BMW 530i 2017-present

BMW 530i 2017-present Fuel System Specifications

Explore the detailed fuel system specifications for the 2017-Present BMW 530I, including fuel type, pressure, injector details, and pump requirements. Essential for technicians and enthusiasts.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the fuel specifications for the 2017-Present BMW 530I, including key features, measurements, and technical details

How to Use

Use the search function to locate specific fuel specifications by entering keywords such as 'octane rating', 'fuel tank capacity', or 'fuel system type'.

Navigate through the fuel documentation sections using the table of contents or by scrolling through the document. Each section is labeled with a major title and contains subsections for detailed information.

Key Specifications

Fuel Type

Premium unleaded (91 AKI / 95 RON)

Fuel Tank Capacity

17.7 gallons (67 liters)

Fuel Injection Pressure

Up to 200 bar (2900 psi)

Combined Fuel Economy

28 MPG (8.4 L/100 km)

CO2 Emissions

192 g/km

Available Specifications

Fuel Type and Quality

Details about the recommended fuel type, quality standards, and octane ratings for optimal performance

Recommended Fuel Type

Premium unleaded gasoline with an octane rating of 91 AKI (95 RON) or higher
Minimum octane rating of 89 AKI (91 RON) is acceptable but may reduce performance
Use of lower octane fuel may cause engine knocking and reduced efficiency
BMW recommends using Top Tier detergent gasoline for optimal engine cleanliness

Fuel Quality Standards

Complies with ASTM D4814 (US) and EN 228 (Europe) standards
Must be free of methanol or contain no more than 0.15% by volume
Ethanol content should not exceed 10% (E10)
Avoid using fuels with metallic additives or high sulfur content

Note: Using non-recommended fuels may void the vehicle's warranty.

Fuel System Specifications

Technical details about the fuel system, including tank capacity, injection type, and pressure specifications

Fuel Tank Capacity

Total fuel tank capacity: 17.7 gallons (67 liters)
Reserve fuel capacity: 2.1 gallons (8 liters)
Fuel tank material: High-density polyethylene (HDPE)
Fuel tank design: Multi-chambered for improved safety and efficiency

Fuel Injection System

Direct fuel injection system with high-pressure injectors
Injection pressure: Up to 200 bar (2900 psi)
Electronically controlled multi-point injection
Optimized for precise fuel delivery and combustion efficiency

Fuel Consumption and Efficiency

Information about fuel consumption rates, efficiency metrics, and environmental impact

Fuel Economy Ratings

City: 24 MPG (9.8 L/100 km)
Highway: 34 MPG (6.9 L/100 km)
Combined: 28 MPG (8.4 L/100 km)
CO2 emissions: 192 g/km (combined)

Efficiency Features

Auto Start-Stop function to reduce idle fuel consumption
Eco Pro mode for optimized throttle response and fuel efficiency
Regenerative braking system to recover energy
Lightweight materials and aerodynamic design for improved efficiency

Note: Actual fuel economy may vary based on driving conditions and habits.

Fuel System Maintenance

Guidelines for maintaining the fuel system, including filter replacement and cleaning procedures

Fuel Filter Replacement

Fuel filter replacement interval: Every 60,000 miles (96,000 km)
Filter type: High-efficiency particulate filter
Location: Integrated into the fuel pump module
Replacement requires professional service due to high-pressure system

Fuel System Cleaning

Recommended cleaning interval: Every 30,000 miles (48,000 km)
Use BMW-approved fuel system cleaners
Inspect fuel injectors for deposits during service
Ensure proper sealing of fuel lines and connections

Note: Regular maintenance ensures optimal fuel system performance and longevity.

Search Specifications

Search by specification name, value, or description

Component Specifications

Fuel Type

Recommended Fuel: Premium unleaded gasoline (91 AKI or 95 RON)

Minimum Fuel: Regular unleaded gasoline (87 AKI or 91 RON)

Ethanol Content: Up to 10% ethanol (E10)

Notes: Using fuel with higher ethanol content may void warranty and affect performance

Fuel System

Fuel Delivery: Direct injection

Fuel Pump Pressure: 50-200 bar (725-2900 psi)

Fuel Filter Part Number: 13-32-7-581-466

Fuel injector Part Number: 13-62-7-852-321

Notes: Fuel system designed for high-pressure operation to optimize combustion efficiency

Fuel Tank

Capacity: 17.7 gallons (67 liters)

