BMW 535i 2017-present Brakes Specifications
Detailed technical specifications and maintenance guidelines for the 2017-Present BMW 535I brakes system, including front and rear brake components, performance metrics, and troubleshooting tips.
Overview Specifications
Comprehensive description of the brakes specifications for the 2017-Present BMW 535I, including key features, measurements, and technical details
How to Use
Use the search bar to find specific brakes specifications by entering keywords such as 'brake pad thickness', 'rotor diameter', or 'brake fluid type'.
Navigate through the brakes documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.
Key Specifications
Front Brake Rotor Diameter
348 mm
Rear Brake Rotor Diameter
345 mm
Brake Fluid Type
DOT 4 LV
Brake Pad Thickness (Front)
12 mm (new), 3 mm (min)
Brake Pad Thickness (Rear)
10 mm (new), 2 mm (min)
Available Specifications
Brake System Overview
Detailed description of the brake system components and their functions
Brake System Overview
Detailed description of the brake system components and their functions
Front Brake System
- Ventilated disc brakes with a diameter of 348 mm
- Single-piston floating calipers
- Brake pad thickness: 12 mm (new), 3 mm (minimum)
- Brake rotor thickness: 28 mm (new), 26 mm (minimum)
Rear Brake System
- Solid disc brakes with a diameter of 345 mm
- Single-piston floating calipers
- Brake pad thickness: 10 mm (new), 2 mm (minimum)
- Brake rotor thickness: 22 mm (new), 20 mm (minimum)
Note: Ensure proper alignment and torque specifications during installation to avoid uneven wear.
Brake Fluid Specifications
Information on the recommended brake fluid and maintenance intervals
Brake Fluid Specifications
Information on the recommended brake fluid and maintenance intervals
Brake Fluid Type
- DOT 4 LV brake fluid recommended
- Minimum boiling point: 230°C (dry), 155°C (wet)
- Fluid capacity: 1.0 liter (approximate)
Maintenance Intervals
- Replace brake fluid every 2 years or 30,000 miles
- Check fluid level monthly
- Inspect for leaks during routine maintenance
Brake Performance
Technical details on braking performance and safety features
Brake Performance
Technical details on braking performance and safety features
Stopping Distance
- 60-0 mph stopping distance: 110 feet (approximate)
- 100-0 km/h stopping distance: 35 meters (approximate)
- ABS (Anti-lock Braking System) standard
Brake Assist Features
- Dynamic Brake Control (DBC) included
- Brake Drying function for wet conditions
- Hill Start Assist for incline starts
Note: Regularly inspect brake assist systems to ensure optimal performance.
Brake Maintenance
Guidelines for maintaining and servicing the brake system
Brake Maintenance
Guidelines for maintaining and servicing the brake system
Brake Pad Replacement
- Replace pads when thickness reaches 3 mm (front) or 2 mm (rear)
- Use OEM or equivalent quality pads
- Torque caliper bolts to 25 Nm (front), 22 Nm (rear)
Brake Rotor Inspection
- Check for warping, scoring, or cracks
- Minimum thickness: 26 mm (front), 20 mm (rear)
- Replace rotors if below minimum thickness or damaged
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Brakes Specifications
Brake Type
- Front Brakes
- Ventilated disc
- Rear Brakes
- Solid disc
- Parking Brake
- Electromechanical
Brake Discs
- Front Disc Diameter
- 348 mm
- Front Disc Thickness
- 30 mm
- Rear Disc Diameter
- 345 mm
- Rear Disc Thickness
- 24 mm
- Material
- Cast iron with anti-corrosion coating
- Part Numbers
- Front Disc: 34116793871Rear Disc: 34216793872
Brake Pads
- Front Pad Thickness
- 14 mm
- Rear Pad Thickness
- 12 mm
- Material
- Low-metallic compound
- Part Numbers
- Front Pads: 34116861234Rear Pads: 34216861235
- Wear Limit
- 3 mm
Brake Calipers
- Front Caliper Type
- Fixed 4-piston
- Rear Caliper Type
- Floating single-piston
- Part Numbers
- Front Caliper: 34116793873Rear Caliper: 34216793874
Brake Fluid
- Type
- DOT 4
- Capacity
- 1.0 liter
- Boiling Point
- 230°C (dry)
- Replacement interval
- Every 2 years or 30,000 miles
Brake Hoses
- Material
- Reinforced rubber with steel braiding
- Length
- Front: 600 mmRear: 800 mm
