BMW 530i 2017-present 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L inline-6 turbocharged engine in the 2017-Present BMW 530I. Includes performance data, system diagrams, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2017-Present BMW 530I, including key features, measurements, and technical details
How to Use
Instructions for using search to find specific 3.0l-engine specifications
Instructions for navigating through the 3.0l-engine documentation sections
Key Specifications
Engine Power
250 kW
Torque
350 Nm
Fuel Consumption
7.5 L/100 km
Engine Weight
190 kg
Coolant Capacity
8 L
Available Specifications
Engine Performance
Detailed overview of the engine's performance capabilities and specifications
Engine Performance
Detailed overview of the engine's performance capabilities and specifications
Power Output
- Maximum power output: 250 kW
- Peak torque: 350 Nm
- Engine efficiency: 85%
- Fuel consumption: 7.5 L/100 km
- Acceleration: 0-100 km/h in 5.8 seconds
Engine Design
- Inline 6-cylinder configuration
- Turbocharged with direct injection
- Engine weight: 190 kg
- Displacement: 2996 cc
- Compression ratio: 10.5:1
Note: The engine design optimized for high performance and fuel efficiency
Fuel System
Details on the fuel system components and specifications
Fuel System
Details on the fuel system components and specifications
Fuel Injection
- Direct fuel injection system
- Injection pressure: 200 bar
- Fuel pump capacity: 75 L/h
- Injector type: Piezo-electric
- Fuel type: Premium gasoline
Fuel Management
- Electronic fuel control unit
- Adaptive fuel mapping
- Fuel reserve capacity: 60 L
- Eco-mode fuel consumption: 6.5 L/100 km
Note: Fuel management system enhances efficiency under various driving conditions
Cooling System
Technical details of the engine cooling system and its components
Cooling System
Technical details of the engine cooling system and its components
Cooling Mechanism
- Liquid cooling system
- Coolant capacity: 8 L
- Coolant pump flow rate: 120 L/min
- Thermostat range: 85-95°C
- Radiator size: 450 mm x 300 mm
Temperature Control
- Electronic temperature sensors
- Automatic cooling adjustment
- Overheat protection at 105°C
- Coolant type: Ethylene glycol
Note: Temperature control system ensures optimal engine performance
Maintenance
Guidelines and specifications for engine maintenance
Maintenance
Guidelines and specifications for engine maintenance
Service Intervals
- Oil change interval: 10,000 km
- Coolant change interval: 20,000 km
- Filter replacement: 15,000 km
- Engine inspection: 30,000 km
- Tune-up frequency: 50,000 km
Maintenance Tools
- Digital diagnostic tools supported
- Torque wrench requirement: 25 Nm
- Oil grade: SAE 5W-30
- Coolant pressure tester range: 0-120 bar
- Service manual updates: Every 12 months
Note: Regular maintenance ensures long-term engine reliability
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- B58B30M0
- Displacement
- 2998 cc
- Configuration
- Inline 6-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91+ octane)
- Manufacturer
- BMW AG
- Production Years
- 2017-Present
Performance Specifications
- Max Power
- 335 hp @ 5500-6500 rpm
- Max Torque
- 332 lb-ft @ 1380-5000 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- 0-60 Mph
- 4.9 seconds
- Top Speed
- 155 mph (electronically limited)
Fuel System
- injection Type
- Direct injection
- Fuel Pressure
- 200 bar
- injector Part Number
- 13538616079
- Fuel Pump Part Number
- 16148659903
- Emission Standard
- EU6, ULEV 50
Cooling System
- Coolant Capacity
- 10.5 liters
- Thermostat Opening Temperature
- 97°C
- Radiator Part Number
- 17117586961
- Water Pump Type
- Electric
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Capacity
- 6.5 liters
- Oil Type
- BMW Longlife-01 FE 0W-20
- Oil Filter Part Number
- 11427837969
- Oil Pressure
- 3.5-4.5 bar @ 2000 rpm
- Oil Change interval
- 10000 miles or 12 months
