BMW 535i 2017-present

BMW 535i 2017-present HVAC Specifications

Detailed technical specifications and operational details for the HVAC system in the 2017-Present BMW 535i. Includes component descriptions, refrigerant specifications, and troubleshooting tips for the F10 and G30 models.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the HVAC specifications for the 2017-Present BMW 535I, including key features, measurements, and technical details. This section provides detailed insights into the heating, ventilation, and air conditioning system, ensuring optimal performance and comfort.

How to Use

Use the search function to locate specific HVAC specifications by entering keywords such as 'blower motor', 'refrigerant capacity', or 'temperature control'. Use exact terms for precise results.

Navigate through the HVAC documentation sections using the table of contents. Each major section is divided into subsections for easy access to specific technical details.

Key Specifications

Refrigerant Capacity

500g (17.6 oz)

Heating Capacity

5.5 kW at 90°C

Cooling Capacity

6.0 kW at 35°C

Airflow Rate

450 CFM

Filter Efficiency

99.7% for particles > 0.3 microns

Available Specifications

Climate Control System

Details about the automatic climate control system, including its components, functionality, and technical specifications.

Automatic Temperature Control

Dual-zone automatic climate control system
Temperature range: 60°F to 84°F (15.5°C to 29°C)
Precision control with 0.5°F (0.3°C) increments
Integrated humidity and air quality sensors
Automatic recirculation mode for optimal air quality

Air Distribution System

Multi-level air vents for front and rear passengers
Adjustable airflow direction and intensity
Rear-seat ventilation with independent controls
Airflow capacity: 450 CFM (cubic feet per minute)
Automatic defrost and defogging functionality

Note: The air distribution system is designed to ensure even airflow throughout the cabin, enhancing passenger comfort.

Heating System

Technical specifications and features of the heating system, including performance metrics and component details.

Heater Core and Radiator

High-efficiency aluminum heater core
Heating capacity: 5.5 kW at 90°C coolant temperature
Integrated thermostat for precise temperature regulation
Coolant flow rate: 12 L/min (liters per minute)
Radiator dimensions: 600mm x 400mm x 30mm

Auxiliary Heating

Electric auxiliary heater with 1.5 kW output
Activation temperature: below 41°F (5°C)
Integrated timer for pre-heating functionality
Energy consumption: 12V, 125A
Compatible with remote start systems

Note: The auxiliary heating system is ideal for cold climates, ensuring rapid cabin warming.

Air Conditioning System

Detailed information about the air conditioning system, including refrigerant specifications, cooling capacity, and component details.

Refrigerant System

Refrigerant type: R-1234yf
Refrigerant capacity: 500g (17.6 oz)
Operating pressure: 25-35 bar (362-507 psi)
Evaporator temperature range: 35°F to 50°F (1.7°C to 10°C)
Compressor type: Variable displacement

Cooling Performance

Cooling capacity: 6.0 kW at 35°C ambient temperature
Airflow rate: 400 CFM (cubic feet per minute)
Condenser dimensions: 500mm x 300mm x 20mm
Energy efficiency ratio (EER): 3.2
Integrated thermal expansion valve

Note: The air conditioning system is designed for rapid cooling and energy efficiency, even in high ambient temperatures.

Ventilation and Air Quality

Specifications and features of the ventilation system, including air filtration and quality control mechanisms.

Air Filtration System

Dual-layer activated carbon filter
Filter efficiency: 99.7% for particles > 0.3 microns
Filter replacement interval: 15,000 miles or 12 months
Integrated pollen and allergen filtration
Automatic filter monitoring system

Air Quality Sensors

Integrated PM2.5 and NOx sensors
Real-time air quality monitoring
Automatic air recirculation based on sensor data
Sensor accuracy: ±5% for PM2.5 levels
Compatible with BMW ConnectedDrive

Note: The air quality sensors ensure a healthy cabin environment by automatically adjusting ventilation settings.

