pressure

5.8 bar (84 psi)

CO2 Emissions

199 g/km

Fuel Consumption

8.5 L/100 km

Available Specifications

Fuel Requirements

Detailed information on the type of fuel required for optimal performance and compliance with emission standards.

Recommended Fuel Type

Premium unleaded gasoline with an octane rating of 91 AKI (Anti-Knock Index) or higher
Minimum octane rating of 89 AKI is acceptable but may reduce performance
Use of lower octane fuel may cause engine knocking and damage
Fuel must meet EN 228 or ASTM D4814 standards

Fuel Additives

Avoid using fuel additives unless approved by BMW
Additives may affect emission control systems
BMW-approved additives can be used for cleaning the fuel system
Follow manufacturer guidelines for additive usage

Note: Using unapproved additives may void the vehicle warranty.

Fuel System Specifications

Technical details about the fuel system, including capacity, pressure, and component specifications.

Fuel Tank Capacity

Total fuel tank capacity: 18.5 gallons (70 liters)
Reserve fuel capacity: 2.5 gallons (9.5 liters)
Fuel tank material: High-density polyethylene (HDPE)
Fuel tank design: Dual-chamber for improved safety and efficiency

Fuel Pump Specifications

Electric fuel pump with a flow rate of 120 liters per hour
Operating pressure: 5.8 bar (84 psi)
Fuel pump relay: Integrated into the vehicle's electronic control unit (ECU)
Fuel filter integrated into the pump assembly

Emission Standards

Information on the vehicle's compliance with emission regulations and technical specifications.

Emission Control System

Complies with Euro 5 and ULEV II emission standards
Equipped with a three-way catalytic converter
Oxygen sensors (lambda sensors) monitor exhaust gases
Exhaust gas recirculation (EGR) system reduces NOx emissions

CO2 Emissions

CO2 emissions: 199 g/km (combined cycle)
Fuel consumption: 8.5 L/100 km (combined cycle)
AdBlue system not required for this model
Particulate filter not included in this configuration

Note: Emission values may vary based on driving conditions and fuel quality.

Search Specifications

Search by specification name, value, or description

Component Specifications

Fuel Type

Recommended Fuel: Premium unleaded gasoline (91 AKI or 95 RON)

Minimum Octane Rating: 89 AKI (87 RON)

Ethanol Content: Up to 10% ethanol (E10)

Notes: Using fuel with lower octane may reduce performance and fuel efficiency

Fuel Tank

Capacity: 18.5 gallons (70 liters)

Material: High-density polyethylene (HDPE)

Part Number: 16117307994

Pressure Rating: 3.0 bar (43.5 psi)

Notes: Includes integrated fuel pump and level sensor

Fuel Pump

Type: Electric in-tank fuel pump

Flow Rate: 120 liters per hour (31.7 gallons per hour)

Operating Pressure: 5.0 bar (72.5 psi)

Part Number: 16147183703

Voltage: 12V DC

Notes: Includes fuel filter and pressure regulator

Fuel injectors

Type: Direct injection (DI)

Flow Rate: 200 cc/min at 3.0 bar

Part Number: 13537585291

Spray Pattern: Multi-hole

Operating Pressure: 200 bar (2900 psi)

Notes: High-pressure injectors for precise fuel delivery

Fuel Filter

Type: In-line fuel filter

Part Number: 13327703054

Filtration Rating: 10 microns

Replacement interval: Every 30,000 miles (48,000 km)

Notes: Integrated with fuel pump module

Fuel Pressure Sensor

Type: High-pressure sensor

Part Number: 13627837922

Operating Range: 0-250 bar (0-3625 psi)

Output Signal: 0.5-4.5V

Notes: Monitors fuel rail pressure for optimal engine performance

Fuel Rail

Material: Stainless steel

Part Number: 13537585290

Pressure Rating: 250 bar (3625 psi)

Notes: Distributes fuel to injectors at high pressure

Fuel System Maintenance

injector Cleaning Interval: Every 60,000 miles (96,000 km)

Fuel Tank Cleaning Interval: Every 100,000 miles (160,000 km)

Notes: Use BMW-approved fuel system cleaners for maintenance

Fuel System Diagnostics

Diagnostic Tool: BMW ISTA/D or compatible OBD-II scanner

Common Codes

P0171
P0172
P0087
P0088

Notes: Check fuel pressure, injector performance, and sensor readings

Fuel System Safety

Fire Hazard Warning: Avoid open flames or sparks near fuel system components

Pressure Release Procedure: Depressurize fuel system before servicing

Notes: Follow BMW service manual safety guidelines

Service Information Service

Detailed service requirements and schedules for the fuel system

30,000 miles

24 months

Inspect fuel lines and connections
Check fuel filter condition
Test fuel pressure

Replace fuel filter if necessary

60,000 miles

48 months

Clean fuel injectors
Inspect fuel pump performance
Check fuel pressure sensor readings

Use BMW-approved cleaning solutions

100,000 miles

84 months

Inspect fuel tank for leaks or damage
Replace fuel pump if necessary
Check fuel rail pressure

Perform full fuel system diagnostic

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of fuel is recommended for the 2012-2017 BMW 650i?

The 2012-2017 BMW 650i requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower-octane fuel may result in reduced performance and engine knocking.

What is the fuel tank capacity of the 2012-2017 BMW 650i?

The fuel tank capacity of the 2012-2017 BMW 650i is 18.5 gallons (70 liters). This allows for a driving range of approximately 400-500 miles depending on driving conditions and fuel efficiency.

Can I use ethanol-blended fuel in the 2012-2017 BMW 650i?

Yes, the 2012-2017 BMW 650i can use ethanol-blended fuels containing up to 10% ethanol (E10). However, fuels with higher ethanol content (e.g., E15 or E85) are not recommended as they may cause damage to the fuel system and engine components.

What is the fuel economy of the 2012-2017 BMW 650i?

The 2012-2017 BMW 650i has an EPA-estimated fuel economy of 17 mpg in the city and 25 mpg on the highway. Actual fuel economy may vary based on driving habits, road conditions, and vehicle maintenance.

How often should I replace the fuel filter in the 2012-2017 BMW 650i?

The fuel filter in the 2012-2017 BMW 650i is designed to last the lifetime of the vehicle under normal driving conditions. However, if you experience reduced performance or fuel delivery issues, it may need to be inspected and replaced by a certified BMW technician.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW Fuel System Maintenance Guide

Coming Soon

A detailed guide on maintaining the fuel system, including fuel injectors, fuel pump, and fuel filter, to ensure optimal performance and longevity.

Understanding Octane Ratings and Fuel Types

Coming Soon

An educational resource explaining octane ratings, fuel types, and their impact on engine performance and efficiency.

BMW Genuine Parts Catalog

Coming Soon

Access the official BMW parts catalog to find genuine fuel system components and ensure compatibility with your 2012-2017 BMW 650i.

Fuel Efficiency Tips for BMW Vehicles

Coming Soon

Learn practical tips to improve fuel efficiency and reduce fuel consumption in your 2012-2017 BMW 650i.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.