BMW 530i 2017-present 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine (B48) in the 2017-Present BMW 530I. Includes performance data, maintenance guidelines, and repair instructions.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2017-Present BMW 530I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 2.0l-engine specifications by entering keywords such as 'engine displacement', 'torque', or 'fuel system'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Displacement
2.0 liters (1998 cc)
Power Output
248 hp (184 kW)
Torque
258 lb-ft (350 Nm)
Fuel System
Direct Injection
Compression Ratio
11.0:1
Available Specifications
Engine Design and Architecture
Details about the design, architecture, and key components of the 2.0l-engine
Engine Design and Architecture
Details about the design, architecture, and key components of the 2.0l-engine
Engine Type and Configuration
- 2.0-liter inline 4-cylinder engine
- Turbocharged with TwinPower Turbo technology
- Direct fuel injection system
- Aluminum alloy cylinder head and block
- DOHC (Double Overhead Camshaft) design
Combustion System
- High-precision direct injection with up to 200 bar fuel pressure
- Variable valve timing (Double-VANOS)
- Valvetronic fully variable valve lift control
- Compression ratio: 11.0:1
- Optimized combustion chamber design for efficiency
Note: The Valvetronic system eliminates the need for a traditional throttle valve, improving responsiveness and efficiency.
Performance Specifications
Technical details about the engine's performance, including power output and torque
Performance Specifications
Technical details about the engine's performance, including power output and torque
Power and Torque Output
- Maximum power output: 248 hp (184 kW) at 5200-6500 rpm
- Peak torque: 258 lb-ft (350 Nm) at 1450-4800 rpm
- Redline: 7000 rpm
- 0-60 mph acceleration: 6.0 seconds (approx.)
- Top speed: 130 mph (electronically limited)
Fuel Efficiency
- EPA-estimated fuel economy: 24 mpg city / 34 mpg highway
- CO2 emissions: 161 g/km
- Start-stop technology for reduced idle fuel consumption
- Eco Pro mode for optimized fuel efficiency
- Compatible with premium unleaded gasoline (91 octane or higher)
Cooling and Lubrication Systems
Details about the engine's cooling and lubrication systems
Cooling and Lubrication Systems
Details about the engine's cooling and lubrication systems
Cooling System
- Liquid-cooled with electric water pump
- Dual-temperature control system for optimized thermal management
- Radiator size: 600 mm x 400 mm
- Coolant capacity: 10.5 liters
- Thermostat-controlled cooling for efficient operation
Lubrication System
- Wet sump lubrication system
- Oil capacity: 5.25 liters (with filter)
- Recommended oil grade: SAE 5W-30 or 0W-20
- Oil change interval: 10,000 miles or 12 months
- Oil pump with variable displacement for efficiency
Note: Use only BMW-approved synthetic engine oil for optimal performance and longevity.
Emissions and Exhaust System
Information about the engine's emissions control and exhaust system
Emissions and Exhaust System
Information about the engine's emissions control and exhaust system
Emissions Control
- EU6d-TEMP emissions standard compliant
- Dual catalytic converters for reduced emissions
- Exhaust gas recirculation (EGR) system
- Particulate filter for reduced particulate emissions
- Onboard diagnostics (OBD) for emissions monitoring
Exhaust System
- Stainless steel exhaust manifold
- Twin-pipe exhaust system with chrome tips
- Exhaust gas temperature sensors for precise control
- Active sound design for enhanced driving experience
- Exhaust backpressure: 0.8 bar (max)
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- B48B20
- Displacement
- 1998 cc
- Configuration
- Inline 4-cylinder
- Aspiration
- Turbocharged
- Fuel Type
- Premium unleaded gasoline (91+ octane)
- Manufacturer
- BMW AG
- Production Years
- 2017-Present
Performance Specifications
- Max Power
- 248 hp @ 5200-6500 rpm
- Max Torque
- 258 lb-ft @ 1450-4800 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Fuel System
- Direct injection with High Precision Injection (HPI)
Dimensions And Weight
- Engine Length
- 20.5 in
- Engine Width
- 23.6 in
- Engine Height
- 22.8 in
- Dry Weight
- 297.6 lbs
- Oil Capacity
- 5.2 quarts (with filter)
Cooling System
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor (G48)
- Coolant Capacity
- 10.6 quarts
- Thermostat Opening Temperature
