BMW 535i 2011-2016

BMW 535i 2011-2016 3.0L Engine Specifications

Detailed technical specifications for the 2011-2016 BMW 535i 3.0L N55 turbocharged inline-6 engine. Includes performance metrics, maintenance guidelines, and repair information.

Updated Oct 24, 2023

Overview Specifications

Comprehensive description of the 3.0l-engine specifications for the 2011-2016 BMW 535I, including key features, measurements, and technical details

How to Use

Use the search function to locate specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.

Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.

Key Specifications

Displacement

3.0 liters (2,979 cc)

Horsepower

300 hp at 5,800 rpm

Torque

300 lb-ft at 1,200-5,000 rpm

Compression Ratio

10.2:1

Oil Capacity

6.5 liters (6.9 quarts)

Available Specifications

Engine Performance

Detailed information on the performance characteristics of the 3.0l-engine, including power output, torque, and fuel efficiency

Power Output

300 horsepower (hp) at 5,800 rpm
300 lb-ft of torque at 1,200-5,000 rpm
Direct fuel injection system for optimized combustion
TwinPower Turbo technology for enhanced performance
Compression ratio of 10.2:1

Fuel Efficiency

EPA-estimated 20 mpg city / 30 mpg highway
Combined fuel economy of 24 mpg
Auto Start-Stop function for reduced fuel consumption
Valvetronic variable valve lift system for improved efficiency
CO2 emissions of 213 g/km

Note: Fuel efficiency may vary based on driving conditions and vehicle configuration.

Engine Design

Technical details about the design and construction of the 3.0l-engine, including materials, dimensions, and layout

Engine Block and Components

Aluminum engine block for reduced weight
Forged steel crankshaft for durability
Double-VANOS variable camshaft timing
Chain-driven timing system for reliability
Cylinder bore diameter of 84.0 mm

Cooling and Lubrication

Water-cooled intercooler for optimal charge air cooling
Electric water pump for efficient cooling
Oil capacity of 6.5 liters (6.9 quarts)
Synthetic engine oil recommended (SAE 5W-30)
Oil change interval of 10,000 miles or 12 months

Note: Use only BMW-approved engine oil to maintain warranty and performance.

Engine Management

Details on the engine control systems, including sensors, electronics, and software

Engine Control Unit (ECU)

Bosch MEVD17.2.6 ECU for precise engine management
Integrated knock control system for optimized combustion
Adaptive transmission control for smooth shifting
Onboard diagnostics (OBD-II) compliant
Software updates available via BMW dealerships

Sensors and Actuators

High-pressure fuel rail sensor for accurate fuel delivery
Mass airflow sensor (MAF) for optimal air-fuel mixture
Exhaust gas temperature sensor for emissions control
Electronic throttle control for responsive acceleration
Variable valve timing actuators for improved efficiency

Note: Regular sensor diagnostics are recommended to ensure optimal performance.

Emissions and Compliance

Information on the engine's emissions systems and compliance with environmental standards

Exhaust System

Twin-scroll turbocharger for reduced emissions
Catalytic converter with oxygen sensors
Particulate filter for diesel models (if applicable)
Exhaust gas recirculation (EGR) system
Compliant with Euro 5 and ULEV II emissions standards

Environmental Features

Start-Stop system for reduced idling emissions
Regenerative braking system for energy recovery
Low-rolling-resistance tires for improved efficiency
Eco Pro driving mode for optimized fuel consumption
Recyclable materials used in engine construction

Note: Eco Pro mode adjusts throttle response and climate control for maximum efficiency.

Search Specifications

Search by specification name, value, or description

Engine Specifications

General Specifications

Engine Code: N55B30

Displacement: 3.0 liters

Configuration: Inline 6-cylinder

Aspiration: TwinPower Turbo

Fuel Type: Premium unleaded gasoline (91 AKI minimum)