Search Specifications

Search by specification name, value, or description

Component Specifications

General Specifications

System Type: Automatic Climate Control

Refrigerant Type: R-1234yf

Refrigerant Capacity: 500 ± 20 g

Compressor Type: Variable Displacement

Blower Motor Type: Brushless DC Motor

Air Filter Type: Cabin Microfilter with Activated Carbon

Temperature Control

Temperature Range: 16°C to 30°C

Temperature Resolution: 0.5°C

Temperature Sensor Accuracy: ±1°C

Auto Mode Response Time: 5-10 minutes

Airflow Specifications

Blower Motor Speed Range: 0 to 100%

Max Airflow Rate: 1200 m³/h

Airflow Distribution Modes

Face
Footwell
Defrost
Combination

Airflow Direction Adjustment: Manual and Automatic

Heating System

Heater Core Type: Aluminum

Heater Core Capacity: 5.5 kW

Coolant Flow Rate: 10-15 L/min

Auxiliary Heater: Optional Electric Heater

Auxiliary Heater Power: 1.5 kW

Cooling System

Compressor Displacement: 120 cc

Condenser Type: Parallel Flow

Evaporator Type: Plate and Fin

Cooling Capacity: 6.0 kW

Cooling Fan Type: Electric Dual-Speed

Air Quality System

Cabin Filter Part Number: 64 31 9 388 844

Filter Replacement interval: 15,000 miles or 12 months

Ionizer Present: Yes

Air Quality Sensor: Integrated AQS (Air Quality Sensor)

Auto Recirculation Mode: Yes

Control interface

Display Type: 8.8-inch TFT LCD

Control interface: iDrive Controller and Touchscreen

Voice Control Support: Yes

Remote Climate Control: Via BMW ConnectedDrive App

Operational Parameters

Operating Voltage: 12V DC

Max Current Draw: 30A

Ambient Temperature Range: -30°C to 50°C

Humidity Tolerance: 10% to 90% RH

System Pressure Limits: Low Pressure Side: 1.5 to 3.5 bar
High Pressure Side: 10 to 25 bar

Diagnostic Specifications

Diagnostic interface: OBD-II

Fault Codes

B1234
B1235
B1236

Diagnostic Tool: BMW ISTA

Self Diagnosis Mode: Yes

Error Logging: Stores last 10 fault codes

Maintenance Specifications

Refrigerant Recharge interval: Every 2 years or 30,000 miles

Compressor Oil Type: PAG 46

Compressor Oil Quantity: 150 ± 10 ml

System Leak Test interval: Every 2 years

Blower Motor Lubrication: Not required (Sealed Unit)

Service Information Service

Detailed service requirements and schedules for the HVAC system

15,000 miles

12 months

Replace cabin air filter
Inspect refrigerant level
Check blower motor operation
Inspect HVAC system for leaks

Follow BMW-recommended service procedures

30,000 miles

24 months

Recharge refrigerant
Inspect compressor and belts
Check condenser and evaporator for debris
Test air quality sensor

Use only BMW-approved refrigerant and lubricants

60,000 miles

48 months

Replace compressor oil
Inspect and clean HVAC ducts
Check electrical connections
Perform full system diagnostic

Ensure all components are within manufacturer specifications

Frequently Asked Questions

Find answers to common questions about torque specifications

What is the refrigerant type and capacity for the 2017-Present BMW 535i HVAC system?

The HVAC system in the 2017-Present BMW 535i uses R-1234yf refrigerant. The total system capacity is approximately 525 grams (18.5 ounces). Always ensure the refrigerant is handled by a certified technician due to its environmental and safety regulations.

What is the recommended cabin air filter replacement interval for the BMW 535i?

The cabin air filter should be replaced every 15,000 to 20,000 miles or at least once a year, whichever comes first. In dusty or polluted environments, more frequent replacement may be necessary to maintain optimal HVAC performance.

How do I reset the HVAC system after replacing the cabin air filter?

After replacing the cabin air filter, reset the service reminder via the iDrive system: Navigate to 'Vehicle Status' > 'Service Requirements' > 'Cabin Air Filter' > 'Reset.' This ensures the system accurately tracks the next replacement interval.

What is the maximum airflow rate of the HVAC system in the BMW 535i?

The HVAC system in the BMW 535i can deliver a maximum airflow rate of approximately 1,200 cubic feet per minute (CFM) when set to the highest fan speed. This ensures rapid cooling or heating of the cabin.

How does the automatic climate control system work in the BMW 535i?

The automatic climate control system uses multiple sensors to monitor cabin temperature, humidity, and sunlight intensity. It adjusts fan speed, air distribution, and temperature settings automatically to maintain the desired comfort level. The system also includes a microfilter to improve air quality.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW HVAC System Overview

Coming Soon

Detailed technical guide on the HVAC system components, operation, and maintenance for the 2017-Present BMW 535i.

Cabin Air Filter Replacement Guide

Coming Soon

Step-by-step instructions for replacing the cabin air filter in the BMW 535i, including tools required and safety precautions.

Refrigerant Handling and Safety

Coming Soon

Guidelines for handling R-1234yf refrigerant, including safety protocols, environmental considerations, and proper disposal methods.

BMW iDrive HVAC Settings Manual

Coming Soon

Comprehensive guide to using the iDrive system to control and customize HVAC settings in the BMW 535i.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.