Material: High-density polyethylene

Fuel Level Sensor Part Number: 16-14-7-070-123

Notes: Tank includes integrated baffles to prevent fuel sloshing

Fuel Quality

Octane Rating: 91 AKI (95 RON) recommended

Sulfur Content: Maximum 10 ppm

Additives: BMW-approved fuel additives recommended

Notes: Low-quality fuel may cause engine knocking and reduced performance

Fuel Economy

City: 24 mpg

Highway: 34 mpg

Combined: 28 mpg

Notes: Economy figures based on EPA testing with premium fuel

Emissions

Emission Standard: Euro 6d-TEMP / Tier 3 Bin 125

CO2 Emissions: 149 g/km

NOx Emissions: 0.02 g/km

Notes: Complies with strict global emission standards

Fuel Pressure Regulator

Part Number: 13-51-7-581-234

Operating Pressure: 3.8 bar (55 psi)

Tolerance: ±0.2 bar (±3 psi)

Notes: Maintains consistent fuel pressure for optimal engine performance

Fuel Pump

Part Number: 16-14-7-581-345

Flow Rate: 120 liters/hour (31.7 gallons/hour)

Voltage: 12V

Current Draw: 5-7 amps

Notes: Electric in-tank fuel pump with integrated fuel level sensor

Fuel injectors

Type: Solenoid-operated

Flow Rate: 15.5 cc/min at 3 bar (43.5 psi)

Spray Pattern: Multi-hole

Notes: Precision-engineered for efficient fuel atomization

Diagnostics

Fuel System Codes

P0171
P0172
P0181
P0191

Diagnostic Tool: BMW ISTA or compatible OBD-II scanner

Notes: Regular diagnostics recommended to detect fuel system issues early

Service Information Service

Detailed service requirements and schedules for the fuel system

10,000 miles

12 months

Inspect fuel lines and connections
Check fuel filter condition
Verify fuel pressure readings

Replace fuel filter every 30,000 miles or as needed

30,000 miles

36 months

Replace fuel filter
Inspect fuel injectors
Clean fuel system with approved additives

Use BMW-approved fuel system cleaner for optimal results

60,000 miles

72 months

Replace fuel pump if necessary
Inspect fuel tank for leaks or damage
Perform full fuel system diagnostic

Fuel pump replacement recommended if performance issues are detected

Frequently Asked Questions

Find answers to common questions about torque specifications

What type of fuel is recommended for the 2017-Present BMW 530i?

The BMW 530i requires premium unleaded gasoline with an octane rating of 91 or higher. Using lower octane fuel may result in reduced performance and efficiency.

What is the fuel tank capacity of the BMW 530i?

The fuel tank capacity of the BMW 530i is 18.0 gallons (68.1 liters). This allows for an estimated range of approximately 500-600 miles depending on driving conditions.

Can I use ethanol-blended fuel in the BMW 530i?

Yes, the BMW 530i can use ethanol-blended fuels containing up to 10% ethanol (E10). However, fuels with higher ethanol content (e.g., E15 or E85) are not recommended as they may cause engine damage and void the warranty.

What is the fuel economy of the BMW 530i?

The BMW 530i achieves an EPA-estimated fuel economy of 25 mpg in the city and 34 mpg on the highway, with a combined rating of 28 mpg. Actual mileage may vary based on driving habits and conditions.

Does the BMW 530i have a fuel-saving feature?

Yes, the BMW 530i is equipped with an Auto Start-Stop function that temporarily shuts off the engine when the vehicle is stationary, such as at traffic lights, to reduce fuel consumption and emissions.

What should I do if I accidentally use the wrong type of fuel?

If you accidentally use fuel with an octane rating below 91 or a high ethanol blend, avoid driving the vehicle and contact a BMW-certified technician immediately. Running the engine with improper fuel can cause severe damage and void the warranty.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW Fuel System Overview

Coming Soon

Detailed guide on the fuel system components, operation, and maintenance for the BMW 530i.

Fuel Efficiency Tips for BMW Vehicles

Coming Soon

Learn how to maximize fuel efficiency and reduce emissions with proper driving techniques and maintenance.

BMW Fuel Additives and Cleaners

Coming Soon

Information on approved fuel additives and cleaners to maintain optimal engine performance and fuel system health.

BMW Warranty and Fuel-Related Issues

Coming Soon

Understand how using improper fuel or neglecting maintenance can impact your BMW warranty coverage.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.