Manufacturer: BMW AG

Production Years: 2011-2016

Performance Specifications

Horsepower: 300 hp @ 5800-6000 rpm

Torque: 300 lb-ft @ 1200-5000 rpm

Compression Ratio: 10.2:1

Redline: 7000 rpm

Maximum Boost Pressure: 8.8 psi

Dimensions And Weight

Engine Length: 24.8 inches

Engine Width: 28.3 inches

Engine Height: 23.6 inches

Dry Weight: 403 lbs

Oil Capacity: 6.5 quarts

Fuel System

Fuel injection: Direct injection

Fuel Pump Type: High-pressure electric fuel pump

Fuel Pressure: 2175 psi

Fuel Filter Part Number: 13-32-7-616-372

Ignition System

Ignition Type: Coil-on-plug

Spark Plug Gap: 0.028-0.032 inches

Spark Plug Torque: 18-22 Nm

Spark Plug Part Number: 12-12-0-037-525

Cooling System

Coolant Capacity: 10.6 quarts

Thermostat Opening Temperature: 97°C

Radiator Part Number: 17-11-7-616-123

Water Pump Type: Electric

Lubrication System

Oil Type: BMW Longlife-01 FE 5W-30

Oil Filter Part Number: 11-42-7-616-864

Oil Pressure: 29-43 psi at 2000 rpm

Oil Change interval: 10,000 miles or 12 months

Valvetrain Specifications

Valve Configuration: DOHC, 4 valves per cylinder

Valve Material: Hollow-stem intake valves, sodium-filled exhaust valves

Valve Clearance: Hydraulic lifters, no adjustment required

Camshaft Material: Forged steel

Turbocharger Specifications

Turbo Type: Twin-scroll turbocharger

Wastegate Control: Electronic

Turbo Boost Control Solenoid Part Number: 11-75-7-616-123

Maximum Turbo Speed: 240,000 rpm

Emissions System

Emissions Standard: ULEV II

Catalytic Converter Part Number: 18-30-7-616-123

Oxygen Sensor Type: Wideband

EGR System: None (uses Valvetronic and VANOS for emissions control)

Maintenance Specifications

Timing Chain Replacement Interval: Lifetime (inspect every 100,000 miles)

Serpentine Belt Replacement Interval: 60,000 miles

Spark Plug Replacement interval: 60,000 miles

Coolant Replacement interval: 4 years or 60,000 miles

Diagnostic Specifications

OBDII Protocol: ISO 15765-4 (CAN)

Fault Code Reading: BMW-specific codes via ISTA/D or compatible scan tool

Common Fault Codes

2C58: Charging pressure control, plausibility
2C7B: Mixture control 2, too lean
2C7C: Mixture control 2, too rich

Diagnostic Connector Location: Under dashboard, driver's side

Service Information Service

Detailed service requirements and schedules for the 3.0L N55 engine

10,000

Oil and filter change
Inspect brake system
Check tire pressure and condition
Reset service indicator

Use only BMW-approved oil and filters

30,000

Replace air filter
Inspect fuel system
Check VANOS system operation
Inspect turbocharger system

Perform VANOS test plan using ISTA/D

60,000

Replace spark plugs
Replace serpentine belt
Inspect timing chain and guides
Replace coolant

Check for timing chain stretch using ISTA/D

100,000

120

Inspect and replace valve cover gasket if necessary
Inspect and replace oil filter housing gasket if necessary
Inspect turbocharger wastegate and actuator
Perform complete engine diagnostic

Check for common oil leaks at valve cover and oil filter housing

Common Questions

Find answers to common questions about torque specifications

What is the horsepower and torque output of the 3.0L N55 engine in the 2011-2016 BMW 535i?

The 3.0L N55 turbocharged inline-6 engine produces 300 horsepower at 5,800-6,000 RPM and 300 lb-ft of torque at 1,200-5,000 RPM. This engine features BMW's TwinPower Turbo technology, Valvetronic variable valve timing, and direct fuel injection.

What type of oil and oil capacity does the 3.0L N55 engine require?

The 3.0L N55 engine requires synthetic oil meeting BMW Longlife-01 or LL-01 FE specifications. The oil capacity is approximately 6.5 liters (6.9 quarts) with a filter change. Always use oil with a viscosity of SAE 5W-30 or 5W-40 for optimal performance.

What is the recommended service interval for the 3.0L N55 engine?

BMW recommends an oil change every 10,000 miles or 12 months, whichever comes first. Additional service intervals include spark plug replacement every 60,000 miles, air filter replacement every 30,000 miles, and coolant flush every 4 years or 60,000 miles.

What are common issues with the 3.0L N55 engine?

Common issues include high-pressure fuel pump (HPFP) failures, valve cover gasket leaks, oil filter housing gasket leaks, and turbocharger wastegate rattle. Regular maintenance and using genuine BMW parts can mitigate these issues.

What is the compression ratio of the 3.0L N55 engine?

The 3.0L N55 engine has a compression ratio of 10.2:1, which is optimized for performance and efficiency with its turbocharging system and direct fuel injection.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW N55 Engine Technical Training Manual

Coming Soon

Detailed technical guide covering the design, operation, and maintenance of the N55 engine, including schematics and troubleshooting tips.

BMW 535i Owner's Manual (2011-2016)

Coming Soon

Official owner's manual for the BMW 535i, including maintenance schedules, fluid specifications, and safety information.

N55 Engine Maintenance Checklist

Coming Soon

A comprehensive checklist for maintaining the N55 engine, including part numbers, torque specifications, and recommended service intervals.

BMW Genuine Parts Catalog

Coming Soon

Access to BMW's official parts catalog for the 3.0L N55 engine, ensuring the use of genuine components for repairs and maintenance.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.