BMW 435i 2014-2016 3.0L Engine Specifications
Detailed technical specifications and documentation for the 3.0L N55 turbocharged inline-6 engine in the 2014-2016 BMW 435i. Includes performance data, system details, and maintenance guidelines.
Overview Specifications
Comprehensive description of the 3.0l-engine specifications for the 2014-2016 BMW 435I, including key features, measurements, and technical details
How to Use
Use the search function to locate specific 3.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the documentation sections using the table of contents or by scrolling through the major sections and subsections.
Key Specifications
Engine Type
Turbocharged inline-6 (N55B30)
Displacement
2979 cc (3.0 liters)
Horsepower
300 hp @ 5800-6000 rpm
Torque
300 lb-ft @ 1200-5000 rpm
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Performance
Detailed information on the engine's performance capabilities, including power output and torque.
Engine Performance
Detailed information on the engine's performance capabilities, including power output and torque.
Power Output
- Maximum horsepower: 300 hp @ 5800-6000 rpm
- Peak torque: 300 lb-ft @ 1200-5000 rpm
- Redline: 7000 rpm
- Compression ratio: 10.2:1
- Fuel delivery: Direct injection
Acceleration and Top Speed
- 0-60 mph: 5.1 seconds
- Top speed: 155 mph (electronically limited)
- Drag coefficient: 0.29 Cd
- Transmission: 8-speed automatic with manual mode
- Drivetrain: Rear-wheel drive (RWD) or xDrive all-wheel drive (AWD)
Note: Performance figures may vary slightly depending on drivetrain configuration.
Engine Design
Technical details about the engine's design, including materials and construction.
Engine Design
Technical details about the engine's design, including materials and construction.
Engine Block and Components
- Engine type: Turbocharged inline-6 (N55B30)
- Displacement: 2979 cc (3.0 liters)
- Cylinder head material: Aluminum
- Block material: Aluminum with cast iron liners
- Valvetrain: DOHC with VANOS variable valve timing
Cooling and Lubrication
- Cooling system: Liquid-cooled with electric water pump
- Oil capacity: 6.5 liters (with filter)
- Oil type: Synthetic 5W-30 or 5W-40
- Oil change interval: 10,000 miles or 12 months
- Thermostat: Electronically controlled
Note: Always use BMW-approved synthetic oil for optimal performance.
Fuel and Emissions
Information on fuel efficiency, emissions, and related systems.
Fuel and Emissions
Information on fuel efficiency, emissions, and related systems.
Fuel Economy
- City: 20 mpg
- Highway: 30 mpg
- Combined: 24 mpg
- Fuel tank capacity: 15.8 gallons
- Fuel type: Premium unleaded (91 octane or higher)
Emissions and Exhaust
- Emissions standard: Euro 6 / ULEV II
- Catalytic converter: Three-way catalytic converter
- Exhaust system: Dual exhaust with chrome tips
- Particulate filter: Optional diesel particulate filter (DPF)
- CO2 emissions: 199 g/km
Note: Emissions figures are based on standard testing conditions.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine.
Maintenance and Service
Guidelines for maintaining and servicing the 3.0l-engine.
Service Intervals
- Oil change: Every 10,000 miles or 12 months
- Spark plugs: Every 60,000 miles
- Air filter: Every 30,000 miles
- Coolant flush: Every 4 years or 50,000 miles
- Timing chain: Lifetime (no scheduled replacement)
Common Maintenance Tasks
- Check and replace engine air filter
- Inspect and replace spark plugs
- Monitor and top off engine oil
- Inspect and replace serpentine belt
- Check and refill coolant levels
Note: Always refer to the owner's manual for specific maintenance schedules.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General information
- Engine Code
- N55B30
- Engine Type
- Inline 6-cylinder
- Displacement
- 3.0L (2979 cc)
- Configuration
- Turbocharged, direct injection
- Manufacturer
- BMW
- Production Years
- 2014-2016
- Vehicle Model
- 435I
Performance Specifications
- Horsepower
- 300 hp @ 5800-6000 rpm
- Torque
- 300 lb-ft @ 1200-5000 rpm
- Compression Ratio
- 10.2:1
- Redline
- 7000 rpm
- Fuel System
- High-precision direct injection
- Turbocharger
- Twin-scroll turbocharger
Dimensions And Weight
- Engine Length
- 24.5 in (622 mm)
- Engine Width
- 28.3 in (720 mm)
- Engine Height
- 23.6 in (600 mm)
- Dry Weight
- 403 lbs (183 kg)
- Oil Capacity
- 6.5 quarts (6.2 liters)
Fuel System
- Fuel Type
- Premium unleaded (91 octane or higher)
- Fuel injection
- High-precision direct injection
- Fuel Pressure