- 97°C (206.6°F)
- Radiator Cap Pressure
- 1.4 bar (20.3 psi)
Lubrication System
- Oil Type
- BMW Longlife-01 FE 0W-20 or 5W-30
- Oil Pressure
- 2.5-4.5 bar (36.3-65.3 psi) at 2000 rpm
- Oil Filter Part Number
- 11 42 7 566 327
- Oil Change interval
- 10,000 miles or 12 months
Ignition System
- Spark Plug Type
- Bosch ZR5TPP330
- Spark Plug Gap
- 0.028-0.032 in
- Ignition Coil Part Number
- 12 13 7 566 328
- Ignition Timing
- Fully electronic, controlled by DME
Fuel System
- Fuel Pump Pressure
- 5.0 bar (72.5 psi)
- injector Part Number
- 13 53 7 566 329
- Fuel Filter Part Number
- 13 32 7 566 330
- Fuel Tank Capacity
- 17.7 gallons
Emissions System
- Emission Standard
- EU6 / Tier 3
- Catalytic Converter Part Number
- 18 30 7 566 331
- Oxygen Sensor Part Number
- 11 78 7 566 332
- EGR System
- Integrated into turbocharger design
Maintenance Specifications
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Lifetime lubrication, no scheduled replacement
- Belt Drive
- Serpentine belt replacement interval: 60,000 miles
- Air Filter Part Number
- 13 72 7 566 333
- Cabin Filter Part Number
- 64 31 9 366 334
Diagnostic Specifications
- OBDII Port Location
- Under dashboard, driver's side
- Diagnostic Codes
- Compatible with BMW ISTA/D
- Readiness Monitors
- Supports all OBDII monitors
- Scan Tool Requirements
- BMW-specific protocols required
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Oil and filter change
- Inspect brake system
- Check coolant level
- Inspect belts and hoses
Use only BMW-approved fluids and parts
- Replace air filter
- Replace cabin filter
- Inspect spark plugs
- Check fuel system
Reset service indicator after maintenance
- Replace serpentine belt
- Inspect timing chain
- Check engine mounts
- Inspect exhaust system
Perform comprehensive engine diagnostics
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2017-Present BMW 530i?
What is the horsepower and torque output of the 2.0L engine in the 2017-Present BMW 530i?
The 2.0L turbocharged inline-4 engine in the BMW 530i produces 248 horsepower at 5,200-6,500 rpm and 258 lb-ft of torque at 1,450-4,800 rpm.
Q2 What type of fuel system does the 2.0L engine use?
What type of fuel system does the 2.0L engine use?
The 2.0L engine utilizes a high-precision direct injection fuel system, which optimizes fuel delivery for improved efficiency and performance.
Q3 What is the recommended oil type and capacity for the 2.0L engine?
What is the recommended oil type and capacity for the 2.0L engine?
The recommended oil type is BMW TwinPower Turbo Longlife-01 FE 0W-20 or equivalent. The oil capacity is approximately 5.0 liters (5.3 quarts).
Q4 What is the compression ratio of the 2.0L engine?
What is the compression ratio of the 2.0L engine?
The compression ratio of the 2.0L engine is 11.0:1, which contributes to its balance of power and efficiency.
Q5 Does the 2.0L engine require premium fuel?
Does the 2.0L engine require premium fuel?
Yes, BMW recommends using premium unleaded gasoline with an octane rating of 91 or higher for optimal performance and fuel efficiency.
Q6 What is the service interval for spark plugs on the 2.0L engine?
What is the service interval for spark plugs on the 2.0L engine?
The spark plugs should be replaced every 60,000 miles or as specified in the vehicle's maintenance schedule, whichever comes first.
Q7 What is the engine displacement of the 2.0L engine?
What is the engine displacement of the 2.0L engine?
The engine displacement is 1,998 cc (2.0 liters), with a bore of 82.0 mm and a stroke of 94.6 mm.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 530i Owner's Manual
Coming SoonThe official owner's manual for the BMW 530i, providing detailed information on vehicle operation, maintenance, and specifications.
BMW Technical Service Bulletins
Coming SoonAccess the latest technical service bulletins (TSBs) for the 2.0L engine, including updates and fixes from BMW.
BMW Genuine Parts Catalog
Coming SoonExplore the catalog of genuine BMW parts for the 2.0L engine, ensuring compatibility and performance.
BMW Maintenance Schedule
Coming SoonDetailed maintenance schedule for the 2017-Present BMW 530i, including service intervals for the 2.0L engine.
BMW Warranty Information
Coming SoonComprehensive guide to BMW's warranty coverage, including terms and conditions specific to the 2.0L engine.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.