- Part Numbers
- Front Hose: 34326793875Rear Hose: 34326793876
Parking Brake System
- Type
- Electromechanical
- Actuation
- Button on center console
- Cable Length
- 1200 mm
- Part Numbers
- Parking Brake Actuator: 34406793877Parking Brake Cable: 34416793878
Brake System Controls
- ABS
- Standard
- Dsc
- Dynamic Stability Control
- EBD
- Electronic Brakeforce Distribution
- Brake Assist
- Standard
Operational Parameters
- Maximum Brake Pressure
- 200 bar
- Brake Pedal Travel
- 50-70 mm
- Brake Pedal Force
- 30-50 N
- Stopping Distance
- 36 meters (100-0 km/h)
Diagnostic Specifications
- Fault Codes
-
- C101A - Brake Pressure Sensor Fault
- C101B - ABS Pump Motor Fault
- C101C - DSC Module Communication Error
- Diagnostic Tool
- BMW ISTA
- Diagnostic interval
- Every 12 months or 15,000 miles
Service Information Service
Detailed service requirements and schedules for the brake system
- Inspect brake pads and discs for wear
- Check brake fluid level and condition
- Inspect brake hoses for cracks or leaks
- Test parking brake functionality
Replace brake fluid every 2 years regardless of mileage
- Replace brake pads if worn below 3 mm
- Replace brake discs if below minimum thickness
- Inspect and lubricate brake caliper slides
- Check ABS and DSC system functionality
Perform a full brake system bleed if fluid is contaminated
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the recommended brake pad thickness for the 2017-Present BMW 535i?
What is the recommended brake pad thickness for the 2017-Present BMW 535i?
The recommended minimum brake pad thickness for the 2017-Present BMW 535i is 3mm. Pads should be replaced if they are worn below this threshold to ensure optimal braking performance and safety.
Q2 What type of brake fluid is required for the 2017-Present BMW 535i?
What type of brake fluid is required for the 2017-Present BMW 535i?
The 2017-Present BMW 535i requires DOT 4 LV (Low Viscosity) brake fluid. The recommended specification is BMW part number 81 22 2 372 990 or equivalent. Always ensure the fluid meets BMW's standards for proper performance.
Q3 How often should the brake rotors be inspected on a 2017-Present BMW 535i?
How often should the brake rotors be inspected on a 2017-Present BMW 535i?
Brake rotors should be inspected every 10,000 miles or during routine maintenance. The minimum allowable thickness for front rotors is 28.4mm, and for rear rotors, it is 18.4mm. Rotors should be replaced if they are worn below these specifications or show signs of warping or cracking.
Q4 What is the torque specification for the brake caliper bolts on the 2017-Present BMW 535i?
What is the torque specification for the brake caliper bolts on the 2017-Present BMW 535i?
The torque specification for the brake caliper bolts on the 2017-Present BMW 535i is 85 Nm (63 lb-ft) for the front calipers and 35 Nm (26 lb-ft) for the rear calipers. Always use a calibrated torque wrench to ensure proper tightening.
Q5 Can I use aftermarket brake pads on my 2017-Present BMW 535i?
Can I use aftermarket brake pads on my 2017-Present BMW 535i?
While aftermarket brake pads can be used, it is highly recommended to use genuine BMW brake pads or BMW-approved equivalents. Aftermarket pads may not meet the same performance, noise, and wear standards, potentially affecting braking efficiency and warranty coverage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW Brake System Overview
Coming SoonDetailed guide on the brake system components, maintenance schedules, and troubleshooting tips for the 2017-Present BMW 535i.
Brake Fluid Replacement Procedure
Coming SoonStep-by-step instructions for replacing brake fluid in the 2017-Present BMW 535i, including safety precautions and required tools.
Brake Pad and Rotor Replacement Guide
Coming SoonComprehensive guide for replacing brake pads and rotors on the 2017-Present BMW 535i, including torque specifications and inspection tips.
BMW Brake System Warning Indicators
Coming SoonExplanation of brake system warning lights and messages on the 2017-Present BMW 535i, including troubleshooting steps.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.