BMW 530i 2011-2016 Body Specifications
Detailed technical specifications and documentation for the body system of the 2011-2016 BMW 530I. Includes body dimensions, materials, structural components, and repair guidelines for accurate maintenance and service.
Overview Specifications
Comprehensive description of the body specifications for the 2011-2016 BMW 530I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'weight'.
Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.
Key Specifications
Overall Length
4899 mm
Curb Weight
1610 kg
Drag Coefficient
0.28
Trunk Volume
520 liters
Wheelbase
2968 mm
Available Specifications
Exterior Dimensions
Detailed measurements and specifications for the exterior dimensions of the BMW 530I
Exterior Dimensions
Detailed measurements and specifications for the exterior dimensions of the BMW 530I
Overall Length, Width, and Height
- Overall length: 4899 mm
- Overall width (including mirrors): 2148 mm
- Overall height: 1464 mm
- Wheelbase: 2968 mm
- Track width (front/rear): 1600 mm / 1627 mm
Ground Clearance and Weight
- Ground clearance: 140 mm
- Curb weight: 1610 kg
- Gross vehicle weight: 2130 kg
- Payload capacity: 520 kg
Note: Ground clearance may vary slightly depending on tire size and suspension settings.
Body Structure and Materials
Information on the construction materials and structural design of the BMW 530I body
Body Structure and Materials
Information on the construction materials and structural design of the BMW 530I body
Body Construction
- Unibody construction with high-strength steel
- Aluminum hood and front fenders for weight reduction
- Acoustic windshield for noise reduction
- Drag coefficient (Cd): 0.28
Corrosion Protection
- Hot-dip galvanized steel panels
- Cathodic dip coating for enhanced corrosion resistance
- 12-year anti-corrosion warranty
- Underbody protection with PVC coating
Interior Dimensions and Capacity
Detailed measurements and specifications for the interior space and cargo capacity
Interior Dimensions and Capacity
Detailed measurements and specifications for the interior space and cargo capacity
Passenger Space
- Headroom (front/rear): 994 mm / 949 mm
- Legroom (front/rear): 1054 mm / 954 mm
- Shoulder room (front/rear): 1450 mm / 1430 mm
- Hip room (front/rear): 1400 mm / 1380 mm
Cargo Capacity
- Trunk volume: 520 liters
- Maximum cargo capacity (rear seats folded): 1560 liters
- Load width between wheel arches: 1040 mm
- Load height: 500 mm
Note: Cargo capacity may vary depending on optional equipment and configuration.
Aerodynamics and Fuel Efficiency
Details on the aerodynamic design and its impact on fuel efficiency
Aerodynamics and Fuel Efficiency
Details on the aerodynamic design and its impact on fuel efficiency
Aerodynamic Features
- Active air flap control for improved airflow
- Aerodynamically optimized underbody panels
- Rear spoiler integrated into the trunk lid
- Air curtains for reduced turbulence around the wheels
Fuel Efficiency Impact
- Drag coefficient (Cd): 0.28
- Reduced fuel consumption by up to 2% due to aerodynamic design
- Improved high-speed stability
- Lower wind noise at highway speeds
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 4907 mm
- Overall Width
- 1860 mm
- Overall Height
- 1464 mm
- Wheelbase
- 2968 mm
- Track Width Front
- 1600 mm
- Track Width Rear
- 1610 mm
- Ground Clearance
- 140 mm
Weight
- Curb Weight
- 1610 kg
- Gross Vehicle Weight
- 2130 kg
- Payload Capacity
- 520 kg
- Front Axle Load
- 920 kg
- Rear Axle Load
- 690 kg
Body Materials
- Body Structure
- Steel unibody with aluminum components
- Hood
- Aluminum
- Trunk Lid
- Aluminum
- Doors
- Steel with aluminum reinforcements
- Roof
- Steel with optional carbon fiber reinforcement
Aerodynamics
- Drag Coefficient
- 0.28 Cd
- Frontal Area
- 2.22 m²
- Air Resistance
- 0.62 kN at 100 km/h
Exterior Features
- Headlights
- Bi-Xenon with adaptive cornering
- Taillights
- LED with dynamic turn signals
- Mirrors
- Electrically adjustable, heated, and auto-dimming
- Wipers
- Rain-sensing with heated washer jets
- Sunroof
- Panoramic glass sunroof with one-touch operation
interior Features
- Seating Capacity
- 5
- Seat Materials
- Leather upholstery with optional Nappa leather
- Steering Wheel
- Leather-wrapped with multifunction controls
- Dashboard
- Soft-touch materials with wood or aluminum trim
- Cargo Volume
- 520 liters
Safety Features
- Airbags
- Front: Dual-stage airbagsSide: Thorax and head airbagsCurtain: Full-length side curtain airbags
- Seatbelts
