BMW 535i 2017-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L turbocharged inline-6 engine in the 2017-Present BMW 535I. Includes performance data, system overviews, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2017-Present BMW 535I, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
3.0 liters
Horsepower
335 hp @ 5500-6500 rpm
Torque
332 lb-ft @ 1380-5000 rpm
Compression Ratio
11.0:1
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and fuel efficiency.
Engine Performance
Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and fuel efficiency.
Power Output
- Maximum horsepower: 335 hp @ 5500-6500 rpm
- Peak torque: 332 lb-ft @ 1380-5000 rpm
- Compression ratio: 11.0:1
- Redline: 7000 rpm
Fuel Efficiency
- City fuel economy: 20 mpg
- Highway fuel economy: 30 mpg
- Combined fuel economy: 24 mpg
- Fuel type: Premium unleaded (91 octane or higher)
Note: Fuel efficiency may vary based on driving conditions and vehicle load.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Design
Technical details on the design and construction of the 3.0l-engine, including materials, layout, and key components.
Engine Layout
- Inline 6-cylinder configuration
- Turbocharged with TwinPower Turbo technology
- Direct fuel injection system
- Aluminum alloy block and cylinder head
Cooling System
- Liquid-cooled with electric water pump
- Radiator size: 600 mm x 400 mm
- Coolant capacity: 10.5 liters
- Thermostat opening temperature: 97°C
Note: Ensure coolant levels are checked regularly to prevent overheating.
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations.
Emissions and Compliance
Information on the engine's emissions standards and compliance with environmental regulations.
Emissions Standards
- Complies with Euro 6 and ULEV II standards
- CO2 emissions: 185 g/km
- NOx emissions: 0.02 g/km
- Equipped with dual catalytic converters
Exhaust System
- Dual exhaust with chrome tips
- Exhaust pipe diameter: 70 mm
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced emissions
Note: Regular maintenance of the exhaust system is required to ensure compliance with emissions standards.
Maintenance and Service
Guidelines and specifications for maintaining and servicing the 3.0l-engine to ensure optimal performance and longevity.
Maintenance and Service
Guidelines and specifications for maintaining and servicing the 3.0l-engine to ensure optimal performance and longevity.
Oil Specifications
- Recommended oil type: SAE 5W-30 synthetic
- Oil capacity: 6.5 liters
- Oil change interval: 10,000 miles or 12 months
- Oil filter part number: 11 42 7 566 327
Service Intervals
- Spark plug replacement: 60,000 miles
- Air filter replacement: 30,000 miles
- Timing chain inspection: 100,000 miles
- Coolant flush: 60,000 miles
Note: Adhere to the recommended service intervals to maintain engine performance and avoid costly repairs.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General
- Engine Code
- B58B30M0
- Displacement
- 3.0 liters
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Manufacturer
- BMW AG
- Production Years
- 2017-Present
Performance
- Horsepower
- 335 hp @ 5500-6500 rpm
- Torque
- 332 lb-ft @ 1380-5000 rpm
- Redline
- 7000 rpm
- Compression Ratio
- 11.0:1
- Maximum Boost Pressure
- 18.9 psi
Dimensions And Weight
- Engine Length
- 22.8 inches
- Engine Width
- 28.3 inches
- Engine Height
- 23.6 inches
- Dry Weight
- 357 lbs
- Oil Capacity
- 6.5 quarts
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 2900 psi
- injector Part Number
- 13538616079
- Fuel Filter Part Number
- 13327803638
- Fuel Pump Part Number
- 16147407961
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.028-0.032 inches
- Ignition Coil Part Number
- 12138657253
- Ignition Timing
- Fully electronic, variable
Cooling System
- Coolant Capacity
- 12.7 quarts
- Thermostat Opening Temperature
- 194°F
- Water Pump Part Number
- 11518638201
- Radiator Part Number
- 17117586932
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Type
- BMW TwinPower Turbo LL-01 5W-30 or equivalent
- Oil Filter Part Number
- 11427837969
- Oil Pressure
- 43.5-58 psi @ 2000 rpm
- Oil Change interval
- 10,000 miles or 12 months
Emissions
- Emission Standard
- Tier 3 / Euro 6
- Catalytic Converter Part Number
- 18307585203
- Oxygen Sensor Part Number
- 11787558025
- EGR System
- Not applicable (direct injection)
Maintenance
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Timing Chain
- Lifetime (no scheduled replacement)
- Belt Drive
- Serpentine belt, replace every 60,000 miles
- Spark Plug Replacement interval
- 60,000 miles
- Coolant Replacement interval
- 4 years or 50,000 miles
Diagnostics
- OBDII Port Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tool
- BMW ISTA+ or compatible OBDII scanner
- Sensor References
- Crankshaft Position Sensor Part Number: 12147596104Camshaft Position Sensor Part Number: 12147596103
Service Information Service
Detailed service requirements and schedules for the 3.0L B58 engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect tires and adjust pressure
Use only BMW-approved fluids and parts
- Replace air filter
- Inspect fuel system
- Check drive belts
- Inspect exhaust system
Perform visual inspection of engine components
- Replace spark plugs
- Replace serpentine belt
- Inspect cooling system
- Check ignition system
Replace coolant every 4 years regardless of mileage
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2017-Present BMW 535i?
What is the horsepower and torque output of the 3.0L engine in the 2017-Present BMW 535i?
The 3.0L turbocharged inline-6 engine in the BMW 535i produces 300 horsepower at 5,500-6,500 rpm and 300 lb-ft of torque at 1,380-5,000 rpm.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved performance and efficiency.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The recommended oil type is BMW Longlife-01 FE 0W-30 or equivalent. The oil capacity is approximately 6.5 liters (6.9 quarts).
Q4 What is the service interval for spark plugs on the 3.0L engine?
What is the service interval for spark plugs on the 3.0L engine?
The spark plugs should be replaced every 60,000 miles or as specified in the vehicle's maintenance schedule.
Q5 Does the 3.0L engine require premium fuel?
Does the 3.0L engine require premium fuel?
Yes, the 3.0L engine is designed to run on premium unleaded fuel with an octane rating of 91 or higher for optimal performance and efficiency.
Q6 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio of the 3.0L engine is 10.2:1, which contributes to its balance of power and efficiency.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 535i Owner's Manual
Coming SoonOfficial owner's manual for the 2017-Present BMW 535i, including detailed maintenance schedules and technical specifications.
3.0L Engine Maintenance Guide
Coming SoonComprehensive guide to maintaining the 3.0L engine, including oil change procedures, spark plug replacement, and more.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other vehicle systems.
Turbocharger Service and Care
Coming SoonLearn about the turbocharger system in the 3.0L engine, including maintenance tips and common issues.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.