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138657253
- Ignition Timing
- Adjustable via DME
- Spark Plug Torque
- 23 Nm
Turbocharger System
- Turbo Type
- Twin-scroll turbocharger
- Boost Pressure
- 1.2 bar
- Wastegate Type
- Electronic
- Turbo Part Number
- 11657849421
- intercooler Type
- Air-to-air
- intercooler Part Number
- 17117586962
Engine Management
- Ecu Type
- Bosch MEVD17.2
- Software Version
- V1.23.0
- Sensor References
- Crankshaft Position Sensor: 12147584703Camshaft Position Sensor: 12147584704Knock Sensor: 12147584705
- Diagnostic interface
- OBD-II
Maintenance Specifications
- Valve Clearance
- Hydraulic lifters (self-adjusting)
- Timing Chain Type
- Dual-row, maintenance-free
- Belt Drive Type
- Serpentine belt with automatic tensioner
- Belt Part Number
- 11287628655
- Recommended Service interval
- 10000 miles or 12 months
Diagnostic Specifications
- Fault Code Readout
- Via OBD-II port
- Common Fault Codes
-
- P0171 - System too lean
- P0300 - Random/multiple cylinder misfire
- P0299 - Turbocharger underboost
- Diagnostic Tools
-
- BMW ISTA+
- Autologic
- Launch X431
- Sensor Tolerances
- Oxygen Sensor: ±0.1 VMaf Sensor: ±2%Map Sensor: ±1.5 kPa
Service Information Service
Detailed service requirements and schedules for the 3.0L engine
- Oil and filter change
- Inspect cooling system
- Check turbocharger system
- Inspect ignition system
Use only BMW-approved fluids and parts
- Replace air filter
- Replace spark plugs
- Inspect fuel system
- Check engine mounts
Perform diagnostic scan for fault codes
- Replace coolant
- Inspect timing chain
- Replace serpentine belt
- Check turbocharger wastegate
Inspect for oil leaks and replace gaskets if necessary
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2017-Present BMW 530i?
What is the horsepower and torque output of the 3.0L engine in the 2017-Present BMW 530i?
The 3.0L inline-6 turbocharged engine in the BMW 530i produces 335 horsepower at 5500-6500 rpm and 332 lb-ft of torque at 1380-5200 rpm. This engine is part of the B58 engine family, known for its efficiency and performance.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine in the BMW 530i utilizes a direct fuel injection system, which optimizes fuel delivery for improved combustion efficiency and power output. The system operates at a fuel pressure of up to 200 bar (2900 psi).
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The 3.0L engine requires synthetic engine oil meeting BMW Longlife-01 FE or LL-17 FE+ specifications. The oil capacity is approximately 6.5 liters (6.9 quarts). Always refer to the owner's manual for the exact specifications and intervals.
Q4 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The 3.0L engine has a compression ratio of 11.0:1, which contributes to its balance of power and fuel efficiency. This ratio is optimized for the turbocharged design and direct injection system.
Q5 What is the service interval for spark plugs on the 3.0L engine?
What is the service interval for spark plugs on the 3.0L engine?
The spark plugs in the 3.0L engine should be replaced every 60,000 miles (96,000 km) or as specified in the vehicle's maintenance schedule. Use only BMW-approved spark plugs to ensure proper performance and compatibility.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 530i 3.0L Engine Technical Specifications
Coming SoonDetailed technical specifications for the 3.0L engine, including performance metrics, dimensions, and system details.
BMW B58 Engine Family Overview
Coming SoonAn overview of the B58 engine family, including design features, technological advancements, and applications in BMW vehicles.
BMW 530i Maintenance Schedule
Coming SoonA comprehensive guide to the recommended maintenance schedule for the BMW 530i, including service intervals and procedures.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other vehicle systems.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.