- 3-point seatbelts with pretensioners and force limiters
- Braking System
- ABS with DSC (Dynamic Stability Control)
- Crash Test Rating
- 5-star Euro NCAP
Lighting System
- Headlights
- Type: Bi-XenonOutput: 3200 lumensBeam Range: 150 meters
- Taillights
- Type: LEDOutput: 120 lumensDynamic Signals: Yes
- Fog Lights
- Type: HalogenOutput: 800 lumensBeam Range: 30 meters
Glass And Windows
- Windshield
- Laminated glass with UV protection
- Side Windows
- Tinted glass with acoustic insulation
- Rear Window
- Heated with defogger
- Sunroof Glass
- Tinted with UV protection
Paint And Finish
- Paint Type
- Basecoat/Clearcoat
- Available Colors
-
- Alpine White
- Jet Black
- Space Gray
- Deep Sea Blue
- Mineral White
- Clearcoat Thickness
- 40-60 microns
- Corrosion Warranty
- 12 years/unlimited miles
Service Information Service
Detailed service requirements and schedules for the 2011-2016 BMW 530I body components
- Inspect and clean exterior body panels
- Check and adjust all exterior lighting
- Lubricate door hinges and locks
- Inspect windshield wipers and replace if necessary
Ensure all body components are free from damage and corrosion
- Inspect and clean sunroof mechanism
- Check and adjust door alignment
- Inspect and clean underbody for debris and corrosion
- Check and tighten all exterior trim and moldings
Pay special attention to areas prone to rust and wear
- Inspect and replace weather stripping if necessary
- Check and adjust hood and trunk alignment
- Inspect and clean all exterior sensors and cameras
- Perform a full exterior detailing and wax application
Ensure all body seals are intact to prevent water ingress
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the exterior dimensions of the 2011-2016 BMW 530i?
What are the exterior dimensions of the 2011-2016 BMW 530i?
The 2011-2016 BMW 530i has an overall length of 193.1 inches, a width of 73.2 inches (excluding mirrors), and a height of 57.6 inches. The wheelbase measures 116.9 inches, and the track width is 62.1 inches (front) and 63.1 inches (rear).
Q2 What materials are used in the body construction of the 2011-2016 BMW 530i?
What materials are used in the body construction of the 2011-2016 BMW 530i?
The body of the 2011-2016 BMW 530i is constructed using a combination of high-strength steel, aluminum, and lightweight composite materials. The hood and front fenders are made of aluminum to reduce weight and improve weight distribution.
Q3 What is the curb weight of the 2011-2016 BMW 530i?
What is the curb weight of the 2011-2016 BMW 530i?
The curb weight of the 2011-2016 BMW 530i varies depending on the trim and options, but it typically ranges from 3,726 lbs (1,690 kg) to 3,902 lbs (1,770 kg).
Q4 What type of paint finish is used on the 2011-2016 BMW 530i?
What type of paint finish is used on the 2011-2016 BMW 530i?
The 2011-2016 BMW 530i features a multi-layer paint finish, including a base coat, color coat, and clear coat. This provides enhanced durability, UV resistance, and a high-gloss appearance.
Q5 What is the drag coefficient of the 2011-2016 BMW 530i?
What is the drag coefficient of the 2011-2016 BMW 530i?
The 2011-2016 BMW 530i has a drag coefficient (Cd) of 0.29, which contributes to its aerodynamic efficiency and fuel economy.
Q6 Are there any specific maintenance requirements for the body of the 2011-2016 BMW 530i?
Are there any specific maintenance requirements for the body of the 2011-2016 BMW 530i?
Regular maintenance for the body includes washing and waxing to protect the paint finish, inspecting for rust or corrosion, and ensuring proper alignment of body panels. BMW recommends using only genuine BMW cleaning and care products to maintain the finish and avoid damage.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 5 Series Body Repair Manual
Coming SoonOfficial BMW body repair manual for the 2011-2016 5 Series, including detailed procedures for panel replacement, paint repair, and corrosion protection.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine body components, including panels, trim, and fasteners, for the 2011-2016 530i.
BMW Paint Care Guide
Coming SoonComprehensive guide on maintaining and protecting the paint finish of your 2011-2016 BMW 530i, including recommended products and techniques.
BMW Aerodynamics Overview
Coming SoonTechnical overview of the aerodynamic design features of the 2011-2016 BMW 5 Series, including the 530i, and their impact on performance and efficiency.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.