- 2000 psi (138 bar)
- injector Part Number
- 13537585279
- Fuel Filter Part Number
- 13327798022
Ignition System
- Spark Plug Type
- Bosch ZR5TPP33
- Spark Plug Gap
- 0.028 in (0.7 mm)
- Ignition Coil Part Number
- 12137585253
- Ignition Timing
- Fully electronic, variable
Cooling System
- Coolant Capacity
- 10.6 quarts (10 liters)
- Thermostat Opening Temperature
- 194°F (90°C)
- Radiator Part Number
- 17117586925
- Water Pump Part Number
- 11517586927
- Coolant Type
- BMW Antifreeze/Coolant (G48)
Lubrication System
- Oil Type
- BMW Longlife-01 FE 5W-30
- Oil Capacity
- 6.5 quarts (6.2 liters)
- Oil Filter Part Number
- 11427566309
- Oil Pressure
- 43-58 psi (3-4 bar) at 2000 rpm
- Oil Change interval
- 10,000 miles or 12 months
Emissions System
- Emissions Standard
- EU6, LEV2
- Catalytic Converter Part Number
- 18307585279
- Oxygen Sensor Part Number
- 11787585253
- EGR System
- Integrated into turbocharger
Maintenance Specifications
- Valve Clearance
- Hydraulic, self-adjusting
- Timing Chain
- Double-row, maintenance-free
- Belt Drive
- Serpentine belt with automatic tensioner
- Belt Part Number
- 11287585253
- Service interval
- 10,000 miles or 12 months
Diagnostic Specifications
- OBDII Port Location
- Under dashboard, driver's side
- Diagnostic Codes
-
- P0171
- P0174
- P0300
- P0420
- Scan Tool Compatibility
- BMW ISTA/D, INPA
- Common Issues
-
- High-pressure fuel pump failure
- Valve cover gasket leaks
- Turbocharger wastegate rattle
Service Information Service
Detailed service requirements and schedules for the 3.0L N55 engine
- Oil and filter change
- Inspect and replace air filter if necessary
- Check and top off all fluid levels
- Inspect belts and hoses for wear
Use only BMW-approved fluids and parts
- Replace spark plugs
- Inspect and replace cabin air filter
- Check brake system and pads
- Inspect cooling system for leaks
Perform additional checks if vehicle is driven under severe conditions
- Replace fuel filter
- Inspect and replace serpentine belt if necessary
- Check and replace brake fluid
- Inspect turbocharger system
Consider replacing coolant if not done previously
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 3.0L engine in the 2014-2016 BMW 435i?
What is the horsepower and torque output of the 3.0L engine in the 2014-2016 BMW 435i?
The 3.0L N55 turbocharged inline-6 engine in the 2014-2016 BMW 435i produces 300 horsepower at 5,800-6,000 RPM and 300 lb-ft of torque at 1,200-5,000 RPM.
Q2 What type of fuel system does the 3.0L engine use?
What type of fuel system does the 3.0L engine use?
The 3.0L engine utilizes a direct fuel injection system, which optimizes fuel delivery for improved efficiency and performance.
Q3 What is the recommended oil type and capacity for the 3.0L engine?
What is the recommended oil type and capacity for the 3.0L engine?
The recommended oil type is BMW-approved synthetic 5W-30 or 5W-40. The oil capacity is approximately 6.5 liters (6.9 quarts) including the oil filter.
Q4 What is the compression ratio of the 3.0L engine?
What is the compression ratio of the 3.0L engine?
The compression ratio of the 3.0L N55 engine is 10.2:1, which is optimized for turbocharged performance and efficiency.
Q5 What is the service interval for spark plugs on the 3.0L engine?
What is the service interval for spark plugs on the 3.0L engine?
The recommended service interval for spark plugs is every 60,000 miles or 96,000 kilometers, or as specified by the vehicle's Condition Based Service (CBS) system.
Q6 Does the 3.0L engine require premium fuel?
Does the 3.0L engine require premium fuel?
Yes, BMW recommends using premium unleaded fuel with an octane rating of 91 or higher for optimal performance and to prevent engine knocking.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW N55 Engine Technical Overview
Coming SoonA detailed technical guide covering the design, specifications, and maintenance of the N55 3.0L turbocharged engine.
BMW 435i Owner's Manual
Coming SoonThe official owner's manual for the 2014-2016 BMW 435i, including engine specifications, maintenance schedules, and safety information.
BMW Genuine Parts Catalog
Coming SoonAccess the official BMW parts catalog to find genuine components for the 3.0L engine and other vehicle systems.
BMW Service and Maintenance Guide
Coming SoonA comprehensive guide to recommended service intervals, procedures, and best practices for maintaining your BMW 435i.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.